Relate Spare Parts For use in Canon ADV 6075 6065 6055 6275 6265 6255

01	Upper Fuser Roller (Red)	FC9-9163-010
02	Upper Fuser Roller (Golden)	FC9-9163-010
03	Lower Sleeved Roller	FM4-3160-000
04	Drum Cleaning Blade	FL3-6291-000
05	Fuser Cleaning Web	FY1-1157-000
06	Thermistor-Main	FK2-7683-000
07	Thermistor-Sub	FK2-7693-000
08	Upper Roller Bushing 2Pcs	FC9-8069-000
09	Upper Roller Bearing 2Pcs	XG9-0563-000
10	Upper Picker Finger 6Pcs	FB5-3625-000
11	ADF Pickup Roller	FC8-5577-000
12	ADF Feed Roller	FL2-9608-000
13	ADF Separation Roller	FB2-7777-020
14	Paper Pickup Roller	FC5-2524-000
15	Paper Feed Roller	FC5-2526-000
16	Paper Separation Roller	FC5-2528-000
17	Paper Pickup Roller Kit	FC5-2524-000 (1Pc) FC5-2526-000 (1Pc) FC5-2528-000 (1Pc)

Durables and Consumables Spare Parts for Canon IR 2016 2020 2318 2420

 Ref. Parts name                Parts No. Q'ty Life Remarks
[1] Manual feed pickup roller  FL2-3202-000 1  150K
[2] Manual feed separation pad FL2-3201-000 1  150K
[3] Devrloping unit            FM2-3286-000 1  150K
[4] Transfer roller            FC6-4313-000 1  150K
[5] Fixing unit (120V)         FM2-3345-000 1  150K
Fixing unit (230V)             FM2-3352-000 1  150K

Consumable Spare Parts For Canon IRV 8105 8095 8085 8205 8295 8285

Parts NameParts Number Piece Expected life* COUNTER

Right Deck   Pickup Roller FC5-2524 1 50 C1-PU-RL
Right Deck   Feed Roller FC5-2526 1 50 C2-PU-RL
Right Deck   Separation Roller FC5-2528 1 50 C1-FD-RL
Left Deck    Pickup Roller FC5-2524 1 50 C2-FD-RL
Left Deck    Feed Roller FC5-2526 1 50 C1-SP-RL
Left Deck    Separation Roller FC5-2528 1 50 C2-SP-RL
Cassette 3   Pickup Roller FC5-2524 1 50 C3-PU-RL
Cassette 3   Feed Roller FC5-2526 1 50 C3-FD-RL
Cassette 3   Separatio n Roller FC5-2528 1 50 C3-SP-RL
Cassette 4   Pickup Roller FC5-2524 1 50 C4-PU-RL
Cassette 4   Feed Roller FC5-2526 1 50 C4-FD-RL
Cassette 4   Separation Roller FC5-2528 1 50 C4-SP-RL
Multi-purpose  Tray Separation Roller FB1-8581 1 12 M-FD-RL
Multi-purpose  Tray Feed Roller FC6-6661 1 12 M-SP-RL

Error Code Table E001 E002 E003 E007...... For Canon IR 4570 3570 2870 2270

Code Error name/description
E000 fixing overheating
E001 fixing assembly overheating
E002 fixing assembly low temperature
E003 post-standby fixing low temperature
E007 fixing film rotation error
E010 main motor rotation error
E014 fixing motor rotation error
E019 waste toner case full, waste toner case full sensor error
E020 toner clogging between sub hopper and developing assembly
E024 developing assembly connector disconnection
E025 hopper motor, bottle motor error
E032 NE controller counter error
E064 power supply voltage error (high-voltage)
E100 BD interval error
E110 scanner motor error
E191 communication error for high voltage power supply
E202 CIS home position detection error
E225 CIS light intensity error
E227 reader unit power supply error
E248 backup memory error
E261 zero-cross signal error
E315 image data error
E400 feeder communication error

Error Code

E000 E001 E002 E007

for Canon iR2016J   iR2016   iR2020 iR2016i  iR2020i

Error Code Detail  Code Error Name/Explanation of Error
E000 0000 Fixing temperature abnormal rise
E001
0000 Fixing unit temperature rise detection (by main thermistor)
0001 Fixing unit temperature rise detection (by sub thermistor)
E002 0000 Fixing unit temperature insufficient rise
E003
0000 Low fixing temperature detection after standby (by main thermistor)
0001 Low fixing temperature detection after standby (by sub thermistor)
E007 0000 Fixing film rotation error
E010 0000 Main motor rotation error
E019
0001 Waste toner full detection
0002 Waster toner full detection sensor failure
E052 0000 Duplex unit connection error
E100 0000 BD cycle out of range
E197 0000 Erroneous communication with printer engine
E500 0001 Finisher communication error
E520 0000 Offset error
E531 0000 Stapling error
E540
0001 Paper surface not detected (standard tray)
0002 Not moved within the specified time (standard tray)
0003 Sensor not reached within 3 seconds (standard tray)
0005 Encoder clock failure (standard tray)
E542
0001 Paper surface not detected (optional tray)
0002 Not moved within the specified time (optional tray)
0003 Sensor not reached within 3 seconds (optional tray)
0005 Encoder clock failure (optional tray)
E575 0000 Stack delivery error
E584 0000 Shutter failure
E716 0000 Erroneous communication with optional cassette
E719
0000 Erroneous communication with card reader (serial communication)
0002 Erroneous communication with coin vender (serial communication)
E733 0000 Erroneous communication between controller and printer
E736 0000 CCU communication error
E739 0000 Erroneous communication between controller and network board
E805 0000 Fan failure
E808 0000 Fixing drive circuit failure

Canon ImageRunner 5570 6570 5570N 6570N, Errorcode E590 To E5F9 and Solution

E590 There is a punch motor error. (punch unit)

8001 The punch home position sensor is not detected even when the punch motor has

been driven for 200 msec.

8002 The puncher does not detect the punch back home position sensor while the motor is at

rest at time of punch motor initialization

- Check the punch home position sensor, horizontal registration motor, and punch

driver PCB; thereafter, turn off and then on the main power.

E591 There is a punch dust sensor error. (punch unit)

8001 The incoming light voltage is faulty in the presence of light.

8002 The incoming light voltage is faulty in the absence of light.

- Turn off and then back on the main power.

E592 There is a punch horizontal registration sensor error. (punch unit)

8001 The incoming light voltage is faulty in the presence of light. (trailing edge sensor).

8002 The incoming light is faulty in the absence of light and voltage. (trailing edge sensor)

8003 The incoming light voltage is faulty in the presence of light. (horizontal registration sensor 1)

8004 The incoming light voltage is faulty in the absence of light. (horizontal registration sensor 1)

8005 The incoming light voltage is faulty in the presence of light. (horizontal registrationsensor 2)

8006 The incoming light voltage is faulty in the absence of light. (horizontal registration sensor 2)

8007 The incoming light voltage is faulty in the presence of light. (horizontal registration sensor 3)

8008 The incoming light voltage is faulty in the absence of light. (horizontal registration sensor 3)

8009 The incoming light voltage is faulty in the presence of light. (horizontal registration sensor 4)

800A The incoming light voltage is faulty in the absence of light. (horizontal registration sensor 4)

- turn off and then back on the main Power

E593 There is a punch shift motor error. (punch unit)

8001 In the presence of light, the incoming light voltage HP sensor does not go off.

8002 In the absence of light, the incoming light voltage HP sensor does not go on.

- Turn off and the back on the main power.

E5F0 There is a saddle paper positioning error.

0001 The paper positioning plate home position sensor does not go on even when the paper

positioning plate motor has been driven for 1.33 sec.

paper positioning plate motor (M4S), paper positioning plate home position sensor (PI7S)

0002 The paper positioning plate home position sensor does not go off even when the paper positioning plate motor has been driven for 1 sec. paper positioning plate motor (M4S),paper positioning plate home position sensor (PI7S)

- Check the paper positioning plate motor (M4S) and the paper positioning plate home position sensor (PI7S).

E5F1 There is a saddle paper folding error.

0001 The number of detection pulses of the paper folding motor clock sensor is lower

than a specific value. paper folding motor (M2S), paper folding motor clock sensor (PI4S)

0002 The start of the paper folding home position sensor does not change even when

the paper folding motor has been driven for 3 sec. paper folding motor (M2S), paper folding

motor clock sensor (PI4S)

- Check the paper folding motor (M2S) and the paper folding motor clock sensor  (PI4S).

E5F2 There is a saddle guide error.

0001 The guide home position sensor does not go on even when the guide motor has been driven for 0.455 sec. guide motor (M3S), guide home position sensor (PI13S)

0002 The guide home position sensor does not go off even when the guide motor has been

driven for 1 sec. guide motor (M3S), guide home position sensor (PI13S)

- Check the guide motor (M3S) and the guide home position sensor (PI13S).

E5F3 There is a saddle alignment error.

0001 The aligning plate home position sensor does not go on even when the aligning

motor has been driven for 0.5 sec. (if at time of initialization, 1.67 sec) alignment motor (M5S), aligning plate home position sensor (PI5S)

0002 The aligning plate home position sensor does not go off even when the aligning plate has been driven for 1 sec. alignment motor (M5S), aligning plate home position sensor (PI5S)

- Check the alignment motor (M5S) and the aligning plate home position sensor (PI5S).

E5F4 There is a saddle rear stapler error.

0001 The stitching hone position sensor does not go on even when the stitching motor

(rear) has been driven in reverse for 0.5 sec or more. stitching motor (rear, M6S), stitching

home position sensor (rear, MS5S)

0002 the stitching home position sensor does not go off even when the stitching motor (rear)

has been driven in normal direction for 0.5 sec or more. stitching motor (rear, M6S), stitching

home position sensor (rear, MS5S)

- Check the stitching motor (rear, M6S) and the stitching home position sensor (rear, MS5S).

E5F5 There is a saddle front stapling error.

0001 The stitching home position sensor does not go on even when the stitching motor

(front) has been driven in reverse for 0.5 sec or more. stitching motor (front, M7S), stitching

home position sensor (front, MS7S)

0002 The stitching home position sensor does not go off even when the stitching motor

(front) has been driven in normal direction for 0.5 sec or more. stitching motor (front, M7S), stitching

home position sensor (front, MS7S)

- Check the stitching motor (front, M7S) and the stitching home position sensor (front, MS7S).

E5F6 There is a saddle butting error.

8001 The paper pushing plate home position sensor does not go on even when the paper

pushing plate motor has been driven for 0.3 sec or more.paper pushing plate motor (M8S), paper

pushing plate home position sensor (PI14S)

8002 The paper pushing plate home position sensor does not go off even when the paper

pushing plate motor has been driven for 80 msec. paper pushing plate motor (M8S), paper pushing plate home position sensor (PI14S)

- Check the paper pushing plate motor (M8S) and the paper pushing plate home position sensor (PI14S).

8003 The number of detection pulses of the paper pushing plate motor clock sensor is

lower than a specific value. paper pushing plate motor (M8S), paper pushing plate motor clock sensor (PI1S)

- Check the paper pushing plate motor (M8S) and the paper pushing plate motor clock sensor (PI1S).

8004 The paper pushing plate leading edge sensor does not go off even when the paper

pushing plate motor has been driven for 80 msec. paper pushing plate motor (M8S), paper

pushing plate leading edge position sensor (PI15S)

8005 The paper pushing plate leading edge position sensor does not go on even when

the paper pushing plate has been driven for 0.3 sec or more. paper pushing plate motor (M8S), paper

pushing plate leading edge position sensor (PI15S)

- Check the power pushing plate motor (M8S) and the paper pushing plate leading edge position sensor (PI15S).

E5F9 There is a saddle switch error.

0001 With any of the sensor identifying its respective cover as being closed, the inlet

cover switch is identified as being open for 1 sec from the start of initial rotation or printing:

- inlet cover sensor (PI9S)  - front cover open/closed sensor (PI2S)

- delivery power sensor (PI3S) Or, the front cover switch (MS2S) or the delivery cover switch (MS3S) is open. inlet cover switch (MS1S), front cover switch (MS2S), delivery cover switch (MS3S)

- Check the inlet cover switch (MS1S), front cover switch (MS2S), and the delivery cover switch (MS3S).

0002 With any of the following sensors identifying its respective cover as being closed, the front cover switch is identified as being open for 1 sec or more after the start of initial rotation or printing.

- inlet cover sensor (PI9S) - front cover open/closed sensor (PI2S) - delivery cover sensor (PI3S)

- front cover switch (MS2S), delivery cover switch (MS3S)

- Check the front cover switch (MS2S) and the delivery cover switch (MS3S).

0003 With any of the following sensors identifying its respective cover as being closed, the delivery cover switch is identified as being open for 1 sec or more from the start of initial rotation or printing:

- inlet cover sensor (PI9S) - front cover open/closed sensor (PI2S)

- delivery cover sensor (PI3S) - delivery cover switch (MS3S)

Canon ImageRunner 5570 6570 5570N 6570N, Errorcode E100 To E248 and Solution

E100 There is a BD error.

0001 A check is made of VLOCK at intervals of 100 msec while the laser is on. An error

will be identified if it is not detected 10 times in sequence.

- Replace the laser scanner unit. - Replace the DC controller PCB.

E110 There is a polygon motor error.

0001 - Although the polygon motor has been turned on, VLOCK is not detected at all within 76.5 sec.

- At time of a shift from full-speed to halfspeed control, VLOCK is not detected at all for 7.5 sec.

- At time of half-speed control, a check is made of VLOCK at intervals of 100 msec.

An error will be identified if it is not detected 10 times continuously.

- Replace the laser scanner unit.  - Replace the DC controller PCB.

E121 There is a controller cooling fan error.

0001 Even though the controller cooling fan has been turned on, the controller cooling fan

stop signal has been detected for 5 sec or more.

- Check the connector for any fault in connection. - Replace the fan.

E196 The EEPROM is faulty.

1abb There is a mismatch between the data that has been written in EEPROM and the data

that has been read. (a: chip No. 0 through 5; bb: chip faulty address)

- Initialize the RAM. - Replace the EEPROM. - Replace the DC controller PCB.

2abb The ID in EEPROM that has been read and the ID in ROM are compared. An error

will be identified if they do not match. (a: chip No. 0 through 5; bb: chip faulty address)

3abb When the main power is turned on, the ID in EEPROM and the ID in ROM are compared. An error will be identified if they do not match. (a: chip No. 0 through 5; bb: chip faulty address)

- Check the position and condition of the EEPROM.

- Initialize the RAM. - Replace the EEPROM.  - Replace the DC controller PCB.

E202 There is a scanner HP error.

0001 An error has occurred when the sensor was moved to home position. The scanner HP sensor is faulty; the scanner motor is faulty; the reader controller PCB is faulty.

- Check the connector for any fault in connection.  - Replace the scanner HP sensor.

- Replace the scanner motor. - Replace the reader controller PCB.

0002 An error has occurred when the sensor was moved from home position.

The scanner HP sensor is faulty; the scanner motor is faulty; the reader  controller PCB is faulty.

E225 The intensity of light is inadequate.

0001 At time of shading, the intensity if below a specific level.

- Check the connector for any fault in connection.  - Replace the scanning lamp.

- Replace the inverter PCB.    - Replace the reader controller PCB.

0002 ADFThe intensity is below a specific level  between sheets (ADF).

E227 there is an error in the power supply (24 V).

0001 At power-on, the 24-V port is OFF.

0002 At the start of a job, the 24-V port is OFF.

0003 At the end of a job, the 24-V port is off.

0004 When a load is driven, the 24-V port isOFF.

- Check the connector for any fault in connection.  - Replace the power supply.

E240 The communication between the main controller PCB and the DC controller PCB is faulty.

 0000 There is an error in the communication between the main controller PCB and the CPU of the DC controller PCB.

- Check the connector for any fault in connection.

- Replace the DC controller PCB.   - Replace the main controller PCB.

E248 There is an EEPROM error.

0001 An error has occurred at power-on.

0002 An error has occurred at time of writeoperation.

0003 An error has occurred at time of read  operation after write operation

- Replace the EEPROM.  - Replace the reader controller PCB.