Canon ImageRunner Advance 8105 8095 8085,Errorcode E578 To E584 and Solution

E578 -8001 -05 Title Error in the Paper Return Guide Motor (Finisher-D1)

Remedy 1. The connector of the Paper Return Guide HP Sensor (S112)

or the Paper Return Guide Motor (M112) are disconnected.

2. The wiring of the Paper Return Guide HP Sensor (S112) or
the Paper Return Guide Motor (M112) are faulty.

3. The Paper Return Guide HP Sensor (S112) is faulty.

4. The Paper Return Guide Motor (M112) is faulty.

5. The Finisher Controller PCB is faulty.

Description The paper return guide does not come off the Paper Return Guide HP Sensor when the Paper Return Guide Motor has been driven for 3 seconds.

E578 -8002 -05 Title Error in the Paper Return Guide Motor (Finisher-D1)

Remedy 1. The connector of the Paper Return Guide HP Sensor (S112) or the Paper Return Guide Motor (M112) are disconnected.

2. The wiring of the Paper Return Guide HP Sensor (S112) or the Paper Return Guide Motor (M112) are faulty.

3. The Paper Return Guide HP Sensor (S112) is faulty.

4. The Paper Return Guide Motor (M112) is faulty.

5. The Finisher Controller PCB is faulty.

Description The Paper Return Guide HP Sensor does not detect the paper return guide when the Paper Return Guide Motor has been driven for 3 seconds.

E57B -8001 -05 Title Error in the Paper Trailing Edge Pushing Guide Motor (Finisher-D1)

Remedy 1. The connector of the Paper Trailing Edge Pushing Guide HP Sensor (S113) or the Paper Trailing Edge Pushing Guide Motor (M113) are disconnected.

2. The wiring of the Paper Trailing Edge Pushing Guide HP Sensor (S113) or the Paper Trailing Edge Pushing Guide Motor (M113) are faulty.

3. The Paper Trailing Edge Pushing Guide HP Sensor (S113) is faulty.

4. The Paper Trailing Edge Pushing Guide Motor (M113) is faulty.

5. The Finisher Controller PCB is faulty.

Description The paper trailing edge pushing guide does not come off the Paper Trailing Edge Pushing Guide HP Sensor when the Paper Trailing Edge Pushing Guide Motor has been driven for 3 seconds.

E57B -8002 -05 Title Error in the Paper Trailing Edge Pushing Guide Motor (Finisher-D1)

Remedy 1. The connector of the Paper Trailing Edge Pushing Guide HP Sensor (S113) or the Paper Trailing Edge Pushing Guide Motor (M113) are disconnected.

2. The wiring of the Paper Trailing Edge Pushing Guide HP Sensor (S113) or the Paper Trailing Edge Pushing Guide Motor (M113) are faulty.

3. The Paper Trailing Edge Pushing Guide HP Sensor (S113) is faulty.

4. The Paper Trailing Edge Pushing Guide Motor (M113) is faulty.

5. The Finisher Controller PCB is faulty.

Description The Paper Trailing Edge Pushing Guide HP Sensor does not detect the paper trailing edge pushing guide when the Paper Trailing Edge Pushing Guide Motor has been driven for 3 seconds.

E57C -8001 -05 Title Error in the Processing Tray Paper Retainer Motor (Finisher-D1)

Remedy 1. The connector of the Paper Retainer HP Sensor (S135) or the Processing Tray Paper Retainer Motor (M118) are disconnected.

2. The wiring of the Paper Retainer HP Sensor (S135) or the Processing Tray Paper Retainer Motor (M118) are faulty.

3. The Paper Retainer HP Sensor (S135) is faulty.

4. The Processing Tray Paper Retainer Motor (M118) is faulty.

5. The Finisher Controller PCB is faulty.

Description The paper retainer does not come off the Paper Retainer HP Sensor when the Processing Tray Paper Retainer Motor has been driven for 3 second

E57C -8002 -05 Title Error in the Processing Tray Paper Retainer Motor (Finisher-D1)

Remedy 1. The connector of the Paper Retainer HP Sensor (S135) or the Processing Tray Paper Retainer Motor (M118) are disconnected.

2. The wiring of the Paper Retainer HP Sensor (S135) or the Processing Tray Paper Retainer Motor (M118) are faulty.

3. The Paper Retainer HP Sensor (S135) is faulty.

4. The Processing Tray Paper Retainer Motor (M118) is faulty.

5. The Finisher Controller PCB is faulty.

Description The Paper Retainer HP Sensor does not detect the paper retainer when the Processing Tray Paper Retainer Motor has been driven for 3 seconds.

E583 -8001 -05 Title Error in the Tray Auxiliary Guide Motor (Finisher-D1)

Remedy 1. The connector of the Tray Auxiliary Guide Front HP Sensor (S137) or the Tray Auxiliary Guide Rear HP Sensor (S136) are disconnected.

2. The connector of the Tray Auxiliary Guide Motor (M120) is disconnected.

3. The wiring of the Tray Auxiliary Guide Front HP Sensor (S137) or the Tray Auxiliary Guide Rear HP Sensor (S136) are faulty.

4. The wiring of the Tray Auxiliary Guide Motor (M120) is faulty.

5. The Tray Auxiliary Guide Front HP Sensor (S137) is faulty.

6. The Tray Auxiliary Guide Rear HP Sensor (S136) is faulty.

7. The Tray Auxiliary Guide Motor (M120) is faulty.

8. The Finisher Controller PCB is faulty.

Description The tray auxiliary guide does not come off the Tray Auxiliary Guide Front/Rear HP Sensors when the Tray Auxiliary Guide Motor has been driven for 3 seconds.

E583 -8002 -05 Title Error in the Tray Auxiliary Guide Motor (Finisher-D1)

Remedy 1. The connector of the Tray Auxiliary Guide Front HP Sensor (S137) or the Tray Auxiliary Guide Rear HP Sensor (S136) are disconnected.

2. The connector of the Tray Auxiliary Guide Motor (M120) is disconnected.

3. The wiring of the Tray Auxiliary Guide Front HP Sensor (S137) or the Tray Auxiliary Guide Rear HP Sensor (S136) are faulty.

4. The wiring of the Tray Auxiliary Guide Motor (M120) is faulty.

5. The Tray Auxiliary Guide Front HP Sensor (S137) is faulty.

6. The Tray Auxiliary Guide Rear HP Sensor (S136) is faulty.

7. The Tray Auxiliary Guide Motor (M120) is faulty.

8. The Finisher Controller PCB is faulty.

Description The Tray Auxiliary Guide Front/Rear HP Sensors does nor detect the tray auxiliary guide when the Tray Auxiliary Guide Motor has been driven for 3 seconds.

E584 -0002 -05 Title Error in the Stack Delivery Lower/Shutter Motor (Finisher-D1)

Remedy 1. The connector of the Shutter HP Sensor (S106) or the Stack Delivery Lower/Shutter Motor (M122) are disconnected.

2. The wiring of the Shutter HP Sensor (S106) or the Stack Delivery Lower/Shutter Motor (M122) are faulty.

3. The Shutter HP Sensor (S106) is faulty.

4. The Stack Delivery Lower/Shutter Motor (M122) is faulty.

5. The Finisher Controller PCB is faulty.

Description The Shutter HP Sensor does not detect the shutter when the Stack Delivery Lower/Shutter Motor has been driven for 3 seconds.

E584 -8001 -05 Title Error in the Stack Delivery Lower/Shutter Motor (Finisher-D1)

Remedy 1. The connector of the Shutter HP Sensor (S106) or the Stack Delivery Lower/Shutter Motor (M122) are disconnected.

2. The wiring of the Shutter HP Sensor (S106) or the Stack Delivery Lower/Shutter Motor (M122) are faulty.

3. The Shutter HP Sensor (S106) is faulty.

4. The Stack Delivery Lower/Shutter Motor (M122) is faulty.

5. The Finisher Controller PCB is faulty.

Description The shutter does not come off the Shutter HP Sensor when the Stack Delivery Lower/Shutter Motor has been driven for 3 seconds

E584 -8003 -05 Title Error in the Stack Delivery Lower/Shutter Motor (Finisher-D1)

Remedy 1. The connector of the Shutter Close Detection Sensor (S148) or the Stack Delivery Lower/Shutter Motor (M122) are disconnected.

2. The wiring of the Shutter Close Detection Sensor (S148) or the Stack Delivery Lower/Shutter Motor (M122) are faulty.

3. The Shutter Close Detection Sensor (S148) is faulty.

4. The Stack Delivery Lower/Shutter Motor (M122) is faulty.

5. The Finisher Controller PCB is faulty.

Description The shutter does not come off the Shutter Close Detection Sensor when the Stack Delivery Lower/Shutter Motor has been driven for 3 seconds.

E584 -8004 -05 Title Error in the Stack Delivery Lower/Shutter Motor (Finisher-D1)

Remedy 1. The connector of the Shutter Close Detection Sensor (S148) or the Stack Delivery Lower/Shutter Motor (M122) are disconnected.

2. The wiring of the Shutter Close Detection Sensor (S148) or the Stack Delivery Lower/Shutter Motor (M122) are faulty.

3. The Shutter Close Detection Sensor (S148) is faulty.

4. The Stack Delivery Lower/Shutter Motor (M122) is faulty.

5. The Finisher Controller PCB is faulty.

Description The Shutter Close Detection Sensor does not detect the

shutter when the Stack Delivery Lower/Shutter Motor has been driven for 3 seconds.