Canon ImageRunner Advance 8205 8295 8285,Errorcode E590 To E593 and Solution

E590 -8000 -05 Title Error in punch operation

Detection description Clock error of punch motor is detected.

Remedy 1. Check of punch motor 2. Check of punch motor FG sensor (SR38)

3. Replacement of punch unit  4. Replacement of finisher controller PCB

E590 -8001 -05 Title a. Error in punch operation (Finisher-Q1)

b. Error in the Punch Motor (Finisher-N1)

Detection description  a. If the punch motor HP sensor (PS36) cannot be detected

within 200 msec after the punch motor starts driving.

b. During initialization, the Punch HP Sensor does not detect the Puncher when the Punch Motor has been driven for 500 msec. after the Puncher has come off the Punch HP Sensor. After initialization, the Punch Motor does not return to home position.

Remedy a-1. Check of punch motor

a-2. Check of punch motor FG sensor (SR38)

a-3. Replacement of punch unit

a-4. Replacement of finisher controller PCB

b-1. The connector of the Punch HP Sensor (S104) or the Punch Motor Clock Sensor (S105) are disconnected.

b-2. The connector of the Punch Motor (M102) is disconnected.

b-3. The wiring of the Punch HP Sensor (S104) or the Punch Motor Clock Sensor (S105) are faulty.

b-4. The wiring of the Punch Motor (M102) is faulty.

b-5. The Punch HP Sensor (S104) is faulty.

b-6. The Punch Motor Clock Sensor (S105) is faulty.

b-7. The Punch Motor (M102) is faulty.

b-8. The Puncher Driver PCB (PCB1) is faulty.

b-9. The Finisher Controller PCB is faulty.

E590 -8002 -05 Title a. Error in punch operation (Finisher-Q1) b. Error in the Punch Motor (Finisher-N1)

Detection description  a. If the punch motor HP sensor (PS36) is still detected after

200 msec from the start of punch motor driving.

b. The Puncher does not come off the Punch HP Sensor when the Punch Motor has been driven for 200 msec. The Puncher does not come off the Punch HP Sensor during initialization.

Remedy a-1. Check of punch motor

a-2. Check of punch motor FG sensor (SR38)

a-3. Replacement of punch unit

a-4. Replacement of finisher controller PCB

b-1. The connector of the Punch HP Sensor (S104) or the

Punch Motor Clock Sensor (S105) are disconnected.

b-2. The connector of the Punch Motor (M102) is disconnected.

b-3. The wiring of the Punch HP Sensor (S104) or the Punch Motor Clock Sensor (S105) are faulty.

b-4. The wiring of the Punch Motor (M102) is faulty.

b-5. The Punch HP Sensor (S104) is faulty.

b-6. The Punch Motor Clock Sensor (S105) is faulty.

b-7. The Punch Motor (M102) is faulty.

b-8. The Puncher Driver PCB (PCB1) is faulty.

b-9. The Finisher Controller PCB is faulty.

E590 -8003 -05 Title Punch Motor clock error (Finisher-N1)

Detection description The drive pulse of the Punch Motor does not reach 100 pulses

when the Punch Motor has been driven for 100 msec. after the Puncher has come off the Punch HP Sensor.

Remedy 1. The connector of the Punch HP Sensor (S104) or the Punch

Motor Clock Sensor (S105) are disconnected.

2. The connector of the Punch Motor (M102) is disconnected.

3. The wiring of the Punch HP Sensor (S104) or the Punch Motor Clock Sensor (S105) are faulty.

4. The wiring of the Punch Motor (M102) is faulty.

5. The Punch HP Sensor (S104) is faulty.

6. The Punch Motor Clock Sensor (S105) is faulty.

7. The Punch Motor (M102) is faulty.

8. The Puncher Driver PCB (PCB1) is faulty.

9. The Finisher Controller PCB is faulty.

E590 -8004 -05 Title Error in punch operation

Detection description If the punch motor HP sensor (PS36) cannot be detected at

the operation switch of 2/hole/3-hole, 2-hole/4-hole (France).

Remedy 1. Check of punch motor   2. Check of punch motor FG sensor (SR38)

3. Replacement of punch unit  4. Replacement of finisher controller PCB

E593 -8001 -05 Title Error in the Punch Slide Motor (Finisher-N1)

Detection description The punch unit does not come off the Horizontal Registration

HP Sensor when the Punch Slide Motor has been driven for 680 msec.

Remedy 1. The connector of the Horizontal Registration HP Sensor

(S101) or the Punch Slide Motor (M101) are disconnected.

2. The wiring of the Horizontal Registration HP Sensor (S101)

or the Punch Slide Motor (M101) are faulty.

3. The Horizontal Registration HP Sensor (S101) is faulty.

4. The Punch Slide Motor (M101) is faulty.

5. The Puncher Driver PCB (PCB1) is faulty.

6. The Finisher Controller PCB is faulty.

E593 -8002 -05 Title Error in the Punch Slide Motor (Finisher-N1)

Detection description The Horizontal Registration HP Sensor does not detect the

punch unit when the Punch Slide Motor has been driven for 3.3 seconds.

Remedy 1. The connector of the Horizontal Registration HP Sensor

(S101) or the Punch Slide Motor (M101) are disconnected.

2. The wiring of the Horizontal Registration HP Sensor (S101)

or the Punch Slide Motor (M101) are faulty.

3. The Horizontal Registration HP Sensor (S101) is faulty.

4. The Punch Slide Motor (M101) is faulty.

5. The Puncher Driver PCB (PCB1) is faulty.

6. The Finisher Controller PCB is faulty.