E500 -0000 -05 Title Error in IPC communication (Finisher-N1)
Detection description Communication
failed between the host machine and the Finisher.
Remedy
1. IPC cable is disconnected.
2.
IPC cable is faulty.
3.
The Finisher Controller PCB is faulty.
4. The
host machine Controller PCB is faulty.
E500 -0001 -05 Title a. Error in ARCNET communication b. Error in IPC communication
Detection
description
a.
Communication failed between the host machine and the
Finisher
/ Paper Folding Unit / Booklet Trimmer.
b.
Timeout error of communication with the host machine
Remedy
a-1. Connection failure of the ARCNET cable connection.
a-2.
ARCNET PCB
a-3.
Finisher controller PCB
a-4.
Connection between Finisher and Paper Folding Unit /
Booklet
Trimmer
a-5.
DC controller PCB / Booklet Trimmer controller PCB
b-1.
IPC cable communication
b-2.
Finisher controller PCB
b-3.
Host machine controller PCB
b-4.
Failure in the IPC communication cable
b-5.
Connection between Finisher and Paper Folding Unit /
Booklet
Trimmer
b-6.
DC controller PCB / Booklet Trimmer controller PCB
* If
any of those is not assumed as a cause, this error might
have
occurred on another option.
E500 -0001 -05 Title Error in communication between the host machine - ACC
Detection
description
Communication
failed between the host machine and the
Professional
Puncher / Integration Unit.
Remedy
1. Connection failure between the host machine and the
Professional
Puncher Integration Unit
2.
Failure of interface PCB (PCB5) of Professional Puncher
Integration
Unit
3.
Communication between Professional Puncher and
Integration
Unit
4.
Professional Puncher controller PCB
* If
any of those is not assumed as a cause, this error might
have occurred on another
option.
E500 -0001 -05 Title Error in ARCNET communication
Detection
description
Communication
failed between the host machine and the
Document
Insertion Unit.
Remedy
1. Connection failure of Inserter DC controller PCB/Option
controller
PCB
2.
Connection failure of Communication cable
3.
Connection failure of Communication driver PCB
4.
Failure in Inserter DC controller PCB/Option controller PCB
5.
Failure in communication cable
6.
Failure in Communication driver PCB
* If
any of those is not assumed as a cause, this error might
have
occurred on another option.
E500 -0022 -05 Title Error due to unexpected operation
Detection
description
-
Remedy
If an error cannot be released by turning OFF/ON the power,
contact
a sales company.
E500 -0098 -05 Title Error due to unexpected operation
Detection
description
-
Remedy
If an error cannot be released by turning OFF/ON the power,
contact
a sales company.
E500 -0099 -05 Title Error due to unexpected operation
Detection
description
-
Remedy
If an error cannot be released by turning OFF/ON the power,
contact
a sales company.
E500 -00A1 -05 Title Error due to unexpected operation
Detection
description
-
Remedy
If an error cannot be released by turning OFF/ON the power,
contact
a sales company.
E500 -00A2 -05 Title Error due to unexpected operation
Detection
description
-
Remedy
If an error cannot be released by turning OFF/ON the power,
contact
a sales company.
E500 -00A3 -05 Title Error due to unexpected operation
Detection
description
-
Remedy
If an error cannot be released by turning OFF/ON the power,
contact a sales company.
E500 -00A4 -05 Title Error due to unexpected operation
Detection
description
-
Remedy
If an error cannot be released by turning OFF/ON the power,
contact
a sales company.
E500 -00D4 -05 Title Error due to unexpected operation
Detection
description
-
Remedy
If an error cannot be released by turning OFF/ON the power,
contact
a sales company.
E503 -0001 -05 Title Error in communication between the Finisher - Saddle
Stitcher (Finisher-N1)
Detection
description
Communication
failed between the Finisher and the Saddle
Stitcher
Remedy
1. The connector on the wiring between the Finisher
Controller
PCB and the Saddle Stitcher Controller PCB is
disconnected.
2.
The wiring between the Finisher Controller PCB and the
Saddle
Stitcher Controller PCB is faulty.
3.
The Finisher Controller PCB is faulty.
4.
The Saddle Stitcher Controller PCB is faulty.
E503 -0002 -05 Title Error in communication between the Finisher - Saddle
Stitcher (Finisher-N1)
Detection description Communication failed between the Finisher and the Saddle Stitcher
Remedy 1. The connector on the wiring between the
Finisher Controller PCB and the Saddle Stitcher Controller PCB is disconnected.
2.
The wiring between the Finisher Controller PCB and the Saddle Stitcher Controller PCB is faulty.
3.
The Finisher Controller PCB is faulty.
4.
The Saddle Stitcher Controller PCB is faulty.
E503 -0003 -05 Title Professional Puncher-C1 communication/connection
error
Detection description The power of the Professional Puncher-C1 was OFF, or a
serial
communication error was detected at the puncher side.
Remedy 1. Check that the power of the Professional
Puncher-C1 is ON.
2.
Check the connection between the Professional Puncher-C1
and
the Professional Puncher Integration Unit-B1.
3.
Replace the communication cable between the Professional
Puncher-C1
and the Professional Puncher Integration Unit-B1.
E503 -0006 -05 Title Error in communication between the finisher - paper
folding unit
Detection description Communication failed between the finisher - paper folding unit
Remedy 1. Connector on the finisher controller PCB is
disconnected.
2.
Connector on the paper folding unit DC controller PCB is disconnected.
3.
Finisher controller PCB is faulty.
4.
Paper folding unit DC controller PCB is faulty.
E503 -0021 -05 Title Error in communication between the Finisher -
Insertion Unit (Finisher-N1)
Detection description Communication failed between Finisher - Insertion Unit
Remedy 1. The connector on the cable between the
Finisher and the Insertion Unit is disconnected.
2.
The cable between the Finisher and the Insertion Unit is faulty.
3.
The Finisher Controller PCB is faulty.
4.
The Insertion Unit Controller PCB is faulty.
E503 -0022 -05 Title Error in communication between the Finisher -
Insertion Unit
(Finisher-N1/Document Insertion Unit-K1)
Detection description Communication failed between Finisher - Insertion Unit
Remedy 1. The connector on the cable between the
Finisher and the Insertion Unit is disconnected.
2.
The cable between the Finisher and the Insertion Unit is faulty.
3.
The Finisher Controller PCB is faulty.
4.
The Insertion Unit Controller PCB is faulty.
E503 -0041 -05 Title Error in communication between the Finisher -
Integration Unit (Finisher-N1)
Detection description Communication failed between Finisher - Integration Unit
Remedy 1. The connector on the cable between the
Finisher and the Integration Unit is disconnected.
2.
The cable between the Finisher and the Integration Unit is faulty.
3.
The Finisher Controller PCB is faulty.
4.
The Integration Controller PCB is faulty.
E503 -0042 -05 Title Error in communication between the Finisher -
Integration Unit (Finisher-N1)
Detection description Communication failed between Finisher - Integration Unit
Remedy 1. The connector on the cable between the
Finisher and the Integration Unit is disconnected.
2.
The cable between the Finisher and the Integration Unit is faulty.
3.
The Integration Controller PCB is faulty.
4.
The Finisher Controller PCB is faulty.
E503 -0051 -05 Title Error in communication between the Integration Unit - Professional Puncher (Finisher-N1)
Detection description Communication failed between the Integration Unit -
Professional
Puncher
Remedy 1. The connector on the cable between the
Integration Unit
and
the Professional Puncher is disconnected.
2.
The cable between the Integration Unit and the Professional Puncher is faulty.
3.
The Integration Controller PCB is faulty.
4.
The Professional Puncher Controller PCB is faulty.
E503 -0053 -05 Title Error in communication between the Integration Unit -
Professional Puncher (Professional Puncher Integration Unit-B1)
Detection description Communication failed between the Integration Unit -
Professional
Puncher (Error in communication of Professional Puncher)
Remedy 1. The connector on the cable between the
Integration Unit and the Professional Puncher is disconnected.
2.
The cable between the Integration Unit and the Professional
Puncher
is faulty.
3. The
Integration Controller PCB is faulty.
4.
The Professional Puncher Controller PCB is faulty.
E503-0061 -05 Title Error in communication between the Finisher - Paper
Folding Unit (Finisher-N1)
Detection description Communication failed between the Finisher - Paper Folding Unit
Remedy 1. The connector on the cable between the
Finisher and the Paper Folding Unit is disconnected.
2.
The cable between the Finisher and the Paper Folding Unit is faulty.
3.
The Finisher Controller PCB is faulty.
4.
The Paper Folding Unit Controller PCB is faulty.
E503 -0062 -05 Title Error in communication between the Finisher - Paper
Folding
Unit (Paper Folding Unit-H1/Finisher-N1)
Detection description Communication failed between the Finisher - Paper Folding Unit
Remedy 1. The connector on the cable between the
Finisher and the
Paper
Folding Unit is disconnected.
2.
The cable between the Finisher and the Paper Folding Unit is faulty.
3.
The Finisher Controller PCB is faulty.
4.
The Paper Folding Unit Controller PCB is faulty.
E503 -0081 -05 Title Error in communication between the Saddle Stitcher –
Trimmer (Finisher-N1)
Detection description Communication failed between the Finisher - Trimmer
Remedy 1. The connector on the wiring between the Saddle
Stitcher and the Trimmer is disconnected.
2.
The wiring between the Saddle Stitcher and the Trimmer is faulty.
3.
The Trimmer Controller PCB is faulty.
4.
The Saddle Stitcher Controller PCB is faulty.
5.
The Finisher Controller PCB is faulty.
E503 -0082 -05 Title Error in communication between the Saddle Stitcher –
Trimmer (Finisher-N1)
Detection description Communication failed between the Finisher - Trimmer
Remedy 1. The connector on the wiring between the
Saddle Stitcher and the Trimmer is disconnected.
2.
The wiring between the Saddle Stitcher and the Trimmer is faulty.
3.
The Trimmer Controller PCB is faulty.
4.
The Saddle Stitcher Controller PCB is faulty.
5.
The Finisher Controller PCB is faulty.
E503 -8004 -05 Title Error in option communication (trimmer)
Detection description Communication cannot be make with trimmer.
Remedy 1. Check the connection of ARCNET cable 2. Communication PCB
3.
Finisher controller PCB
E505 -0001 -05 Title Finisher back-up RAM (EEPROM) error (Finisher-N1)
Detection description The checksum for the EEPROM data has an error. (The value
written
in EEPROM and the value extracted from EEPROM doesn’t conform.)
Remedy The Finisher Controller PCB is faulty.
E505 -0003 -05 Title Insertion unit back-up RAM error (Finisher-N1)
Detection description The value written in EEPROM and the value extracted from
EEPROM
doesn’t conform.
Remedy The Insertion Unit Controller PCB is faulty.
E505 -0005 -05 Title Paper Folding Unit backup RAM error (Paper Folding
Unit-H1/ Finisher-N1)
Detection description The value written in EEPROM and the value extracted from EEPROM doesn’t conform.
Remedy The Paper Folding Unit Controller PCB is faulty.
E505 -0008 -05 Title Error in reading of multi functional folding machine
Detection description Reading of EEPROM of multi functional folding machine failed.
Remedy EEPROM
E505 -0009 -05 Title Error in writing of multi functional folding machine
Detection description Writing of EEPROM of multi functional folding machine failed.
Remedy EEPROM
E509 -0002 -05 Title Error in BootROM
Detection description Combination of finisher controller and BootROM is mismatch.
Remedy BootROM
E509 -0002 -05 Title Name mismatch between BOOTROM of integration unit and firmware
Detection description Software combination error of BOOTROM and firmware is detected.
Remedy Failure in DC controller PCB (PCB1) of
integration unit
E509 -0004 -05 Title Error in trimmer B1 connection
Detection description Trimmer B1 is connected.
Remedy Different trimmer (trimmer B1) connection
No comments:
Post a Comment