Thousands of Parts and Free Shipping
E5E1 -0001 -05 Title Tray Lift Motor of Paper Folding Unit failed to go through HP (Document Insertion Unit-L1)
Remedy 1. Connector of the Tray Lift Motor (M2) is disconnected
2. Tray Lift Motor (M2) is faulty
3. Connector of the Paper Feed Sensor (S3) is disconnected
4. Paper Feed Sensor is faulty
Description The Paper Feed Sensor (S3) did not turned ON when the Inserter paper feed tray moved up.
E5E1 -0002 -05 Title Tray Lift Motor of Paper Folding Unit failed to return to HP (Document Insertion Unit-L1)
Remedy 1. Connector of the Tray Lift Motor (M2) is disconnected
2. Tray Lift Motor (M2) is faulty 3. Connector of the Tray Lower Limit Sensor (S5) is disconnected
4. Tray Lower Limit Sensor (S5) is faulty
Description During initialization or lowering of the Inserter paper feed tray,
the Tray Lower Limit Sensor (S5) has not turned ON within the specified time.
E5E1 -8001 -05 Title Tray Lift Motor of Paper Folding Unit failed to go through HP (Document Insertion/Folding Unit-H1)
Remedy 1. Connector of the Tray Lift Motor (M2) is disconnected
2. Tray Lift Motor (M2) is faulty
3. Connector of the Paper Feed Sensor (S3) is disconnected
4. Paper Feed Sensor (S3) is faulty
Description The Paper Feed Sensor (S3) did not turned ON when the Inserter paper feed tray moved up.
E5E1 -8002 -05 Title Tray Lift Motor of Paper Folding Unit failed to return to HP
(Document Insertion/Folding Unit-H1)
Remedy 1. Connector of the Tray Lift Motor (M2) is disconnected
2. Tray Lift Motor (M2) is faulty
3. Connector of the Tray Lower Limit Sensor (S5) is disconnected
4. Tray Lower Limit Sensor (S5) is faulty
Description During initialization or lowering of the Inserter paper feed tray,
the Tray Lower Limit Sensor (S5) has not turned ON within the specified time.
E5F0 -8001 -05 Title Paper positioning plate home position error (Finisher-E1)
Remedy 1. The Paper Positioning Plate Home Position Sensor (PI7) is faulty.
2. The positioning plate drive mechanism is faulty.
3. The Paper Positioning Plate Motor (M4) is faulty.
4. The Saddle Stitcher Controller PCB is faulty.
Description The paper positioning plate home positio Sensor does not
turn ON when the Paper Positioning Plate Motor has been driven for 1500 pulses.
E5F0 -8002 -05 Title Paper positioning plate home position error (Finisher-E1)
Remedy 1. The Paper Positioning Plate Home Position Sensor (PI7) is faulty.
2. The wiring between the Finisher Controller PCB and Stack
Ejection Motor, and between the Finisher Controller PCB and Shutter Clutch is faulty.
3. The positioning plate drive mechanism is faulty.
4. The Paper Positioning Plate Motor (M4) is faulty.
5. The Saddle Stitcher Controller PCB is faulty.
Description The Paper Positioning Plate Home Position Sensor does not turn OFF when the Paper Positioning Plate Motor has been driven for 300 pulses.
E5F1 -8001 -05 Title Paper Ffolding Motor lock error (Finisher-E1)
Remedy 1. The Paper Folding Motor Clock Sensor (PI4) and Paper
Ffolding Home Position Sensor (PI21) is faulty.
2. The paper folding roller drive mechanism is faulty.
3. The Paper Folding Motor (M2) is faulty.
4. The Saddle Stitcher Controller PCB is faulty.
Description The feed speed of the paper fold roller reaches 5 mm/sec or less.
E5F1 -8002 -05 Title Paper positioning plate home position error (Finisher-E1)
Remedy 1. The Paper Folding Motor Clock Sensor (PI4) and Paper Ffolding Home Position Sensor (PI21) is faulty.
2. The paper folding roller drive mechanism is faulty.
3. The Paper Folding Motor (M2) is faulty.
4. The Saddle Stitcher Controller PCB is faulty.
Description The status of the Paper Fold Home Position Sensor does
not change when the paper fold Motor has been driven for 3 seconds.
E5F2 -8001 -05 Title Guide home position error (Finisher-E1)
Remedy 1. The Guide Home Position Sensor (PI13) is faulty.
2. The guide plate drive mechanism is faulty.
3. The Guide Motor (M3) is faulty.
4. The Saddle Stitcher Controller PCB is faulty.
Description The Guide Home Position Sensor does not turn ON when the
Guide Motor has been driven for 700 pulses.
E5F2 -8002 -05 Title Guide home position error (Finisher-E1)
Remedy 1. The Guide Home Position Sensor (PI13) is faulty.
2. The guide plate drive mechanism is faulty.
3. The Guide Motor (M3) is faulty.
4. The Saddle Stitcher Controller PCB is faulty.
Description The Guide Home Position Sensor does not turn OFF when
the Guide Motor has been driven for 50 pulses.
E5F3 -8001 -05 Title Aligning plate home position error (Finisher-E1)
Remedy 1. The Aligning Plate Home Position Sensor (PI5) is faulty.
2. The aligning plate drive mechanism is faulty.
3. The Aligning Motor (M5) is faulty.
4. The Saddle Stitcher Controller PCB is faulty.
Description The Aligning Plate Home Position Sensor does not turn ON
when the Aligning Motor has been driven for 500 pulses.
E5F3 -8002 -05 Title Aligning plate home position error (Finisher-E1)
Remedy 1. The Aligning Plate Home Position Sensor (PI5) is faulty.
2. The aligning plate drive mechanism is faulty.
3. The Aligning Motor (M5) is faulty.
4. The Saddle Stitcher Controller PCB is faulty.
Description The Aligning Plate Home Position Sensor does not turn OFF
when the Aligning Motor has been driven for 50 pulses.
E5F4 -8001 -05 Title Stitcher (rear) home position error (Finisher-E1)
Remedy 1. The Stitcher Home Position Sensor (rear) (SW5) is faulty.
2. The Stitcher (rear) is faulty.
3. The Saddle Stitcher Controller PCB is faulty.
Description The Stitcher Home Position Sensor does not turn ON when
the Stitch Motor (rear) has been driven backward for 0.5 sec.
E5F4 -8002 -05 Title Stitcher (rear) home position error (Finisher-E1)
Remedy 1. The Stitcher Home Position Sensor (rear) (SW5) is faulty.
2. The Stitcher (rear) is faulty.
3. The Saddle Stitcher Controller PCB is faulty.
Description The stitching home position Sensor does not turn OFF when
the Stitch Motor (rear) has been driven forward for 0.5 sec.
E5F5 -8001 -05 Title Stitcher (front) home position error (Finisher-E1)
Remedy 1. The Stitcher Home Position Sensor (front) (SW7) is faulty.
2. The Stitcher (front) is faulty.
3. The Saddle Stitcher Controller PCB is faulty.
Description The Stitcher Home Position Sensor does not turn ON when
the Stitch Motor (front) has been driven forward for 0.5 sec.
E5F5 -8002 -05 Title Stitcher (front) home position error (Finisher-E1)
Remedy 1. The Stitcher Home Position Sensor (front) (SW7) is faulty.
2. The Stitcher (front) is faulty.
3. The Saddle Stitcher Controller PCB is faulty.
Description The Stitcher Home Position Sensor does not turn OFF when
the Stitch Motor (front) has been driven backward for 0.5 sec.
E5F6 -8001 -05 Title Paper pushing plate home position error (Finisher-E1)
Remedy 1. The Paper Pushing Plate Home Position Sensor (PI14),
Paper Pushing Plate Top Position Sensor (PI15), and
Paper Pushing Plate Motor Clock Sensor (PI1) is faulty.
2. The paper pushing plate drive mechanism is faulty.
3. The Paper Pushing Plate Motor (M8) is faulty.
4. The Saddle Stitcher Controller PCB is faulty.
Description The Paper Pushing Plate Home Position Sensor does not
turn ON when the Paper Pushing Plate Motor has been driven for 0.5 sec.
E5F6 -8002 -05 Title Paper pushing plate home position error (Finisher-E1)
Remedy 1. The Paper Pushing Plate Home Position Sensor (PI14),
Paper Pushing Plate Top Position Sensor (PI15), and Paper Pushing Plate Motor Clock Sensor (PI1) is faulty.
2. The paper pushing plate drive mechanism is faulty.
3. The Paper Pushing Plate Motor (M8) is faulty.
4. The Saddle Stitcher Controller PCB is faulty.
Description The Paper Pushing Plate Home Position Sensor does not
turn OFF when the Paper Pushing Plate Motor has been driven for 150 msec.
E5F6 -8003 -05 Title Paper Pushing Plate Motor clock error (Finisher-E1)
Remedy 1. The Paper Pushing Plate Home Position Sensor (PI14),
Paper Pushing Plate Top Position Sensor (PI15), and Paper Pushing Plate Motor Clock Sensor (PI1) is faulty.2. The paper pushing plate drive mechanism is faulty.
3. The Paper Pushing Plate Motor (M8) is faulty.
4. The Saddle Stitcher Controller PCB is faulty.
Description The number of pulses detected by the Paper Pushing Plate Motor Clock Sensor is 6 pulses or less.
E5F6 -8004 -05 Title Pushing position error (Finisher-E1)
Remedy 1. The Paper Pushing Plate Home Position Sensor (PI14),
Paper Pushing Plate Top Position Sensor (PI15), and
Paper Pushing Plate Motor Clock Sensor (PI1) is faulty.
2. The paper pushing plate drive mechanism is faulty.
3. The Paper Pushing Plate Motor (M8) is faulty.
4. The Saddle Stitcher Controller PCB is faulty.
Description The Paper Pushing Plate Leading Edge Position Sensor does
not turn ON when the Paper Pushing Plate Motor has been driven for 0.1 sec.
E5F6 -8005 -05 Title Pushing position error (Finisher-E1)
Remedy 1. The Paper Pushing Plate Home Position Sensor (PI14),
Paper Pushing Plate Top Position Sensor (PI15), and Paper Pushing Plate Motor Clock Sensor (PI1) is faulty.
2. The paper pushing plate drive mechanism is faulty.
3. The Paper Pushing Plate Motor (M8) is faulty.
4. The Saddle Stitcher Controller PCB is faulty.
Description The Paper Pushing Plate Leading Edge Position Sensor does
not turn OFF when the Paper Pushing Plate Motor has been driven for 0.5 sec.
Thousands of Parts and Free Shipping
No comments:
Post a Comment