Errorcode E551 To E584 For Canon ImageRunner Advance 6255 6265 6275

Thousands of Parts and Free Shipping

 

E551-0011 -05 Title Error in the Power Supply Fan of the Insertion Unit

Detection description The loch signal is detected for the specified times while the

fan operates.

Remedy 1. The connector of the Fan (F1) is disconnected.

2. The wiring of the Fan (F1) is faulty.

3. The Fan (F1) is faulty. 4. The Insertion Unit Controller PCB is faulty

E551-0021 -05 Title Error in the Power Supply Fan of the Paper Folding Unit

Detection description

The loch signal is detected for the specified times while the fan operates.

Remedy 1. The connector of the Fan (F1) is disconnected.

2. The wiring of the Fan (F1) is faulty. 3. The Fan (F1) is faulty.

4. The Paper Folding Unit Controller PCB is faulty.

E562-8001 -05 Title Error in Slowing Timing Sensor (Document Insertion/Folding Unit-H1)

Detection description The receiving-light intensity failed to be within the threshold although the emitting-light intensity is adjusted to be within the threshold when adjusting the Sensor.

Remedy 1. Connector of the Slowing Timing Sensor (S24) is disconnected.

2. Slowing Timing Sensor (S24) is faulty.

E562-8002 -05 Title Error in Disengagement Timing Sensor (Document Insertion/

Folding Unit-H1)

Detection description The receiving-light intensity failed to be within the threshold

although the emitting-light intensity is adjusted to be within the threshold when adjusting the Sensor.

Remedy 1. Connector of the Disengagement Timing Sensor (S21) is disconnected.

2. Disengagement Timing Sensor (S21) is faulty.

E562-8003 -05 Title Error in Folding Position Accuracy Sensor (Document

Insertion/Folding Unit-H1)

Detection description The receiving-light intensity failed to be within the threshold

although the emitting-light intensity is adjusted to be within the threshold when adjusting the Sensor.

Remedy 1. Connector of the Folding Position Accuracy Sensor (S23) is disconnected.

2. Folding Position Accuracy Sensor (S23) is faulty.

E562-8004 -05 Title Error in the Upper Stopper HP Sensor (Document Insertion/

Folding Unit-H1)

Detection description

The receiving-light intensity failed to be within the threshold although the emitting-light intensity is adjusted to be within the threshold when adjusting the Sensor.

Remedy 1. Connector of the Upper Stopper HP Sensor (S16) is disconnected.

2. Upper Stopper HP Sensor (S16) is faulty.

E569-8001 -05 Title Upper Stopper Motor of Paper Folding Unit failed to go

through HP (Document Insertion/Folding Unit-H1)

Detection description

The Upper Stopper HP Sensor failed to be OFF despite the drive of specified pulse in the case that the Upper Stopper Motor started to be driven while the Upper Stopper HP Sensor was ON.

Remedy 1. Connector of the Upper Stopper Motor (M7) is disconnected.

2. Upper Stopper Motor (M7) is faulty. 3. Connector of the Upper Stopper HP Sensor (S16) is disconnected. 4. Upper Stopper HP Sensor (S16) is faulty.

E569-8002 -05 Title Upper Stopper Motor of Paper Folding Unit failed to return to

HP (Document Insertion/Folding Unit-H1)

Detection description

The Upper Stopper HP Sensor failed to be ON despite the drive of specified pulse in the case that the Upper Stopper Motor started to be driven while the Upper Stopper HP Sensor was OFF.

Remedy 1. Connector of the Upper Stopper Motor (M7) is disconnected.

2. Upper Stopper Motor (M7) is faulty. 3. Connector of the Upper Stopper HP Sensor (S16) is disconnected. 4. Upper Stopper HP Sensor (S16) is faulty.

E56A-8001 -05 Title C-fold Stopper Motor of Paper Folding Unit failed to go through HP (Document Insertion/Folding Unit-H1)

Detection description

The C-fold Stopper Motor HP Sensor failed to be OFF despite the drive of specified pulse in the case that the C-fold Stopper Motor started to be driven while the C-fold Stopper Motor HP Sensor was ON.

Remedy 1. Connector of the C-fold Stopper Motor (M8) is disconnected.

2. C-fold Stopper Motor (M8) is faulty.

3. Connector of the C-fold Stopper HP Sensor (S17) is disconnected.

4. C-fold Stopper HP Sensor (S17) is faulty.

E56A -8002 -05 Title C-fold Stopper Motor of Paper Folding Unit failed to return to

HP (Document Insertion/Folding Unit-H1)

Detection description The C-fold Stopper Motor HP Sensor failed to be ON despite

the drive of specified pulse in the case that the C-fold Stopper Motor started to be driven while the C-fold Stopper Motor HP Sensor was OFF.

Remedy 1. Connector of the C-fold Stopper Motor (M8) is disconnected.

2. C-fold Stopper Motor (M8) is faulty.

3. Connector of the C-fold Stopper HP Sensor (S17) is disconnected.

4. C-fold Stopper HP Sensor (S17) is faulty.

E56B-8001 -05 Title C-fold Tray Motor of Paper Folding Unit failed to go through

HP (Document Insertion/Folding Unit-H1)

Detection description The C-fold Tray Motor Sensor failed to be OFF despite the

drive of specified pulse in the case that the C-fold Tray Motor started to be driven while the C-fold Tray Motor Sensor was ON.

Remedy 1. Connector of the C-fold Tray Motor (M6) is disconnected

2. C-fold Tray Motor (M6) is faulty 3. Connector of the C-fold Tray Motor Sensor (S19) is

Disconnected 4. C-fold Tray Motor Sensor (S19) is faulty

E56B-8002 -05 Title Folding Tray Motor of Paper Folding Unit failed to return to HP

(Document Insertion/Folding Unit-H1)

Detection description

The C-fold Tray Motor Sensor failed to be ON despite the drive of specified pulse in the case that the C-fold Tray Motor started to be driven while the C-fold Tray Motor Sensor was OFF.

Remedy 1. Connector of the C-fold Tray Motor (M6) is disconnected.

2. C-fold Tray Motor (M6) is faulty. 3. Connector of the C-fold Tray Motor Sensor (S19) is

disconnected. 4. C-fold Tray Motor Sensor (S19) is faulty.

E584-0002 -05 Title Shutter home position error (Finisher-P1)

Detection description

The stapler does not return to the shutter home position when

the Stack Ejection Motor has been driven for 3 seconds.

Remedy 1. The Shutter Home Position Sensor (PI113) is faulty.

2. The wiring between the Finisher Controller PCB and Stack

Ejection Motor, and between the Finisher Controller PCB and Shutter Clutch is faulty.

3. The shutter mechanism is faulty. 4. The Stack Ejection Motor (M102), Shutter Clutch (CL101), ang Stack Ejection Lower Roller Clutch (CL102) is faulty.

5. The Finisher Controller PCB is faulty.

E584-8001 -05 Title Shutter home position error (Finisher-P1)

Detection description

The stapler does not leave the shutter home position when the Stack Ejection Motor has been driven for 3 seconds.

Remedy 1. The Shutter Home Position Sensor (PI113) is faulty.

2. The wiring between the Finisher Controller PCB and Stack

Ejection Motor, and between the Finisher Controller PCB and Shutter Clutch is faulty.

3. The shutter mechanism is faulty.

4. The Stack Ejection Motor (M102), Shutter Clutch (CL101),

ang Stack Ejection Lower Roller Clutch (CL102) is faulty.

5. The Finisher Controller PCB is faulty.

Thousands of Parts and Free Shipping