Canon ImageRunner Advance 8105 8095 8085,Errorcode E500 To E518

 

E500 -0000 -05 Title Error in IPC communication (Finisher-D1)

Remedy 1. IPC cable is disconnected. 2. IPC cable is faulty.

3. The Finisher Controller PCB is faulty. 4. The host machine Controller PCB is faulty.

Description Communication failed between the host machine and the Finisher.

E503 -0001 -05 Title Error in communication between the Finisher – Saddle Stitcher (Finisher-D1)

Remedy 1. The connector on the wiring between the Finisher Controller PCB and the Saddle Stitcher Controller PCB is disconnected.

2. The wiring between the Finisher Controller PCB and the Saddle Stitcher Controller PCB is faulty.

3. The Finisher Controller PCB is faulty.

4. The Saddle Stitcher Controller PCB is faulty.

Description Communication failed between the Finisher and the Saddle Stitcher

E503 -0002 -05 Title Error in communication between the Finisher – Saddle Stitcher (Finisher-D1)

Remedy 1. The connector on the wiring between the Finisher Controller PCB and the Saddle Stitcher Controller PCB is disconnected.

2. The wiring between the Finisher Controller PCB and the

Saddle Stitcher Controller PCB is faulty.

3. The Finisher Controller PCB is faulty.

4. The Saddle Stitcher Controller PCB is faulty.

Description Communication failed between the Finisher and the Saddle Stitcher

E503 -0021 -05 Title Error in communication between the Finisher - Insertion Unit

(Finisher-D1)

Remedy 1. The connector on the cable between the Finisher and the Insertion Unit is disconnected.

2. The cable between the Finisher and the Insertion Unit is faulty.

3. The Finisher Controller PCB is faulty.

4. The Insertion Unit Controller PCB is faulty.

Description Communication failed between Finisher - Insertion Unit

E503 -0022 -05 Title Error in communication between the Finisher - Insertion Unit

(Finisher-D1/Document Insertion Unit-K1)

Remedy 1. The connector on the cable between the Finisher and the Insertion Unit is disconnected.

2. The cable between the Finisher and the Insertion Unit is faulty.

3. The Finisher Controller PCB is faulty.

4. The Insertion Unit Controller PCB is faulty.

Description Communication failed between Finisher - Insertion Unit

E503 -0041 -05 Title Error in communication between the Finisher – Integration Unit (Finisher-D1)

Remedy 1. The connector on the cable between the Finisher and the Integration Unit is disconnected.

2. The cable between the Finisher and the Integration Unit is faulty.

3. The Finisher Controller PCB is faulty.

4. The Integration Controller PCB is faulty.

Description Communication failed between Finisher - Integration Unit

E503 -0042 -05 Title Error in communication between the Finisher – Integration Unit (Finisher-D1)

Remedy 1. The connector on the cable between the Finisher and the Integration Unit is disconnected.

2. The cable between the Finisher and the Integration Unit is faulty.

3. The Integration Controller PCB is faulty.

4. The Finisher Controller PCB is faulty.

Description Communication failed between Finisher - Integration Unit

E503 -0051 -05 Title Error in communication between the Integration Unit - Professional Puncher (Finisher-D1)

Remedy 1. The connector on the cable between the Integration Unit and the Professional Puncher is disconnected.

2. The cable between the Integration Unit and the Professional Puncher is faulty.

3. The Integration Controller PCB is faulty.

4. The Professional Puncher Controller PCB is faulty.

Description Communication failed between the Integration Unit - Professional Puncher

E503 -0053 -05 Title Error in communication between the Integration Unit -

Professional Puncher (Professional Puncher Integration Unit-B1)

Remedy 1. The connector on the cable between the Integration Unit and the Professional Puncher is disconnected.

2. The cable between the Integration Unit and the Professional Puncher is faulty.

3. The Integration Controller PCB is faulty.

4. The Professional Puncher Controller PCB is faulty.

Description Communication failed between the Integration Unit - Professional Puncher (Error in communication of Professional Puncher)

E503 -0061 -05 Title Error in communication between the Finisher - Paper Folding Unit (Finisher-D1)

Remedy 1. The connector on the cable between the Finisher and the Paper Folding Unit is disconnected.

2. The cable between the Finisher and the Paper Folding Unit is faulty.

3. The Finisher Controller PCB is faulty.

4. The Paper Folding Unit Controller PCB is faulty.

Description Communication failed between the Finisher - Paper Folding Unit

E503 -0062 -05 Title Error in communication between the Finisher - Paper Folding

Unit (Paper Folding Unit-H1/Finisher-D1)

Remedy 1. The connector on the cable between the Finisher and the Paper Folding Unit is disconnected.

2. The cable between the Finisher and the Paper Folding Unit is faulty.

3. The Finisher Controller PCB is faulty.

4. The Paper Folding Unit Controller PCB is faulty.

Description Communication failed between the Finisher - Paper Folding Unit

E503 -0081 -05 Title Error in communication between the Saddle Stitcher -Trimmer (Finisher-D1)

Remedy 1. The connector on the wiring between the Saddle Stitcher and the Trimmer is disconnected.

2. The wiring between the Saddle Stitcher and the Trimmer is faulty.

3. The Trimmer Controller PCB is faulty.

4. The Saddle Stitcher Controller PCB is faulty.

5. The Finisher Controller PCB is faulty.

Description Communication failed between the Finisher – Trimmer

E503 -0082 -05 Title Error in communication between the Saddle Stitcher - Trimmer (Finisher-D1)

Remedy 1. The connector on the wiring between the Saddle Stitcher and the Trimmer is disconnected.

2. The wiring between the Saddle Stitcher and the Trimmer is faulty.

3. The Trimmer Controller PCB is faulty.

4. The Saddle Stitcher Controller PCB is faulty.

5. The Finisher Controller PCB is faulty.

Description Communication failed between the Finisher - Trimmer

E505 -0001 -05 Title Finisher back-up RAM (EEPROM) error (Finisher-D1/E1)

Remedy The Finisher Controller PCB is faulty.

Description The checksum for the EEPROM data has an error. (The value written in EEPROM and the value extracted from EEPROM doesn't conform.)

E505 -0003 -05 Title Insertion unit back-up RAM error (Finisher-D1)

Remedy The Insertion Unit Controller PCB is faulty.

Description The value written in EEPROM and the value extracted from EEPROM doesn't conform.

E505 -0005 -05 Title Paper Folding Unit backup RAM error (Paper Folding Unit-H1/Finisher-D1)

Remedy The Paper Folding Unit Controller PCB is faulty.

Description The value written in EEPROM and the value extracted from EEPROM doesn't conform.

E514 -8001 -05 Title Error in the Gripper Base Motor (Finisher-D1)

Remedy 1. The connector of the Gripper Base Rear Sensor (S117) or the Gripper Base Motor (M116) are disconnected.

2. The wiring of the Gripper Base Rear Sensor (S117) or the Gripper Base Motor (M116) are faulty.

3. The Gripper Base Rear Sensor (S117) is faulty.

4. The Gripper Base Motor (M116) is faulty.

5. The Finisher Controller PCB is faulty.

Description The gripper does not come off the Gripper Base Rear Sensor when the Gripper Base Motor has been driven for 3 seconds.

E514 -8002 -05 Title Error in the Gripper Base Motor (Finisher-D1)

Remedy 1. The connector of the Gripper Base Rear Sensor (S117) or the Gripper Base Motor (M116) are disconnected.

2. The wiring of the Gripper Base Rear Sensor (S117) or the Gripper Base Motor (M116) are faulty.

3. The Gripper Base Rear Sensor (S117) is faulty.

4. The Gripper Base Motor (M116) is faulty.

5. The Finisher Controller PCB is faulty.

Description The Gripper Base Rear Sensor dose not detect the gripper when the Gripper Base Motor has been driven for 3 seconds.

E514 -8003 -05 Title Error in the Gripper Motor (Finisher-D1)

Remedy 1. The connector of the Gripper HP Sensor (S140) or the Gripper Motor (M117) are disconnected.

2. The wiring of the Gripper HP Sensor (S140) or the Gripper Motor (M117) are faulty.

3. The Gripper HP Sensor (S140) is faulty.

4. The Gripper Motor (M117) is faulty.

5. The Finisher Controller PCB is faulty.

Description The gripper does not come off the Gripper HP Sensor when the Gripper Motor has been driven for 3 seconds.

E514 -8004 -05 Title Error in the Gripper Motor (Finisher-D1)

Remedy 1. The connector of the Gripper HP Sensor (S140) or the

Gripper Motor (M117) are disconnected.

2. The wiring of the Gripper HP Sensor (S140) or the Gripper Motor (M117) are faulty.

3. The Gripper HP Sensor (S140) is faulty.

4. The Gripper Motor (M117) is faulty.

5. The Finisher Controller PCB is faulty.

Description The Gripper HP Sensor does not detect the gripper when the

Gripper Motor has been driven for 3 seconds.

E514 -8005 -05 Title Error in the Gripper Motor (Finisher-D1)

Remedy 1. The connector of the Gripper Position Sensor (S115) or the Gripper Motor (M117) are disconnected.

2. The wiring of the Gripper Position Sensor (S115) or the Gripper Motor (M117) are faulty.

3. The Gripper Position Sensor (S115) is faulty.

4. The Gripper Motor (M117) is faulty.

5. The Finisher Controller PCB is faulty.

Description The gripper does not come off the Position Sensor when the

Gripper Motor has been driven for 3 seconds.

E514 -8006 -05 Title Error in the Gripper Motor (Finisher-D1)

Remedy 1. The connector of the Gripper Position Sensor (S115) or the Gripper Motor (M117) are disconnected.

2. The wiring of the Gripper Position Sensor (S115) or the Gripper Motor (M117) are faulty.

3. The Gripper Position Sensor (S115) is faulty.

4. The Gripper Motor (M117) is faulty.

5. The Finisher Controller PCB is faulty.

Description The Gripper Position Sensor does not detect the gripper

when the Gripper Motor has been driven for 3 seconds.

E518 -8001 -05 Title Error in Folding Feed Motor lock (Paper Folding Unit-H1)

Remedy 1. Connector of the Folding Feed Motor (M11) is disconnected.

2. Folding Feed Motor (M11) is faulty.

Description The lock signal turns on for the specified time from the drive start of Folding Feed Motor.