E551 -0001 -05 Title A.Error in Power Supply Cooling Fan (Document Insertion Unit-K1)
B.Error in the Power
Supply Fan of the Finisher (Finisher-D1)
Remedy A-1. Connector of the Power Supply
Cooling Fan (F1) is disconnected
A-2. Power Supply Cooling Fan (F1)
is faulty
B-1. The connector of the Power
Supply Fan (FAN101) is disconnected.
B-2. The wiring of the Power Supply
Fan (FAN101) is faulty.
B-3. The Power Supply Fan (FAN101)
is faulty.
B-4. The Finisher Controller PCB is
faulty.
Description A.The lock detection signal is
detected ON while the PowerSupply Cooling Fan is driven, or the fan lock
detection signal is detected OFF while the Power Supply Cooling Fan is stopped.
B.The loch signal is detected 1.2
sec. or more while the fan operates.
E551 -0002 -05 Title
A.Error in Power Supply Cooling Fan of Paper Folding Unit
(Paper Folding Unit-H1)
B.Error in the Power
Supply Fan of the Finisher (Finisher-D1)
Remedy A-1. Connector of the Power Supply
Cooling Fan (F1) is disconnected
A-2. Power Supply Cooling Fan (F1)
is faulty
B-1. The connector of the Power
Supply Fan (FAN101) is disconnected.
B-2. The wiring of the Power Supply
Fan (FAN101) is faulty.
B-3. The Power Supply Fan (FAN101)
is faulty.
B-4. The Finisher Controller PCB is
faulty.
Description A.The lock detection signal is
detected ON while the Power Supply Cooling Fan is driven, or the fan lock
detection signal is detected OFF while the Power Supply Cooling Fan is stopped.
B.The lock status is released when
the fan stops.
E551 -0011 -05 Title Error
in the Power Supply Fan of the Insertion Unit
Remedy 1. The connector of the Fan (F1) is disconnected.
2. The wiring of the Fan (F1) is
faulty.
3. The Fan (F1) is faulty.
4. The Insertion Unit Controller PCB
is faulty.
Description The loch signal is detected for the specified
times while the
fan operates.
E551 -0021 -05 Title Error
in the Power Supply Fan of the Paper Folding Unit
Remedy 1. The connector of the Fan (F1) is disconnected.
2. The wiring of the Fan (F1) is
faulty.
3. The Fan (F1) is faulty.
4. The Paper Folding Unit Controller
PCB is faulty.
Description The loch signal is detected for the specified
times while the
fan operates.
E562 -8001 -05 Title Error
in Slowing Timing Sensor (Paper Folding Unit-H1)
Remedy 1. Connector of the Slowing Timing
Sensor (S30) is disconnected.
2. Slowing Timing Sensor (S30) is
faulty.
Description The receiving-light intensity
failed to be within the threshold although the emitting-light intensity is
adjusted to be within the threshold when adjusting the Sensor.
E562 -8002 -05 Title Error
in Disengagement Timing Sensor (Paper Folding Unit-H1)
Remedy 1. Connector of the Disengagement Timing Sensor (S31) is
disconnected.
2. Disengagement Timing Sensor (S31)
is faulty.
Description The receiving-light intensity failed
to be within the threshold although the emitting-light intensity is adjusted to
be within the threshold when adjusting the Sensor.
E562 -8003 -05 Title Error
in Folding Position Accuracy Sensor (Paper Folding Unit-H1)
Remedy 1. Connector of the Folding Position Accuracy Sensor
(S32) is disconnected.
2. Folding Position Accuracy Sensor
(S32) is faulty.
Description The receiving-light intensity failed
to be within the threshold although the emitting-light intensity is adjusted to
be within the threshold when adjusting the Sensor.
E562 -8004 -05 Title Error
in the Upper Stopper HP Sensor (Paper Folding Unit-H1)
Remedy 1. Connector of the Upper Stopper HP Sensor (S23) is disconnected.
2. Upper Stopper HP Sensor (S23) is
faulty.
Description The receiving-light intensity
failed to be within the threshold although the emitting-light intensity is
adjusted to be within the threshold when adjusting the Sensor.
E568 -8001 -05 Title Error
in the Feed Roller Disengage/Buffer Flapper Motor (Finisher-D1)
Remedy 1. The connector of the Feed Roller Separation HP Sensor
(S111) or the Feed Roller Disengage/Buffer Flapper Motor (M119) are
disconnected.
2. The wiring of the Feed Roller
Separation HP Sensor (S111) or the Feed Roller Disengage/Buffer Flapper Motor
(M119) are faulty.
3. The Feed Roller Separation HP
Sensor (S111) is faulty.
4. The Feed Roller Disengage/Buffer
Flapper Motor (M119) is faulty.
5. The Finisher Controller PCB is
faulty.
Description The disengage roller does not come
off the Feed Roller Separation HP Sensor when the Feed Roller Disengage/ Buffer
Flapper Motor has been driven for 3 seconds.
E568 -8002 -05 Title Error
in the Feed Roller Disengage/Buffer Flapper Motor (Finisher-D1)
Remedy 1. The connector of the Feed Roller
Separation HP Sensor (S111) or the Feed Roller Disengage/Buffer Flapper Motor (M119)
are disconnected.
2. The wiring of the Feed Roller
Separation HP Sensor (S111) or the Feed Roller Disengage/Buffer Flapper Motor
(M119) are faulty.
3. The Feed Roller Separation HP
Sensor (S111) is faulty.
4. The Feed Roller Disengage/Buffer
Flapper Motor (M119) is faulty.
5. The Finisher Controller PCB is
faulty.
Description The Feed Roller Separation HP
Sensor does not detect the disengage roller when the Feed Roller Disengage/Buffer
Flapper Motor has been driven for 3 seconds.
E568 -8003 -05 Title Error
in the Feed Roller Disengage/Buffer Flapper Motor (Finisher-D1)
Remedy 1. The connector of the Buffer Flapper HP Sensor (S142)
or the Feed Roller Disengage/Buffer Flapper Motor (M119) are disconnected.
2. The wiring of the Buffer Flapper
HP Sensor (S142) or the Feed Roller Disengage/Buffer Flapper Motor (M119) are faulty.
3. The Buffer Flapper HP Sensor
(S142) is faulty.
4. The Feed Roller Disengage/Buffer
Flapper Motor (M119) is faulty.
5. The Finisher Controller PCB is
faulty.
Description The buffer flapper does not come off the Buffer
Flapper HP Sensor when the Feed Roller Disengage/Buffer Flapper Motor has been driven
for 3 seconds.
E568 -8004 -05 Title Error
in the Feed Roller Disengage/Buffer Flapper Motor (Finisher-D1)
Remedy 1. The connector of the Buffer
Flapper HP Sensor (S142) or the Feed Roller Disengage/Buffer Flapper Motor
(M119) are disconnected.
2. The wiring of the Buffer Flapper
HP Sensor (S142) or the Feed Roller Disengage/Buffer Flapper Motor (M119) are faulty.
3. The Buffer Flapper HP Sensor
(S142) is faulty.
4. The Feed Roller Disengage/Buffer
Flapper Motor (M119) is faulty.
5. The Finisher Controller PCB is
faulty.
Description The Buffer Flapper HP Sensor does
not detect the buffer flapper when the Feed Roller Disengage/Buffer Flapper Motor has been driven for 3 seconds.
E569 -8001 -05 Title Upper
Stopper Motor of Paper Folding Unit failed to go
through HP (Paper Folding
Unit-H1)
Remedy 1. Connector of the Upper Stopper Motor (M8) is disconnected.
2. Upper Stopper Motor (M8) is
faulty.
3. Connector of the Upper Stopper HP
Sensor (S23) is disconnected.
4. Upper Stopper HP Sensor (S23) is
faulty.
Description The Upper Stopper HP Sensor failed
to be OFF despite the drive of specified pulse in the case that the Upper Stopper Motor started to be driven while the Upper Stopper HP Sensor was ON.
E569 -8002 -05 Title Upper
Stopper Motor of Paper Folding Unit failed to return to HP (Paper Folding Unit-H1)
Remedy 1. Connector of the Upper Stopper
Motor (M8) is disconnected.
2. Upper Stopper Motor (M8) is
faulty.
3. Connector of the Upper Stopper HP
Sensor (S23) is disconnected.
4. Upper Stopper HP Sensor (S23) is
faulty.
Description The Upper Stopper HP Sensor failed
to be ON despite the drive
of specified pulse in the case that the Upper Stopper Motor
started to be driven while the Upper Stopper HP
Sensor was OFF.
E56A -8001 -05 Title
C-fold Stopper Motor of Paper Folding Unit failed to go
through HP (Paper Folding
Unit-H1)
Remedy 1. Connector of the C-fold Stopper
Motor (M9) is disconnected.
2. C-fold Stopper Motor (M9) is
faulty.
3. Connector of the C-fold Stopper
HP Sensor (S24) is disconnected.
4. C-fold Stopper HP Sensor (S24) is
faulty.
Description The C-fold Stopper Motor HP Sensor
failed to be OFF despite the drive of specified pulse in the case that the C-fold Stopper Motor started to be driven while the C-fold Stopper Motor HP Sensor was
ON.
E56A -8002 -05 Title
C-fold Stopper Motor of Paper Folding Unit failed to return to
HP (Paper Folding Unit-H1)
Remedy 1. Connector of the C-fold Stopper
Motor (M9) is disconnected.
2. C-fold Stopper Motor (M9) is
faulty.
3. Connector of the C-fold Stopper
HP Sensor (S24) is disconnected.
4. C-fold Stopper HP Sensor (S24) is
faulty.
Description The C-fold Stopper Motor HP Sensor
failed to be ON despite the drive of specified pulse in the case that the C-fold Stopper Motor started to be driven while the C-fold Stopper Motor HP
Sensor was OFF.
E56B -8001 -05 Title
Folding Tray Motor of Paper Folding Unit failed to go through
HP (Paper Folding Unit-H1)
Remedy 1. Connector of the Folding Tray Motor (M7) is
disconnected.
2. Folding Tray Motor (M7) is
faulty.
3. Connector of the Folding Tray HP
Sensor (S28) is disconnected.
4. Folding Tray HP Sensor (S28) is
faulty.
Description The Folding Tray HP Sensor failed
to be OFF despite the drive of specified pulse in the case that the Folding Tray Motor started to be driven while the Folding Tray HP Sensor was ON.
E56B -8002 -05 Title
Folding Tray Motor of Paper Folding Unit failed to return to
HP (Paper Folding Unit-H1)
Remedy 1. Connector of the Folding Tray Motor (M7) is
disconnected.
2. Folding Tray Motor (M7) is
faulty.
3. Connector of the Folding Tray HP
Sensor (S28) is disconnected.
4. Folding Tray HP Sensor (S28) is
faulty.
Description The Folding Tray HP Sensor failed to
be ON despite the drive of specified pulse in the case that the Folding Tray Motor started to be driven while the Folding Tray HP Sensor was OFF.
E56D -8001 -05 Title Error
in the Stacking Tray Paper Retainer Motor (Finisher-D1)
Remedy 1. The connector of the Stacking Tray Paper Retainer HP Sensor
(S114) or the Stacking Tray Paper Retainer Motor (M114) are disconnected.
2. The wiring of the Stacking Tray
Paper Retainer HP Sensor (S114) or the Stacking Tray Paper Retainer Motor
(M114) are faulty.
3. The Stacking Tray Paper Retainer
HP Sensor (S114) is faulty.
4. The Stacking Tray Paper Retainer
Motor (M114) is faulty.
5. The Finisher Controller PCB is
faulty.
Description The stacking tray paper retainer
does not come off the Stacking Tray Paper Retainer HP Sensor when the Stacking Tray
Paper Retainer Motor has been driven for 3 seconds.
E56D -8002 -05 Title Error
in the Stacking Tray Paper Retainer Motor (Finisher-D1)
Remedy 1. The connector of the Stacking Tray Paper Retainer HP Sensor
(S114) or the Stacking Tray Paper Retainer Motor (M114) are disconnected.
2. The wiring of the Stacking Tray
Paper Retainer HP Sensor (S114) or the Stacking Tray Paper Retainer Motor
(M114) are faulty.
3. The Stacking Tray Paper Retainer
HP Sensor (S114) is faulty.
4. The Stacking Tray Paper Retainer
Motor (M114) is faulty.
5. The Finisher Controller PCB is
faulty.
Description The Stacking Tray Paper Retainer HP
Sensor does not detect the stacking tray paper retainer when the Stacking Tray Paper
Retainer Motor has been driven for 3 seconds.
E56E -8001 -05 Title
Lead-edge Retaining Guide Motor of Paper Folding Unit
failed to go through HP
(Paper Folding Unit-H1)
Remedy 1. Connector of the Lead-edge
Retaining Guide Motor (M10) is disconnected.
2. Lead-edge Retaining Guide Motor
(M10) is faulty.
3. Connector of the Lead-edge
Retaining Guide HP Sensor (S25) is disconnected.
4. Lead-edge Retaining Guide HP
Sensor (S25) is faulty.
Description The Lead-edge Retaining Guide HP
Sensor failed to be OFF
despite
the drive of specified pulse in the case that the Leadedge
Retaining Guide Motor started to be
driven while the
Lead-edge Retaining Guide HP Sensor was ON.
E56E -8002 -05 Title
Lead-edge Retaining Guide Motor of Paper Folding Unit
failed to return to HP
(Paper Folding Unit-H1)
Remedy 1. Connector of the Lead-edge Retaining Guide Motor
(M10) is disconnected.
2. Lead-edge Retaining Guide Motor
(M10) is faulty.
3. Connector of the Lead-edge
Retaining Guide HP Sensor (S25) is disconnected.
4. Lead-edge Retaining Guide HP
Sensor (S25) is faulty.
Description The Lead-edge Retaining Guide HP
Sensor failed to be ON despite the drive of specified pulse in the case that the Leadedge Retaining Guide Motor started to be driven while the
Lead-edge Retaining Guide HP Sensor was OFF.
No comments:
Post a Comment