Thousands of Parts and Free Shipping
E5E1-0001 -05 Title Tray Lift Motor of Paper Folding Unit failed to go through HP
(Document Insertion Unit-L1)
Detection description
The Paper Feed Sensor (S3) did not turned ON when the
Inserter paper feed tray moved up.
Remedy 1. Connector of the Tray Lift Motor (M2) is
disconnected
2. Tray Lift Motor (M2) is faulty
3. Connector of the Paper Feed Sensor (S3) is disconnected
4. Paper Feed Sensor is faulty
E5E1-0002 -05 Title Tray Lift Motor of Paper Folding Unit
failed to return to HP
(Document Insertion Unit-L1)
Detection description During initialization or
lowering of the Inserter paper feed tray,
the Tray Lower Limit Sensor (S5) has not turned ON within the specified time.
Remedy 1. Connector of the Tray Lift Motor (M2) is
disconnected
2. Tray Lift Motor (M2) is faulty
3. Connector of the Tray Lower Limit Sensor (S5) is disconnected
4. Tray Lower Limit Sensor (S5) is faulty
E5E1-8001 -05 Title Tray Lift Motor of Paper Folding Unit
failed to go through HP
(Document Insertion/Folding Unit-H1)
Detection description The Paper Feed Sensor
(S3) did not turned ON when the
Inserter paper feed tray moved up.
Remedy 1. Connector of the Tray Lift Motor (M2) is
disconnected
2. Tray Lift Motor (M2) is faulty 3. Connector of the Paper Feed Sensor (S3) is
disconnected 4. Paper Feed Sensor (S3) is faulty
E5E1-8002 -05 Title Tray Lift Motor of Paper Folding Unit
failed to return to HP
(Document Insertion/Folding Unit-H1)
Detection description
During initialization or lowering of the Inserter paper feed tray,
the Tray Lower Limit Sensor (S5) has not turned ON within the specified time.
Remedy 1. Connector of the Tray Lift Motor (M2) is
disconnected 2. Tray Lift Motor (M2) is faulty 3. Connector of the Tray Lower Limit Sensor (S5)
is disconnected
4. Tray Lower Limit Sensor (S5) is faulty
E5F0-8001 -05 Title Paper positioning plate home position
error (Finisher-P1)
Detection description
The paper positioning plate home positio Sensor does not turn
ON when the Paper Positioning Plate Motor has been driven for 1500 pulses.
Remedy 1. The Paper Positioning Plate Home Position
Sensor (PI7) is faulty.
2. The positioning plate drive mechanism is faulty.
3. The Paper Positioning Plate Motor (M4) is faulty.
4. The Saddle Stitcher Controller PCB is faulty.
E5F0-8002 -05 Title Paper positioning plate home position
error (Finisher-P1)
Detection description
The Paper Positioning Plate Home Position Sensor does not turn OFF when the Paper Positioning Plate Motor has been driven for 300 pulses.
Remedy 1. The Paper Positioning Plate Home Position
Sensor (PI7) is faulty.
2. The wiring between the Finisher Controller PCB and Stack Ejection Motor, and between the Finisher Controller PCB and Shutter Clutch is faulty.
3. The positioning plate drive mechanism is faulty.
4. The Paper Positioning Plate Motor (M4) is faulty.
5. The Saddle Stitcher Controller PCB is faulty.
E5F1-8001 -05 Title Paper Ffolding Motor lock error
(Finisher-P1)
Detection description
The feed speed of the paper fold roller reaches 5 mm/sec or less.
Remedy 1. The Paper Folding Motor Clock Sensor (PI4) and Paper
Ffolding Home Position Sensor (PI21) is faulty.
2. The paper folding roller drive mechanism is faulty.
3. The Paper Folding Motor (M2) is faulty. 4.
The Saddle Stitcher Controller PCB is faulty.
E5F1-8002 -05 Title Paper positioning plate home position
error (Finisher-P1)
Detection description
The status of the Paper Fold Home Position Sensor does
not change when the paper fold Motor has been driven for 3 seconds.
Remedy 1. The Paper Folding Motor Clock Sensor (PI4)
and Paper
Ffolding Home Position Sensor (PI21) is faulty.
2. The paper folding roller drive mechanism is faulty.
3. The Paper Folding Motor (M2) is faulty. 4.
The Saddle Stitcher Controller PCB is faulty.
E5F2 -8001 -05 Title Guide home position error
(Finisher-P1)
Detection description
The Guide Home Position Sensor does not turn ON when the Guide Motor has been driven for 700 pulses.
Remedy 1. The Guide Home Position Sensor (PI13) is
faulty.
2. The guide plate drive mechanism is faulty. 3.
The Guide Motor (M3) is faulty.
4. The Saddle Stitcher Controller PCB is faulty.
E5F2-8002 -05 Title Guide home position error
(Finisher-P1)
Detection description The Guide Home Position
Sensor does not turn OFF when the Guide Motor has been
driven for 50 pulses.
Remedy 1. The Guide Home Position Sensor (PI13) is
faulty. 2. The guide plate drive mechanism is faulty. 3. The Guide Motor (M3) is faulty.
4. The Saddle Stitcher Controller PCB is faulty.
E5F3-8001 -05 Title Aligning plate home position error
(Finisher-P1)
Detection description The Aligning Plate Home
Position Sensor does not turn ON
when the Aligning Motor has been driven for 500 pulses.
Remedy 1. The Aligning Plate Home Position Sensor (PI5)
is faulty.
2. The aligning plate drive mechanism is faulty. 3.
The Aligning Motor (M5) is faulty.
4. The Saddle Stitcher Controller PCB is faulty.
E5F3-8002 -05 Title Aligning plate home position error
(Finisher-P1)
Detection description The Aligning Plate Home
Position Sensor does not turn OFF
when the Aligning Motor has been driven for 50 pulses.
Remedy 1. The Aligning Plate Home Position Sensor (PI5)
is faulty.
2. The aligning plate drive mechanism is faulty. 3.
The Aligning Motor (M5) is faulty.
4. The Saddle Stitcher Controller PCB is faulty.
E5F4-8001 -05 Title Stitcher (rear) home position error
(Finisher-P1)
Detection description The Stitcher Home
Position Sensor does not turn ON when
the Stitch Motor (rear) has been driven backward for 0.5 sec.
Remedy 1. The Stitcher Home Position Sensor (rear) (SW5)
is faulty.
2. The Stitcher (rear) is faulty. 3. The Saddle Stitcher
Controller PCB is faulty.
E5F4-8002 -05 Title Stitcher (rear) home position error
(Finisher-P1)
Detection description The stitching home
position Sensor does not turn OFF when
the Stitch Motor (rear) has been driven forward for 0.5 sec.
Remedy 1. The Stitcher Home Position Sensor (rear)
(SW5) is faulty.
2. The Stitcher (rear) is faulty. 3. The Saddle Stitcher Controller
PCB is faulty.
E5F5 -8001 -05 Title Stitcher (front) home position error
(Finisher-P1)
Detection description The Stitcher Home
Position Sensor does not turn ON when
the Stitch Motor (front) has been driven forward for 0.5 sec.
Remedy 1. The Stitcher Home Position Sensor (front)
(SW7) is faulty.
2. The Stitcher (front) is faulty. 3.
The Saddle Stitcher Controller PCB is faulty.
E5F5-8002 -05 Title Stitcher (front) home position error
(Finisher-P1)
Detection description The Stitcher Home
Position Sensor does not turn OFF when
the Stitch Motor (front) has been driven backward for 0.5 sec.
Remedy 1. The Stitcher Home Position Sensor (front)
(SW7) is faulty.
2. The Stitcher (front) is faulty. 3.
The Saddle Stitcher Controller PCB is faulty.
E5F6-8001 -05 Title Paper pushing plate home position
error (Finisher-P1)
Detection description The Paper Pushing Plate
Home Position Sensor does not turn
ON when the Paper Pushing Plate Motor has been driven for 0.5 sec.
Remedy 1. The Paper Pushing Plate Home Position Sensor
(PI14), Paper Pushing Plate Top Position Sensor (PI15),
and Paper Pushing Plate Motor Clock Sensor (PI1) is faulty.
2. The paper pushing plate drive mechanism is faulty. 3. The Paper Pushing
Plate Motor (M8) is faulty. 4. The Saddle Stitcher
Controller PCB is faulty.
E5F6-8002 -05 Title Paper pushing plate home position
error (Finisher-P1)
Detection description The Paper Pushing Plate Home Position Sensor does not
turn
OFF when the Paper Pushing Plate Motor has been driven for 150 msec.
Remedy 1. The Paper Pushing Plate Home Position Sensor (PI14),
Paper Pushing Plate Top Position Sensor (PI15), and Paper
Pushing Plate Motor Clock Sensor (PI1) is faulty.
2. The paper pushing plate drive mechanism is faulty.
3. The Paper Pushing Plate Motor (M8) is faulty.
4. The Saddle Stitcher Controller PCB is faulty
E5F6-8003 -05 Title Paper Pushing Plate Motor clock error
(Finisher-P1)
Detection description The number of pulses
detected by the Paper Pushing Plate
Motor Clock Sensor is 6 pulses or less.
Remedy 1. The Paper Pushing Plate Home Position Sensor
(PI14),
Paper Pushing Plate Top Position Sensor (PI15), and Paper
Pushing Plate Motor Clock Sensor (PI1) is faulty.
2. The paper pushing plate drive mechanism is faulty.
3. The Paper Pushing Plate Motor (M8) is faulty.
4. The Saddle Stitcher Controller PCB is faulty.
E5F6-8004 -05 Title Pushing position error (Finisher-P1)
Detection description The Paper Pushing Plate
Leading Edge Position Sensor does
not turn ON when the Paper Pushing Plate Motor has been driven for 0.1 sec.
Remedy 1. The Paper Pushing Plate Home Position Sensor
(PI14),
Paper Pushing Plate Top Position Sensor (PI15), and Paper
Pushing Plate Motor Clock Sensor (PI1) is faulty.
2. The paper pushing plate drive mechanism is faulty.
3. The Paper Pushing Plate Motor (M8) is faulty.
4. The Saddle Stitcher Controller PCB is faulty.
E5F6-8005 -05 Title Pushing position error (Finisher-P1)
Detection description The Paper Pushing Plate
Leading Edge Position Sensor does
not turn OFF when the Paper Pushing Plate Motor has been driven for 0.5 sec.
Remedy 1. The Paper Pushing Plate Home Position Sensor
(PI14),
Paper Pushing Plate Top Position Sensor (PI15), and Paper
Pushing Plate Motor Clock Sensor (PI1) is faulty.
2. The paper pushing plate drive mechanism is faulty.
3. The Paper Pushing Plate Motor (M8) is faulty.
4. The Saddle Stitcher Controller PCB is faulty.Thousands of Parts and Free Shipping
No comments:
Post a Comment