Canon ImageRunner Advance 8205 8295 8285,Errorcode E577 To E584 and Solution

E577 -8001 -05 Title Error in paddle rotation/up&down operation

Detection description Paddle rotation HP sensor does not come ON within 5 sec

after the paddle rotation motor starts operation.

Remedy 1. Replacement of paddle rotation motor and paddle rotation HP sensor

2. Replacement of finisher controller PCB

E577 -8002 -05 Title Error in paddle rotation/up&down operation

Detection description Paddle rotation HP sensor does not go OFF within 5 sec after

the paddle rotation motor starts operation.

Remedy 1. Replacement of paddle rotation motor and paddle rotation HP sensor

2. Replacement of finisher controller PCB

E577 -8003 -05 Title Error in paddle rotation/up&down operation

Detection description Paddle up/down HP sensor does not come ON within 5 sec

after the paddle up/down motor starts operation.

Remedy 1. Connector check of paddle up/down motor and paddle up/ down HP sensor

2. Replacement of paddle up/down motor and paddle up/down HP sensor

3. Replacement of finisher controller PCB

E577 -8004 -05 Title Error in paddle rotation/up&down operation

Detection description Paddle up/down HP sensor does not go OFF within 5 sec after

the paddle up/down motor starts operation.

Remedy 1. Connector check of paddle up/down motor and paddle up/ down HP sensor

2. Replacement of paddle up/down motor and paddle up/down HP sensor

3. Replacement of finisher controller PCB

E578 -8001 -05 Title a. Error in feed belt operation (Finisher-Q1)

b. Error in the Paper Return Guide Motor (Finisher-N1)

Detection description

a. Feed belt HP sensor does not come ON within 5 sec after the feed belt shift motor starts operation.

b. The paper return guide does not come off the Paper Return Guide HP Sensor when the Paper Return Guide Motor has been driven for 3 seconds.

Remedy a-1. Connector check of feed belt shift motor and feed belt HP sensor

a-2. Replacement of feed belt shift motor and feed belt HP sensor

a-3. Replacement of finisher controller PCB

b-1. The connector of the Paper Return Guide HP Sensor (S112) or the Paper Return Guide Motor (M112) are disconnected.

b-2. The wiring of the Paper Return Guide HP Sensor (S112) or the Paper Return Guide Motor (M112) are faulty.

b-3. The Paper Return Guide HP Sensor (S112) is faulty.

b-4. The Paper Return Guide Motor (M112) is faulty.

b-5. The Finisher Controller PCB is faulty.

E578 -8002 -05 Title a. Error in feed belt operation (Finisher-Q1)

b. Error in the Paper Return Guide Motor (Finisher-N1)

Detection description

a. Feed belt HP sensor does not go OFF within 5 sec after the feed belt shift motor starts operation.

b. The Paper Return Guide HP Sensor does not detect the paper return guide when the Paper Return Guide Motor has been driven for 3 seconds.

Remedy a-1. Connector check of feed belt shift motor and feed belt HP sensor

a-2. Replacement of feed belt shift motor and feed belt HP sensor

a-3. Replacement of finisher controller PCB

b-1. The connector of the Paper Return Guide HP Sensor (S112) or the Paper Return Guide Motor (M112) are disconnected.

b-2. The wiring of the Paper Return Guide HP Sensor (S112) or the Paper Return Guide Motor (M112) are faulty.

b-3. The Paper Return Guide HP Sensor (S112) is faulty.

b-4. The Paper Return Guide Motor (M112) is faulty.

b-5. The Finisher Controller PCB is faulty.

E57A -8001 -05 Title Error in process stopper operation

Detection description Process tray HP sensor does not come ON within 5 sec after

the process stopper shift motor starts operation.

Remedy 1. Connector check of process stopper shift motor and process tray HP sensor

2. Replacement of process stopper shift motor and process tray HP sensor

3. Replacement of finisher controller PCB

E57A -8002 -05 Title Error in process stopper operation

Detection description Process tray HP sensor does not go OFF within 5 sec after the

process stopper shift motor starts operation.

Remedy 1. Connector check of process stopper shift motor and process tray HP sensor

2. Replacement of process stopper shift motor and process tray HP sensor

3. Replacement of finisher controller PCB

E57A -8003 -05 Title Error in process stopper operation

Detection description When the process stopper starts operation, the stapler

interferes and operation cannot proceed.

Remedy 1. Connector check of process stopper shift motor

2. Replacement of process stopper shift motor

3. Replacement of finisher controller PCB

E57B -8001 -05 Title a. Error in paper rear edge drop operation (Finisher-Q1)

b. Error in the Paper Trailing Edge Pushing Guide Motor (Finisher-N1)

Detection description

a. Paper rear edge drop guide HP sensor does not come ON within 5 sec after the paper rear edge drop motor starts operation.

b. The paper trailing edge pushing guide does not come off the Paper Trailing Edge Pushing Guide HP Sensor when the Paper Trailing Edge Pushing Guide Motor has been driven for 3 seconds.

Remedy a-1. Connector check of paper rear edge drop motor and paper rear edge drop guide HP sensor

a-2. Replacement of paper rear edge drop motor and paper rear edge drop guide HP sensor

a-3. Replacement of finisher controller PCB

b-1. The connector of the Paper Trailing Edge Pushing Guide HP Sensor (S113) or the Paper Trailing Edge Pushing Guide Motor (M113) are disconnected.

b-2. The wiring of the Paper Trailing Edge Pushing Guide HP Sensor (S113) or the Paper Trailing Edge Pushing Guide Motor (M113) are faulty.

b-3. The Paper Trailing Edge Pushing Guide HP Sensor (S113) is faulty.

b-4. The Paper Trailing Edge Pushing Guide Motor (M113) is faulty.

b-5. The Finisher Controller PCB is faulty.

E57B -8002 -05 Title a. Error in paper rear edge drop operation (Finisher-Q1)

b. Error in the Paper Trailing Edge Pushing Guide Motor (Finisher-N1)

Detection description a. Paper rear edge drop guide HP sensor does not go off

within 5 sec after the paper rear edge drop motor starts operation.

b. The Paper Trailing Edge Pushing Guide HP Sensor does not detect the paper trailing edge pushing guide when the Paper Trailing Edge Pushing Guide Motor has been driven for 3 seconds.

Remedy a-1. Connector check of paper rear edge drop motor and paper rear edge drop guide HP sensor

a-2. Replacement of paper rear edge drop motor and paper rear edge drop guide HP sensor

a-3. Replacement of finisher controller PCB

b-1. The connector of the Paper Trailing Edge Pushing Guide HP Sensor (S113) or the Paper Trailing Edge Pushing Guide Motor (M113) are disconnected.

b-2. The wiring of the Paper Trailing Edge Pushing Guide HP Sensor (S113) or the Paper Trailing Edge Pushing Guide Motor (M113) are faulty.

b-3. The Paper Trailing Edge Pushing Guide HP Sensor (S113) is faulty.

b-4. The Paper Trailing Edge Pushing Guide Motor (M113) is faulty.

b-5. The Finisher Controller PCB is faulty.

E57C -8001 -05 Title a. Error in upper guide operation (Finisher-Q1)

b. Error in the Processing Tray Paper Retainer Motor (Finisher-N1)

Detection description

a. Upper guide HP sensor does not come ON within 5 sec after the upper guide motor starts operation.

b. The paper retainer does not come off the Paper Retainer HP Sensor when the Processing Tray Paper Retainer Motor has been driven for 3 seconds.

Remedy a-1. Connector check of upper guide motor and upper guide HP sensor

a-2. Replacement of upper guide motor and upper guide HP sensor

a-3. Replacement of finisher controller PCB

b-1. The connector of the Paper Retainer HP Sensor (S135) or the Processing Tray Paper Retainer Motor (M118) are disconnected.

b-2. The wiring of the Paper Retainer HP Sensor (S135) or the Processing Tray Paper Retainer Motor (M118) are faulty.

b-3. The Paper Retainer HP Sensor (S135) is faulty.

b-4. The Processing Tray Paper Retainer Motor (M118) is faulty.

b-5. The Finisher Controller PCB is faulty.

E57C -8002 -05 Title a. Error in upper guide operation (Finisher-Q1)

b. Error in the Processing Tray Paper Retainer Motor (Finisher-N1)

Detection description

a. Upper guide HP sensor does not go OFF within 5 sec after the upper guide motor starts operation.

b. The Paper Retainer HP Sensor does not detect the paper retainer when the Processing Tray Paper Retainer Motor has been driven for 3 seconds.

Remedy a-1. Connector check of upper guide motor and upper guide HP sensor

a-2. Replacement of upper guide motor and upper guide HP sensor

a-3. Replacement of finisher controller PCB

b-1. The connector of the Paper Retainer HP Sensor (S135) or the Processing Tray Paper Retainer Motor (M118) are disconnected.

b-2. The wiring of the Paper Retainer HP Sensor (S135) or the Processing Tray Paper Retainer Motor (M118) are faulty.

b-3. The Paper Retainer HP Sensor (S135) is faulty.

b-4. The Processing Tray Paper Retainer Motor (M118) is faulty.

b-5. The Finisher Controller PCB is faulty.

E583 -8001 -05 Title a. Error in stack delivery auxiliary tray operation (Finisher-Q1)

b. Error in the Tray Auxiliary Guide Motor (Finisher-N1)

Detection description a. Stack delivery auxiliary tray HP sensor does not come ON

within 5 sec after the stack delivery auxiliary tray motor starts operation.

b. The tray auxiliary guide does not come off the Tray Auxiliary Guide Front/Rear HP Sensors when the Tray Auxiliary Guide Motor has been driven for 3 seconds.

Remedy a-1. Connector check of stack delivery auxiliary tray motor and stack delivery auxiliary tray HP sensor

a-2. Replacement of stack delivery auxiliary tray motor and stack delivery auxiliary tray HP sensor

a-3. Replacement of finisher controller PCB

b-1. The connector of the Tray Auxiliary Guide Front HP Sensor (S137) or the Tray Auxiliary Guide Rear HP Sensor (S136) are disconnected.

b-2. The connector of the Tray Auxiliary Guide Motor (M120) is disconnected.

b-3. The wiring of the Tray Auxiliary Guide Front HP Sensor (S137) or the Tray Auxiliary Guide Rear HP Sensor (S136) are faulty.

b-4. The wiring of the Tray Auxiliary Guide Motor (M120) is faulty.

b-5. The Tray Auxiliary Guide Front HP Sensor (S137) is faulty.

b-6. The Tray Auxiliary Guide Rear HP Sensor (S136) is faulty.

b-7. The Tray Auxiliary Guide Motor (M120) is faulty.

b-8. The Finisher Controller PCB is faulty.

E583 -8002 -05 Title a. Error in stack delivery auxiliary tray operation (Finisher-Q1)

b. Error in the Tray Auxiliary Guide Motor (Finisher-N1)

Detection description

a. Stack delivery auxiliary tray HP sensor does not go OFF within 5 sec after the stack delivery auxiliary tray motor starts operation.

b. The Tray Auxiliary Guide Front/Rear HP Sensors does nor detect the tray auxiliary guide when the Tray Auxiliary Guide Motor has been driven for 3 seconds.

Remedy

a-1. Connector check of stack delivery auxiliary tray motor and stack delivery auxiliary tray HP sensor

a-2. Replacement of stack delivery auxiliary tray motor and stack delivery auxiliary tray HP sensor

a-3. Replacement of finisher controller PCB

b-1. The connector of the Tray Auxiliary Guide Front HP Sensor (S137) or the Tray Auxiliary Guide Rear HP Sensor (S136) are disconnected.

b-2. The connector of the Tray Auxiliary Guide Motor (M120) is disconnected.

b-3. The wiring of the Tray Auxiliary Guide Front HP Sensor (S137) or the Tray Auxiliary Guide Rear HP Sensor (S136) are faulty.

b-4. The wiring of the Tray Auxiliary Guide Motor (M120) is faulty.

b-5. The Tray Auxiliary Guide Front HP Sensor (S137) is faulty.

b-6. The Tray Auxiliary Guide Rear HP Sensor (S136) is faulty.

b-7. The Tray Auxiliary Guide Motor (M120) is faulty.

b-8. The Finisher Controller PCB is faulty.

E584 -0002 -05 Title Error in the Stack Delivery Lower/Shutter Motor (Finisher-N1)

Detection description The Shutter HP Sensor does not detect the shutter when the

Stack Delivery Lower/Shutter Motor has been driven for 3 seconds.

Remedy 1. The connector of the Shutter HP Sensor (S106) or the Stack

Delivery Lower/Shutter Motor (M122) are disconnected.

2. The wiring of the Shutter HP Sensor (S106) or the Stack

Delivery Lower/Shutter Motor (M122) are faulty.

3. The Shutter HP Sensor (S106) is faulty.

4. The Stack Delivery Lower/Shutter Motor (M122) is faulty.

5. The Finisher Controller PCB is faulty.

E584 -8001 -05 Title a. Error in shutter (Finisher-Q1)

b. Error in the Stack Delivery Lower/Shutter Motor (Finisher-N1)

Detection description a. Shutter HP sensor does not come ON within 5 sec after the

paddle rotation motor starts operation.

b. The shutter does not come off the Shutter HP Sensor when

the Stack Delivery Lower/Shutter Motor has been driven for 3 seconds.

Remedy

a-1. Connector check of paddle rotation motor and shutter HP sensor

a-2. Replacement of paddle rotation motor and shutter HP sensor

a-3. Replacement of finisher controller PCB

b-1. The connector of the Shutter HP Sensor (S106) or the Stack Delivery Lower/Shutter Motor (M122) are disconnected.

b-2. The wiring of the Shutter HP Sensor (S106) or the Stack Delivery Lower/Shutter Motor (M122) are faulty.

b-3. The Shutter HP Sensor (S106) is faulty.

b-4. The Stack Delivery Lower/Shutter Motor (M122) is faulty.

b-5. The Finisher Controller PCB is faulty.

E584 -8002 -05 Title a. Error in shutter (Finisher-Q1)

b. Error in the stack delivery lower/shutter motor (Finisher-N1)

Detection description

a. Shutter HP sensor does not go OFF within 5 sec after the paddle rotation motor starts operation.

b. The shutter HP sensor does not detect the shutter.

Remedy a-1. Connector check of paddle rotation motor and shutter HP sensor

a-2. Replacement of paddle rotation motor and shutter HP sensor

a-3. Replacement of finisher controller PCB

b-1. Connector of the shutter HP sensor (S106) is disconnected.

b-2. The shutter HP sensor (S106) is faulty.

b-3. The stack delivery lower/shutter motor (M122) is faulty.

b-4. The finisher controller PCB is faulty.

E584 -8003 -05 Title Error in the Stack Delivery Lower/Shutter Motor (Finisher-N1)

Detection description

The shutter does not come off the Shutter Close Detection Sensor when the Stack Delivery Lower/Shutter Motor has been driven for 3 seconds.

Remedy 1. The connector of the Shutter Close Detection Sensor (S148) or the Stack Delivery Lower/Shutter Motor (M122) are disconnected.

2. The wiring of the Shutter Close Detection Sensor (S148) or the Stack Delivery Lower/Shutter Motor (M122) are faulty.

3. The Shutter Close Detection Sensor (S148) is faulty.

4. The Stack Delivery Lower/Shutter Motor (M122) is faulty.

5. The Finisher Controller PCB is faulty.

E584 -8004 -05 Title Error in the Stack Delivery Lower/Shutter Motor (Finisher-N1)

Detection description The Shutter Close Detection Sensor does not detect the

shutter when the Stack Delivery Lower/Shutter Motor has been

driven for 3 seconds.

Remedy 1. The connector of the Shutter Close Detection Sensor (S148) or the Stack Delivery Lower/Shutter Motor (M122) are disconnected.

2. The wiring of the Shutter Close Detection Sensor (S148) or

the Stack Delivery Lower/Shutter Motor (M122) are faulty.

3. The Shutter Close Detection Sensor (S148) is faulty.

4. The Stack Delivery Lower/Shutter Motor (M122) is faulty.

5. The Finisher Controller PCB is faulty.