Canon ImageRunner Advance 8105 8095 8085,Errorcode E590 To E5EF9 and Solution

 

E590 -8001 -05 Title Error in the Punch Motor (Finisher-D1)

Remedy 1. The connector of the Punch HP Sensor (S104) or the

Punch Motor Clock Sensor (S105) are disconnected.

2. The connector of the Punch Motor (M102) is disconnected.

3. The wiring of the Punch HP Sensor (S104) or the Punch

Motor Clock Sensor (S105) are faulty.

4. The wiring of the Punch Motor (M102) is faulty.

5. The Punch HP Sensor (S104) is faulty.

6. The Punch Motor Clock Sensor (S105) is faulty.

7. The Punch Motor (M102) is faulty.

8. The Puncher Driver PCB (PCB1) is faulty.

9. The Finisher Controller PCB is faulty.

Description 1. During initialization, the Punch HP Sensor does not detect the Puncher when the Punch Motor has been driven for 500msec. after the Puncher has come off the Punch HP Sensor.

2. After initialization, the Punch Motor does not return to home position.

E590 -8002 -05 Title Error in the Punch Motor (Finisher-D1)

Remedy 1. The connector of the Punch HP Sensor (S104) or the

Punch Motor Clock Sensor (S105) are disconnected.

2. The connector of the Punch Motor (M102) is disconnected.

3. The wiring of the Punch HP Sensor (S104) or the Punch

Motor Clock Sensor (S105) are faulty.

4. The wiring of the Punch Motor (M102) is faulty.

5. The Punch HP Sensor (S104) is faulty.

6. The Punch Motor Clock Sensor (S105) is faulty.

7. The Punch Motor (M102) is faulty.

8. The Puncher Driver PCB (PCB1) is faulty.

9. The Finisher Controller PCB is faulty.

Description 1. The Puncher does not come off the Punch HP Sensor

when the Punch Motor has been driven for 200msec.

2. The Puncher does not come off the Punch HP Sensor during initialization.

E590 -8003 -05 Title Punch Motor clock error (Finisher-D1)

Remedy 1. The connector of the Punch HP Sensor (S104) or the

Punch Motor Clock Sensor (S105) are disconnected.

2. The connector of the Punch Motor (M102) is disconnected.

3. The wiring of the Punch HP Sensor (S104) or the Punch

Motor Clock Sensor (S105) are faulty.

4. The wiring of the Punch Motor (M102) is faulty.

5. The Punch HP Sensor (S104) is faulty.

6. The Punch Motor Clock Sensor (S105) is faulty.

7. The Punch Motor (M102) is faulty.

8. The Puncher Driver PCB (PCB1) is faulty.

9. The Finisher Controller PCB is faulty.

Description The drive pulse of the Punch Motor does not reach 100 pulses when the Punch Motor has been driven for 100 msec. after the Puncher has come off the Punch HP Sensor.

E593 -8001 -05 Title Error in the Punch Slide Motor (Finisher-D1)

Remedy 1. The connector of the Horizontal Registration HP Sensor (S101) or the Punch Slide Motor (M101) are disconnected.

2. The wiring of the Horizontal Registration HP Sensor (S101)

or the Punch Slide Motor (M101) are faulty.

3. The Horizontal Registration HP Sensor (S101) is faulty.

4. The Punch Slide Motor (M101) is faulty.

5. The Puncher Driver PCB (PCB1) is faulty.

6. The Finisher Controller PCB is faulty.

Description The punch unit does not come off the Horizontal Registration HP Sensor when the Punch Slide Motor has been driven for 680 msec

E593 -8002 -05 Title Error in the Punch Slide Motor (Finisher-D1)

Remedy 1. The connector of the Horizontal Registration HP Sensor (S101) or the Punch Slide Motor (M101) are disconnected.

2. The wiring of the Horizontal Registration HP Sensor (S101)

or the Punch Slide Motor (M101) are faulty.

3. The Horizontal Registration HP Sensor (S101) is faulty.

4. The Punch Slide Motor (M101) is faulty.

5. The Puncher Driver PCB (PCB1) is faulty.

6. The Finisher Controller PCB is faulty.

Description The Horizontal Registration HP Sensor does not detect the punch unit when the Punch Slide Motor has been driven for 3.3 seconds.

E5A3 -0001 -05 Title Error in the Registration Motor (Finisher-D1)

Remedy 1. The connector of the Registration HP Sensor (S105) or the

Registration Motor (M102) are disconnected.

2. The wiring of the Registration HP Sensor (S105) or the

Registration Motor (M102) are faulty.

3. The Registration HP Sensor (S105) is faulty.

4. The Registration Motor (M102) is faulty.

5. The Trimmer Controller PCB (PCB1) is faulty.

Description The Registration HP Sensor does not turn ON when the

Registration Motor has been driven for 2.933 seconds.

E5A3 -0002 -05 Title Error in the Registration Motor (Finisher-D1)

Remedy 1. The connector of the Registration HP Sensor (S105) or the

Registration Motor (M102) are disconnected.

2. The wiring of the Registration HP Sensor (S105) or the

Registration Motor (M102) are faulty.

3. The Registration HP Sensor (S105) is faulty.

4. The Registration Motor (M102) is faulty.

5. The Trimmer Controller PCB (PCB1) is faulty.

Description The Registration HP Sensor does not turn OFF when the

Registration Motor has been driven for 670 msec.

E5A4 -8001 -05 Title Error in the Press Motor (Finisher-D1)

Remedy 1. The connector of the Press Motor HP Sensor (S106) or the

Press Motor (M105) are disconnected.

2. The wiring of the Press Motor HP Sensor (S106) or the

Press Motor (M105) are faulty.

3. The Press Motor HP Sensor (S106) is faulty.

4. The Press Motor (M105) is faulty.

5. The Trimmer Controller PCB (PCB1) is faulty.

Description The Press Motor HP Sensor does not turn ON when the

Press Motor has been driven for 926 msec.

E5A4 -8002 -05 Title Error in the Press Motor (Finisher-D1)

Remedy 1. The connector of the Press Motor HP Sensor (S106) or the Press Motor (M105) are disconnected.

2. The wiring of the Press Motor HP Sensor (S106) or the Press Motor (M105) are faulty.

3. The Press Motor HP Sensor (S106) is faulty.

4. The Press Motor (M105) is faulty.

5. The Trimmer Controller PCB (PCB1) is faulty.

Description The Press Motor HP Sensor does not turn OFF when the Press Motor has been driven for 601 msec.

E5AA -8001 -05 Title Error in the Cutter Motor (Finisher-D1)

Remedy 1. The connector of the Cutter Motor Clock Sensor (S108) or

the Cutter Motor (M106) are disconnected.

2. The wiring of the Cutter Motor Clock Sensor (S108) or the Cutter Motor (M106) are faulty.

3. The Cutter Motor Clock Sensor (S108) is faulty.

4. The Cutter Motor (M106) is faulty.

5. The Trimmer Controller PCB (PCB1) is faulty.

Description The home position of the trimming blade is not detected when

the Cutter Motor has been driven for 5 seconds.

E5AA -8002 -05 Title Error in the Cutter Motor (Finisher-D1)

Remedy 1. The connector of the Cutter Motor Clock Sensor (S108) or

the Cutter Motor (M106) are disconnected.

2. The wiring of the Cutter Motor Clock Sensor (S108) or the Cutter Motor (M106) are faulty.

3. The Cutter Motor Clock Sensor (S108) is faulty.

4. The Cutter Motor (M106) is faulty.

5. The Trimmer Controller PCB (PCB1) is faulty.

Description The Cutter Motor Clock Sensor does not come off the home position of the trimming blade when the Cutter Motor has been driven for 500 msec.

E5AA -8003 -05 Title Cutter Motor clock error (Finisher-D1)

Remedy 1. The connector of the Cutter Motor Clock Sensor (S108) or

the Cutter Motor (M106) are disconnected.

2. The wiring of the Cutter Motor Clock Sensor (S108) or the Cutter Motor (M106) are faulty.

3. The Cutter Motor Clock Sensor (S108) is faulty.

4. The Cutter Motor (M106) is faulty.

5. The Trimmer Controller PCB (PCB1) is faulty.

Description The Cutter Motor Clock Sensor does not detect the Motor clock when the Cutter Motor has been driven for 625 msec.

E5AE -8000 -05 Title Trimmer stationary paper error

Remedy 1. The paper has jammed in the Trimmer.

2. The connector of the Inlet Sensor (S101) is disconnected.

3. The wire of the Inlet Sensor (S101) is faulty.

4. The Inlet Sensor (S101) is faulty.

5. The Trimmer Controller PCB (PCB1) is faulty.

Description The Inlet Sensor detects the stationary paper after performing

the paper delivery operation.

E5BA -8001 -05 Title Error in the Front Estrangement Motor (Finisher-D1)

Remedy 1. The connector of the Front Estrangement Motor HP Sensor (S102) or the Front Estrangement Motor (M103) are disconnected.

2. The wiring of the Front Estrangement Motor HP Sensor

(S102) or the Front Estrangement Motor (M103) are faulty.

3. The Front Estrangement Motor HP Sensor (S102) is faulty.

4. The Front Estrangement Motor (M103) is faulty.

5. The Trimmer Controller PCB (PCB1) is faulty.

Description The Front Estrangement Motor HP Sensor does not turn

ON when the Front Estrangement Motor has been driven for 191msec.

E5BA -8002 -05 Title Error in the Front Estrangement Motor (Finisher-D1)

Remedy 1. The connector of the Front Estrangement Motor HP Sensor

(S102) or the Front Estrangement Motor (M103) are disconnected.

2. The wiring of the Front Estrangement Motor HP Sensor

(S102) or the Front Estrangement Motor (M103) are faulty.

3. The Front Estrangement Motor HP Sensor (S102) is faulty.

4. The Front Estrangement Motor (M103) is faulty.

5. The Trimmer Controller PCB (PCB1) is faulty.

Description The Front Estrangement Motor HP Sensor does not turn OFF when the Front Estrangement Motor has been driven for 724 msec. after the Front Estrangement Motor HP Sensor has turned ON.

E5BA -8011 -05 Title Error in the Rear Estrangement Motor (Finisher-D1)

Remedy 1. The connector of the Rear Estrangement Motor HP Sensor (S104) or the Rear Estrangement Motor (M104) are disconnected.

2. The wiring of the Rear Estrangement Motor HP Sensor (S104) or the Rear Estrangement Motor (M104) are faulty.

3. The Rear Estrangement Motor HP Sensor (S104) is faulty.

4. The Rear Estrangement Motor (M104) is faulty.

5. The Trimmer Controller PCB (PCB1) is faulty.

Description The Rear Estrangement Motor HP Sensor does not turn ON

when the Rear Estrangement Motor has been driven for 180 msec

E5BA -8012 -05 Title Error in the Rear Estrangement Motor (Finisher-D1)

Remedy 1. The connector of the Rear Estrangement Motor HP Sensor (S104) or the Rear Estrangement Motor (M104) are disconnected.

2. The wiring of the Rear Estrangement Motor HP Sensor

(S104) or the Rear Estrangement Motor (M104) are faulty.

3. The Rear Estrangement Motor HP Sensor (S104) is faulty.

4. The Rear Estrangement Motor (M104) is faulty.

5. The Trimmer Controller PCB (PCB1) is faulty.

Description The Rear Estrangement Motor HP Sensor does not turn OFF when the Rear Estrangement Motor has been driven for 537 msec.

E5BB -8001 -05 Title Error in the Waste Paper Full Sensor (Finisher-D1)

Remedy 1. The connector of the Waste Paper Full Sensor (emitting/ receiving) (S011) is disconnected.

2. The wire of the Waste Paper Full Sensor (emitting/ receiving) (S011) is faulty.

3. The Waste Paper Full Sensor (emitting/receiving) (S011) is faulty.

4. The Trimmer Controller PCB (PCB1) is faulty.

Description The A/D input value does not enter into the D/A output upper limit of the Waste Paper Full Sensor.

E5BB -8002 -05 Title Error in the Waste Paper Full Sensor (Finisher-D1)

Remedy 1. The connector of the Waste Paper Full Sensor (emitting/ receiving) (S011) is disconnected.

2. The wire of the Waste Paper Full Sensor (emitting/ receiving) (S011) is faulty.

3. The Waste Paper Full Sensor (emitting/receiving) (S011) is faulty.

4. The Trimmer Controller PCB (PCB1) is faulty.

Description The A/D input value does not enter into the D/A output lower

limit of the Waste Paper Full Sensor.

E5F0 -8001 -05 Title Error in the Saddle Lead Edge Stopper Motor (Finisher-D1)

Remedy 1. The connector of the Saddle Lead Edge Stopper HP Sensor (S205) or the Saddle Lead Edge Stopper Motor (M203) are disconnected.

2. The wiring of the Saddle Lead Edge Stopper HP Sensor (S205) or the Saddle Lead Edge Stopper Motor (M203) are faulty.

3. The Saddle Lead Edge Stopper HP Sensor (S205) is faulty.

4. The Saddle Lead Edge Stopper Motor (M203) is faulty.

5. The Saddle Stitcher Controller PCB is faulty.

6. The Finisher Controller PCB is faulty.

Description The Saddle Lead Edge Stopper HP Sensor does not detect the Saddle lead edge stopper when the Saddle lead edge stopper has been moved for 182 mm by Saddle Lead Edge Stopper Motor.

E5F0 -8002 -05 Title Error in the Saddle Lead Edge Stopper Motor (Finisher-D1)

Remedy 1. The connector of the Saddle Lead Edge Stopper HP Sensor (S205) or the Saddle Lead Edge Stopper Motor (M203) are disconnected.

2. The wiring of the Saddle Lead Edge Stopper HP Sensor (S205) or the Saddle Lead Edge Stopper Motor (M203) are faulty.

3. The Saddle Lead Edge Stopper HP Sensor (S205) is faulty.

4. The Saddle Lead Edge Stopper Motor (M203) is faulty.

5. The Saddle Stitcher Controller PCB is faulty.

6. The Finisher Controller PCB is faulty.

Description The Saddle lead edge stopper does not come off the Saddle Lead Edge Stopper HP Sensor when the Saddle Lead Edge Stopper Motor has been driven for 50 pulses.

E5F1 -8001 -05 Title Saddle folder/feeder clock error (Finisher-D1)

Remedy 1. The connector of the Saddle Folder/Feeder Motor Sensor (S214) or the Saddle Folder/Feeder Motor (M206) are disconnected.

2. The wiring of the Saddle Folder/Feeder Motor Sensor (S214) or the Saddle Folder/Feeder Motor (M206) are faulty.

3. The Saddle Folder/Feeder Motor Sensor (S214) is faulty.

4. The Saddle Folder/Feeder Motor (M206) is faulty.

5. The Saddle Stitcher Controller PCB is faulty.

6. The Finisher Controller PCB is faulty.

Description The drive speed of the Saddle Folder/Feeder Motor is less than 5 mm/sec.

E5F1 -8002 -05 Title Error in the Saddle Folder/Feeder Motor (Finisher-D1)

Remedy 1. The connector of the Saddle Folder HP Sensor (S229) or the Saddle Folder/Feeder Motor (M206) are disconnected.

2. The wiring of the Saddle Folder HP Sensor (S229) or the

Saddle Folder/Feeder Motor (M206) are faulty.

3. The Saddle Folder HP Sensor (S229) is faulty.

4. The Saddle Folder/Feeder Motor (M206) is faulty.

5. The Saddle Stitcher Controller PCB is faulty.

6. The Finisher Controller PCB is faulty.

Description The Saddle Folder HP Sensor does not detect the home position of the paper fold roller during initialization.

E5F2 -8001 -05 Title Error in the Saddle Roller Guide Motor (Finisher-D1)

Remedy 1. The connector of the Saddle Roller Guide HP Sensor (S207)

or the Saddle Roller Guide Motor (M204) are disconnected.

2. The wiring of the Saddle Roller Guide HP Sensor (S207) or

the Saddle Roller Guide Motor (M204) are faulty.

3. The Saddle Roller Guide HP Sensor (S207) is faulty.

4. The Saddle Roller Guide Motor (M204) is faulty.

5. The Saddle Stitcher Controller PCB is faulty.

6. The Finisher Controller PCB is faulty.

Description The Saddle Roller Guide HP Sensor does not detect the Saddle roller guide when the saddle roller guide has been moved for 20 mm by Saddle Roller Guide Motor.

E5F2 -8002 -05 Title Error in the Saddle Roller Guide Motor (Finisher-D1)

Remedy 1. The connector of the Saddle Roller Guide HP Sensor (S207)

or the Saddle Roller Guide Motor (M204) are disconnected.

2. The wiring of the Saddle Roller Guide HP Sensor (S207) or

the Saddle Roller Guide Motor (M204) are faulty.

3. The Saddle Roller Guide HP Sensor (S207) is faulty.

4. The Saddle Roller Guide Motor (M204) is faulty.

5. The Saddle Stitcher Controller PCB is faulty.

6. The Finisher Controller PCB is faulty.

Description The saddle roller guide does not come off the Saddle Roller Guide HP Sensor when the Saddle Roller Guide Motor has been driven for 50 pulses.

E5F3 -8001 -05 Title Error in the Saddle Alignment Guide Motor (Finisher-D1)

Remedy 1. The connector of the Saddle Alignment Plate HP Sensor (S206) or the Saddle Alignment Guide Motor (M202) are disconnected.

2. The wiring of the Saddle Alignment Plate HP Sensor (S206) or the Saddle Alignment Guide Motor (M202) are faulty.

3. The Saddle Alignment Plate HP Sensor (S206) is faulty.

4. The Saddle Alignment Guide Motor (M202) is faulty.

5. The Saddle Stitcher Controller PCB is faulty.

6. The Finisher Controller PCB is faulty.

Description The Saddle Alignment Plate HP Sensor does not detect the saddle alignment guide when the saddle alignment guide has been moved for 177 mm by Saddle Alignment Guide Motor.

E5F3 -8002 -05 Title Error in the Saddle Alignment Guide Motor (Finisher-D1)

Remedy 1. The connector of the Saddle Alignment Plate HP Sensor (S206) or the Saddle Alignment Guide Motor (M202) are disconnected.

2. The wiring of the Saddle Alignment Plate HP Sensor (S206)

or the Saddle Alignment Guide Motor (M202) are faulty.

3. The Saddle Alignment Plate HP Sensor (S206) is faulty.

4. The Saddle Alignment Guide Motor (M202) is faulty.

5. The Saddle Stitcher Controller PCB is faulty.

6. The Finisher Controller PCB is faulty.

Description The saddle alignment guide does not come off the Saddle Alignment Plate HP Sensor when the Saddle Alignment Guide Motor has been driven for 50 pulses.

E5F4 -8001 -05 Title Error in the Saddle Stitcher Motor (Finisher-D1)

Remedy 1. The connector of the Saddle Stitcher HP Sensor (S223) or the Saddle Stitcher Motor (M209) are disconnected.

2. The wiring of the Saddle Stitcher HP Sensor (S223) or the

Saddle Stitcher Motor (M209) are faulty.

3. The Saddle Stitcher HP Sensor (S223) is faulty.

4. The Saddle Stitcher Motor (M209) is faulty.

5. The Saddle Stitcher Controller PCB is faulty.

6. The Finisher Controller PCB is faulty.

Description The Saddle Stitcher HP Sensor does not detect the saddle stitcher unit when the Saddle Stitcher Motor has been driven for 480 msec.

E5F4 -8002 -05 Title Error in the Saddle Stitcher Motor (Finisher-D1)

Remedy 1. The connector of the Saddle Stitcher HP Sensor (S223) or the Saddle Stitcher Motor (M209) are disconnected.

2. The wiring of the Saddle Stitcher HP Sensor (S223) or the

Saddle Stitcher Motor (M209) are faulty.

3. The Saddle Stitcher HP Sensor (S223) is faulty.

4. The Saddle Stitcher Motor (M209) is faulty.

5. The Saddle Stitcher Controller PCB is faulty.

6. The Finisher Controller PCB is faulty.

Description The Saddle Stitcher unit does not come off the Saddle Stitcher HP Sensor when the Saddle Stitcher Motor has been driven for 480msec.

E5F5 -8001 -05 Title Error in the Saddle Trailing Edge Retainer Motor (Finisher-D1)

Remedy 1. The connector of the Saddle Trailing Edge Retainer Move HP Sensor (S219) or the Saddle Trailing Edge Retainer Motor (M210) are disconnected.

2. The wiring of the Saddle Trailing Edge Retainer Move HP Sensor (S219) or the Saddle Trailing Edge Retainer Motor (M210) are faulty.

3. The Saddle Trailing Edge Retainer Move HP Sensor (S219) is faulty.

4. The Saddle Trailing Edge Retainer Motor (M210) is faulty.

5. The Saddle Stitcher Controller PCB is faulty.

6. The Finisher Controller PCB is faulty.

Description The Saddle Trailing Edge Retainer Move HP Sensor does not detect the saddle trailing edge retainer when the saddle trailing edge retainer has been moved for 96 mm by Saddle

Trailing Edge Retainer Motor.

E5F5 -8002 -05 Title Error in the Saddle Trailing Edge Retainer Motor (Finisher-D1)

Remedy 1. The connector of the Saddle Trailing Edge Retainer Move HP Sensor (S219) or the Saddle Trailing Edge Retainer Motor (M210) are disconnected.

2. The wiring of the Saddle Trailing Edge Retainer Move HP Sensor (S219) or the Saddle Trailing Edge Retainer Motor (M210) are faulty.

3. The Saddle Trailing Edge Retainer Move HP Sensor (S219) is faulty.

4. The Saddle Trailing Edge Retainer Motor (M210) is faulty.

5. The Saddle Stitcher Controller PCB is faulty.

6. The Finisher Controller PCB is faulty.

Description The Saddle trailing edge retainer does not come off the Saddle Trailing Edge Retainer Move HP Sensor when the Saddle Trailing Edge Retainer Motor has been driven for 50 pulses.

E5F6 -8001 -05 Title Error in the Saddle Paper Push-on Plate Motor (Finisher-D1)

Remedy 1. The connector of the Saddle Paper Push-on Plate HP Sensor (S218) or the Saddle Paper Push-on Plate Motor (M205) are disconnected.

2. The wiring of the Saddle Paper Push-on Plate HP Sensor (S218) or the Saddle Paper Push-on Plate Motor (M205) are faulty.

3. The Saddle Paper Push-on Plate HP Sensor (S218) is faulty.

4. The Saddle Paper Push-on Plate Motor (M205) is faulty.

5. The Saddle Stitcher Controller PCB is faulty.

6. The Finisher Controller PCB is faulty.

Description The Saddle Paper Push-on Plate HP Sensor does not detect the saddle paper push-on plate when the Saddle Paper Pushon Plate Motor has been driven for 500 msec.

E5F6 -8002 -05 Title Error in the Saddle Paper Push-on Plate Motor (Finisher-D1)

Remedy 1. The connector of the Saddle Paper Push-on Plate HP Sensor (S218) or the Saddle Paper Push-on Plate Motor (M205) are disconnected.

2. The wiring of the Saddle Paper Push-on Plate HP Sensor (S218) or the Saddle Paper Push-on Plate Motor (M205) are faulty.

3. The Saddle Paper Push-on Plate HP Sensor (S218) is faulty.

4. The Saddle Paper Push-on Plate Motor (M205) is faulty.

5. The Saddle Stitcher Controller PCB is faulty.

6. The Finisher Controller PCB is faulty.

Description The saddle paper push-on plate does not come off the Saddle Paper Push-on Plate HP Sensor when the Saddle Paper Push-on Plate Motor has been driven for 150 msec.

E5F6 -8003 -05 Title Saddle Paper Push-on Plate Motor clock error (Finisher-D1)

Remedy 1. The connector of the Saddle Paper Push-on Plate Motor

Sensor (S213) or the Saddle Paper Push-on Plate Motor (M205) are disconnected.

2. The wiring of the Saddle Paper Push-on Plate Motor

Sensor (S213) or the Saddle Paper Push-on Plate Motor (M205) are faulty.

3. The Saddle Paper Push-on Plate Motor Sensor (S213) is faulty.

4. The Saddle Paper Push-on Plate Motor (M205) is faulty.

5. The Saddle Stitcher Controller PCB is faulty.

6. The Finisher Controller PCB is faulty.

Description The drive speed of the Saddle Paper Push-on Plate Motor is less than 6 clocks.

E5F7 -8001 -05 Title Error in the Saddle Trailing Edge Retainer Motor (Finisher-D1)

Remedy 1. The connector of the Saddle Trailing Edge Retainer HP Sensor (S221) or the Saddle Trailing Edge Retainer Motor (M210) are disconnected.

2. The wiring of the Saddle Trailing Edge Retainer HP Sensor (S221) or the Saddle Trailing Edge Retainer Motor (M210)  are faulty.

3. The Saddle Trailing Edge Retainer HP Sensor (S221) is faulty.

4. The Saddle Trailing Edge Retainer Motor (M210) is faulty.

5. The Saddle Stitcher Controller PCB is faulty.

6. The Finisher Controller PCB is faulty.

Description The Saddle Trailing Edge Retainer HP Sensor does not detect the Saddle trailing edge retainer when the Saddle Trailing Edge Retainer Motor has been driven for 80 pulses.

E5F7 -8002 -05 Title Error in the Saddle Trailing Edge Retainer Motor (Finisher-D1)

Remedy 1. The connector of the Saddle Trailing Edge Retainer HP Sensor (S221) or the Saddle Trailing Edge Retainer Motor (M210) are disconnected.

2. The wiring of the Saddle Trailing Edge Retainer HP Sensor (S221) or the Saddle Trailing Edge Retainer Motor (M210) are faulty.

3. The Saddle Trailing Edge Retainer HP Sensor (S221) is faulty.

4. The Saddle Trailing Edge Retainer Motor (M210) is faulty.

5. The Saddle Stitcher Controller PCB is faulty.

6. The Finisher Controller PCB is faulty.

Description The saddle trailing edge retainer does not come off the Saddle Trailing Edge Retainer HP Sensor when the Saddle Trailing Edge Retainer Motor has been driven for 50 pulses.

E5F8 -8001 -05 Title Error in the Saddle Tapping Motor (Finisher-D1)

Remedy 1. The connector of the Saddle Paper Tapping HP Sensor (S215) or the Saddle Tapping Motor (M213) are disconnected.

2. The wiring of the Saddle Paper Tapping HP Sensor (S215) or the Saddle Tapping Motor (M213) are faulty.

3. The Saddle Paper Tapping HP Sensor (S215) is faulty.

4. The Saddle Tapping Motor (M213) is faulty.

5. The Saddle Stitcher Controller PCB is faulty.

6. The Finisher Controller PCB is faulty.

Description The Saddle Paper Tapping HP Sensor does not detect the Saddle tapping plate when the Saddle Tapping Motor has been driven for 50 pulses.

E5F8 -8002 -05 Title Error in the Saddle Tapping Motor (Finisher-D1)

Remedy 1. The connector of the Saddle Paper Tapping HP Sensor (S215) or the Saddle Tapping Motor (M213) are disconnected.

2. The wiring of the Saddle Paper Tapping HP Sensor (S215) or the Saddle Tapping Motor (M213) are faulty.

3. The Saddle Paper Tapping HP Sensor (S215) is faulty.

4. The Saddle Tapping Motor (M213) is faulty.

5. The Saddle Stitcher Controller PCB is faulty.

6. The Finisher Controller PCB is faulty.

Description The saddle tapping plate does not come off the Saddle Paper Tapping HP Sensor when the Saddle Tapping Motor has been driven for 50 pulses.

E5F9 -8001 -05 Title Error in the Saddle Lead-in Roller Disengage Motor (Finisher-D1)

Remedy 1. The connector of the Saddle Lead-in Roller HP Sensor (S222) or the Saddle Lead-in Roller Disengage Motor (M214) are disconnected.

2. The wiring of the Saddle Lead-in Roller HP Sensor (S222) or the Saddle Lead-in Roller Disengage Motor (M214) are faulty.

3. The Saddle Lead-in Roller HP Sensor (S222) is faulty.

4. The Saddle Lead-in Roller Disengage Motor (M214) is faulty.

5. The Saddle Stitcher Controller PCB is faulty.

6. The Finisher Controller PCB is faulty.

Description The Saddle Lead-in Roller HP Sensor does not detect the Saddle lead-in roller when the Saddle Lead-in Roller Disengage Motor has been driven for 50 pulses.

E5F9 -8002 -05 Title Error in the Saddle Lead-in Roller Disengage Motor (Finisher-D1)

Remedy 1. The connector of the Saddle Lead-in Roller HP Sensor (S222) or the Saddle Lead-in Roller Disengage Motor (M214) are disconnected.

2. The wiring of the Saddle Lead-in Roller HP Sensor (S222) or the Saddle Lead-in Roller Disengage Motor (M214) are faulty.

3. The Saddle Lead-in Roller HP Sensor (S222) is faulty.

4. The Saddle Lead-in Roller Disengage Motor (M214) is faulty.

5. The Saddle Stitcher Controller PCB is faulty.

6. The Finisher Controller PCB is faulty.

Description The saddle lead-in roller does not come off the Saddle Lead-in Roller HP Sensor when the Saddle Lead-in Roller Disengage Motor has been driven for 50 pulses.