E590 There is a punch motor error. (punch unit)
8001 The punch home position sensor is not detected even when the punch motor
has
been driven for 200 msec.
8002 The puncher does not detect the punch back home position sensor while the
motor is at
rest at time of punch motor initialization
- Check the punch home position
sensor, horizontal registration motor, and punch
driver PCB; thereafter, turn off and then on the main power.
E591 There is a punch dust
sensor error. (punch unit)
8001 The incoming light voltage is faulty in the presence of light.
8002 The incoming light voltage is faulty in the absence of light.
- Turn off and then back on the main
power.
E592 There is a punch
horizontal registration sensor error. (punch unit)
8001 The incoming light voltage is faulty in the presence of light. (trailing
edge sensor).
8002 The incoming light is faulty in the absence of light and voltage.
(trailing edge sensor)
8003 The incoming light voltage is faulty in the presence of light.
(horizontal registration sensor 1)
8004 The incoming light voltage is faulty in the absence of light. (horizontal
registration sensor 1)
8005 The incoming light voltage is faulty in the presence of light. (horizontal
registrationsensor 2)
8006 The incoming light voltage is faulty in the absence of light. (horizontal
registration sensor 2)
8007 The incoming light voltage is faulty in the presence of light. (horizontal
registration sensor 3)
8008 The incoming light voltage is faulty in the absence of light. (horizontal
registration sensor 3)
8009 The incoming light voltage is faulty in the presence of light.
(horizontal registration sensor 4)
800A The incoming light voltage is faulty in the absence of light. (horizontal
registration sensor 4)
- turn off and then back on the main
Power
E593 There is a punch shift motor error. (punch unit)
8001 In the presence of light, the incoming light voltage HP sensor does not go
off.
8002 In the absence of light, the incoming light voltage HP sensor does not go
on.
- Turn off and the back on the main power.
E5F0 There is a saddle paper positioning error.
0001 The paper positioning plate home position sensor does not go on even when
the paper
positioning plate motor has been
driven for 1.33 sec.
paper positioning plate motor (M4S),
paper positioning plate home position sensor (PI7S)
0002 The paper positioning plate home position sensor does not go off even
when the paper positioning plate motor has been driven for 1 sec. paper
positioning plate motor (M4S),paper positioning plate home position sensor (PI7S)
- Check the paper positioning plate
motor (M4S) and the paper positioning plate home position sensor (PI7S).
E5F1 There is a saddle paper
folding error.
0001 The number of detection pulses of the paper folding motor clock sensor is
lower
than a specific value. paper folding
motor (M2S), paper folding motor clock sensor (PI4S)
0002 The start of the paper folding home position sensor does not change even
when
the paper folding motor has been
driven for 3 sec. paper folding motor (M2S), paper folding
motor clock sensor (PI4S)
- Check the paper folding motor
(M2S) and the paper folding motor clock sensor
(PI4S).
E5F2 There is a saddle guide
error.
0001 The guide home position sensor does not go on even when the guide motor
has been driven for 0.455 sec. guide motor (M3S), guide home position sensor
(PI13S)
0002 The guide home position sensor does not go off even when the guide motor
has been
driven for 1 sec. guide motor (M3S),
guide home position sensor (PI13S)
- Check the guide motor (M3S) and
the guide home position sensor (PI13S).
E5F3 There is a saddle alignment error.
0001 The aligning plate home position sensor does not go on even when the
aligning
motor has been driven for 0.5 sec.
(if at time of initialization, 1.67 sec) alignment motor (M5S), aligning plate home
position sensor (PI5S)
0002 The aligning plate home position sensor does not go off even when the
aligning plate has been driven for 1 sec. alignment motor (M5S), aligning plate
home position sensor (PI5S)
- Check the alignment motor (M5S)
and the aligning plate home position sensor (PI5S).
E5F4 There is a saddle rear
stapler error.
0001 The stitching hone position sensor does not go on even when the stitching
motor
(rear) has been driven in reverse
for 0.5 sec or more. stitching motor (rear, M6S), stitching
home position sensor (rear, MS5S)
0002 the stitching home position sensor does not go off even when the
stitching motor (rear)
has been driven in normal direction
for 0.5 sec or more. stitching motor (rear, M6S), stitching
home position sensor (rear, MS5S)
- Check the stitching motor (rear,
M6S) and the stitching home position sensor (rear, MS5S).
E5F5 There is a saddle front
stapling error.
0001 The stitching home position sensor does not go on even when the stitching
motor
(front) has been driven in reverse
for 0.5 sec or more. stitching motor (front, M7S), stitching
home position sensor (front, MS7S)
0002 The stitching home position sensor does not go off even when the
stitching motor
(front) has been driven in normal
direction for 0.5 sec or more. stitching motor (front, M7S), stitching
home position sensor (front, MS7S)
- Check the stitching motor (front,
M7S) and the stitching home position sensor (front, MS7S).
E5F6 There is a saddle butting error.
8001 The paper pushing plate home position sensor does not go on even when the
paper
pushing plate motor has been driven
for 0.3 sec or more.paper pushing plate motor (M8S), paper
pushing plate home position sensor (PI14S)
8002 The paper pushing plate home position sensor does not go off even when the
paper
pushing plate motor has been driven
for 80 msec. paper pushing plate motor (M8S), paper pushing plate home position
sensor (PI14S)
- Check the paper pushing plate
motor (M8S) and the paper pushing plate home position sensor (PI14S).
8003 The number of detection pulses of the paper pushing plate motor clock
sensor is
lower than a specific value. paper
pushing plate motor (M8S), paper pushing plate motor clock sensor (PI1S)
- Check the paper pushing plate
motor (M8S) and the paper pushing plate motor clock sensor (PI1S).
8004 The paper pushing plate leading edge sensor does not go off even when the
paper
pushing plate motor has been driven
for 80 msec. paper pushing plate motor (M8S), paper
pushing plate leading edge position
sensor (PI15S)
8005 The paper pushing plate leading edge position sensor does not go on even
when
the paper pushing plate has been
driven for 0.3 sec or more. paper pushing plate motor (M8S), paper
pushing plate leading edge position
sensor (PI15S)
- Check the power pushing plate
motor (M8S) and the paper pushing plate leading edge position sensor (PI15S).
E5F9 There is a saddle switch error.
0001 With any of the sensor identifying its respective cover as being closed,
the inlet
cover switch is identified as being
open for 1 sec from the start of initial rotation or printing:
- inlet cover sensor (PI9S) - front cover open/closed sensor (PI2S)
- delivery power sensor (PI3S) Or,
the front cover switch (MS2S) or the delivery cover switch (MS3S) is open. inlet
cover switch (MS1S), front cover switch (MS2S), delivery cover switch (MS3S)
- Check the inlet cover switch
(MS1S), front cover switch (MS2S), and the delivery cover switch (MS3S).
0002 With any of the following sensors identifying its respective cover as being
closed, the front cover switch is identified as being open for 1 sec or more
after the start of initial rotation or printing.
- inlet cover sensor (PI9S) - front
cover open/closed sensor (PI2S) - delivery cover sensor (PI3S)
- front cover switch (MS2S),
delivery cover switch (MS3S)
- Check the front cover switch
(MS2S) and the delivery cover switch (MS3S).
0003 With any of the following sensors identifying its respective cover as
being closed, the delivery cover switch is identified as being open for 1 sec
or more from the start of initial rotation or printing:
- inlet cover sensor (PI9S) - front
cover open/closed sensor (PI2S)
- delivery cover sensor (PI3S) -
delivery cover switch (MS3S)
No comments:
Post a Comment