2. The wiring of the Fan (F1) is faulty.
3. The Fan (F1) is faulty.
4. The Insertion Unit Controller PCB is faulty.
Description The loch signal is detected for the specified times while the fan operates.
E551 -0021 -05 Title Error in the Power Supply Fan of the Paper Folding Unit
Remedy 1. The connector of the Fan (F1) is disconnected.
2. The wiring of the Fan (F1) is faulty.
3. The Fan (F1) is faulty.
4. The Paper Folding Unit Controller PCB is faulty.
Description The loch signal is detected for the specified times while the fan operates.
E562 -8001 -05 Title Error in Slowing Timing Sensor (Document Insertion/Folding Unit-H1)
Remedy 1. Connector of the Slowing Timing Sensor (S24) is disconnected.
2. Slowing Timing Sensor (S24) is faulty.
Description The receiving-light intensity failed to be within the threshold
although the emitting-light intensity is adjusted to be within the threshold when adjusting the Sensor.
E562 -8002 -05 Title Error in Disengagement Timing Sensor (Document Insertion/ Folding Unit-H1)
Remedy 1. Connector of the Disengagement Timing Sensor (S21) is disconnected.
2. Disengagement Timing Sensor (S21) is faulty.
Description The receiving-light intensity failed to be within the threshold although the emitting-light intensity is adjusted to be within the threshold when adjusting the Sensor.
E562 -8003 -05 Title Error in Folding Position Accuracy Sensor (Document Insertion/Folding Unit-H1)
Remedy 1. Connector of the Folding Position Accuracy Sensor (S23) is disconnected.
2. Folding Position Accuracy Sensor (S23) is faulty.
Description The receiving-light intensity failed to be within the threshold
although the emitting-light intensity is adjusted to be within the threshold when adjusting the Sensor.
E562 -8004 -05 Title Error in the Upper Stopper HP Sensor (Document Insertion/ Folding Unit-H1)
Remedy 1. Connector of the Upper Stopper HP Sensor (S16) is disconnected.
2. Upper Stopper HP Sensor (S16) is faulty.
Description The receiving-light intensity failed to be within the threshold
although the emitting-light intensity is adjusted to be within the threshold when adjusting the Sensor.
E569 -8001 -05 Title Upper Stopper Motor of Paper Folding Unit failed to go through HP (Document Insertion/Folding Unit-H1)
Remedy 1. Connector of the Upper Stopper Motor (M7) is disconnected.
2. Upper Stopper Motor (M7) is faulty.
3. Connector of the Upper Stopper HP Sensor (S16) is disconnected.
4. Upper Stopper HP Sensor (S16) is faulty.
Description The Upper Stopper HP Sensor failed to be OFF despite the
drive of specified pulse in the case that the Upper Stopper
Motor started to be driven while the Upper Stopper HP Sensor was ON.
E569 -8002 -05 Title Upper Stopper Motor of Paper Folding Unit failed to return to
HP (Document Insertion/Folding Unit-H1)
Remedy 1. Connector of the Upper Stopper Motor (M7) is disconnected.
2. Upper Stopper Motor (M7) is faulty.
3. Connector of the Upper Stopper HP Sensor (S16) is disconnected.
4. Upper Stopper HP Sensor (S16) is faulty.
Description The Upper Stopper HP Sensor failed to be ON despite the
drive of specified pulse in the case that the Upper Stopper
Motor started to be driven while the Upper Stopper HP Sensor was OFF.
E56A -8001 -05 Title C-fold Stopper Motor of Paper Folding Unit failed to go
through HP (Document Insertion/Folding Unit-H1)
Remedy 1. Connector of the C-fold Stopper Motor (M8) is disconnected.
2. C-fold Stopper Motor (M8) is faulty.
3. Connector of the C-fold Stopper HP Sensor (S17) is disconnected.
4. C-fold Stopper HP Sensor (S17) is faulty.
Description The C-fold Stopper Motor HP Sensor failed to be OFF despite
the drive of specified pulse in the case that the C-fold Stopper
Motor started to be driven while the C-fold Stopper Motor HP Sensor was ON.
E56A -8002 -05 Title C-fold Stopper Motor of Paper Folding Unit failed to return to
HP (Document Insertion/Folding Unit-H1)
Remedy 1. Connector of the C-fold Stopper Motor (M8) is disconnected.
2. C-fold Stopper Motor (M8) is faulty.
3. Connector of the C-fold Stopper HP Sensor (S17) is disconnected.
4. C-fold Stopper HP Sensor (S17) is faulty.
Description The C-fold Stopper Motor HP Sensor failed to be ON despite
the drive of specified pulse in the case that the C-fold Stopper
Motor started to be driven while the C-fold Stopper Motor HP Sensor was OFF.
E56B -8001 -05 Title C-fold Tray Motor of Paper Folding Unit failed to go through
HP (Document Insertion/Folding Unit-H1)
Remedy 1. Connector of the C-fold Tray Motor (M6) is disconnected
2. C-fold Tray Motor (M6) is faulty
3. Connector of the C-fold Tray Motor Sensor (S19) is disconnected
4. C-fold Tray Motor Sensor (S19) is faulty
Description The C-fold Tray Motor Sensor failed to be OFF despite the
drive of specified pulse in the case that the C-fold Tray Motor
started to be driven while the C-fold Tray Motor Sensor was ON.
E56B -8002 -05 Title Folding Tray Motor of Paper Folding Unit failed to return to
HP (Document Insertion/Folding Unit-H1)
Remedy 1. Connector of the C-fold Tray Motor (M6) is disconnected.
2. C-fold Tray Motor (M6) is faulty.
3. Connector of the C-fold Tray Motor Sensor (S19) is disconnected.
4. C-fold Tray Motor Sensor (S19) is faulty.
Description The C-fold Tray Motor Sensor failed to be ON despite the drive of specified pulse in the case that the C-fold Tray Motor started to be driven while the C-fold Tray Motor Sensor was OFF.
E584 -0002 -05 Title Shutter home position error (Finisher-E1)
Remedy 1. The Shutter Home Position Sensor (PI113) is faulty.
2. The wiring between the Finisher Controller PCB and Stack
Ejection Motor, and between the Finisher Controller PCB and Shutter Clutch is faulty.
3. The shutter mechanism is faulty.
4. The Stack Ejection Motor (M102), Shutter Clutch (CL101),
ang Stack Ejection Lower Roller Clutch (CL102) is faulty.
5. The Finisher Controller PCB is faulty.
Description The stapler does not return to the shutter home position when
the Stack Ejection Motor has been driven for 3 seconds.
E584 -8001 -05 Title Shutter home position error (Finisher-E1)
Remedy 1. The Shutter Home Position Sensor (PI113) is faulty.
2. The wiring between the Finisher Controller PCB and Stack Ejection Motor, and between the Finisher Controller PCB and Shutter Clutch is faulty.
3. The shutter mechanism is faulty.
4. The Stack Ejection Motor (M102), Shutter Clutch (CL101), ang Stack Ejection Lower Roller Clutch (CL102) is faulty.
5. The Finisher Controller PCB is faulty.
Description The stapler does not leave the shutter home position when
the Stack Ejection Motor has been driven for 3 seconds.
Thousands of Parts and Free Shipping
No comments:
Post a Comment