E905-0001 -05 Title POD Deck Air Assist Fan error
Detection description [POD Deck Lite] When the Air Assist Swing Motor fails to
return to the HP although a specified period of time has passed
Remedy 1. Check connector
disconnection/improper connection. =>
Disconnect and then connect the connector. Target
connector: Deck Lite Controller J04, J05 BoxDriver
J51, J52, J57
2. Replace the Swing Motor (M3) and the Air Assist Fan (FM1,FM2, FM3).
3. Replace the Deck Lite Controller PCB.
4. Replace the BoxDriver PCB.
E905-0002 -05 Title POD Deck Air Assist Fan error
Detection description [POD Deck Lite] When the
Pickup Motor Cooling Fan is not locked
Remedy 1. Check connector
disconnection/improper connection. =>
Disconnect and then connect the connector.
Target connector: Deck Lite Controller J30
2. Replace the Motor Cooling Fan (FM4).
3. Replace the Deck Lite Controller PCB.
E905 -0003 -05 Title POD Deck Air Assist Fan error
Detection description [POD Deck Lite] When the Pickup Motor Cooling Fan is not unlocked
Remedy 1. Check connector
disconnection/improper connection. =>
Disconnect and then connect the connector.
Target connector: Deck Lite Controller J30
2. Replace the Motor Cooling Fan (FM4).
3. Replace the Deck Lite Controller PCB.
E906 -0001 -05 Title POD Deck Air Heater error
Detection description [POD Deck Lite] Air Heater high temperature error
When 120 deg C or higher temperature is detected for 1 second consecutively
Remedy 1. Check connector
disconnection/improper connection. =>
Disconnect and then connect the connector.Target connector: Deck Lite
Controller J03, J05 BoxDriver J52, J54, J58,
J59
2. Replace the Air Heater.
3. Replace the Deck Lite Controller PCB.
E906 -0002 -05 Title POD Deck Air Heater error
Detection description [POD Deck Lite] Air Heater low temperature error
When the heater does not become Ready although a specified
period of time has passed
Remedy 1. Check connector
disconnection/improper connection. =>
Disconnect and then connect the connector.
Target connector: Deck Lite Controller J03, J05
BoxDriver J52, J54, J58, J59
2. Replace the Air Heater.
3. Replace the Deck Lite Controller PCB.
E996 -xxxx -05 Title Timeout error
Detection description The DC Controller is not stopped.The Detailed Code varies
according to the state transition of the software.
Remedy Turn OFF and then ON the
main power.
E996 -0071 -04 Title Frequent error avoidance jam (ADF)
Detection description Frequent error avoidance jam (ADF)
Remedy Depending on the setting
of JM-ERR-R in service mode, “010071” jam is displayed
as an error. Collect log and contact
to the sales companies.
To cancel the setting, select COPIER> OPTION> FNC-SW>
JM-ERR-R, and set JM-ERR-R to 0.
E996 -0CA1 -05 Title Frequent error avoidance jam
(PRINTER)
Detection description Error avoidance jam (PRINTER)
Remedy Make “000CA1” jam to be
displayed as an error by setting JMERR-D in service mode.Collect log and
contact to the sales companies.
To cancel the setting, select COPIER> OPTION> FNC-SW>JM-ERR-D,
and set JM-ERR-D to 0.
E996 -0CA2 -05 Title Frequent error avoidance jam
(PRINTER)
Detection description Error avoidance jam (PRINTER)
Remedy Make “000CA2” jam to be
displayed as an error by setting JMERR-
D in service mode.
Collect log and contact to the sales companies.
To cancel the setting, select COPIER> OPTION> FNC-SW>JM-ERR-D,
and set JM-ERR-D to 0.
E996-0CA3 -05 Title Frequent error avoidance jam
(PRINTER)
Detection description Error avoidance jam (PRINTER)
Remedy Make “000CA3” jam to be
displayed as an error by setting JMERR-
D in service mode.
Collect log and contact to the sales companies.
To cancel the setting, select COPIER> OPTION> FNC-SW>
JM-ERR-D, and set JM-ERR-D to 0.
E996-0CA4 -05 Title Frequent error avoidance jam
(PRINTER)
Detection description Error avoidance jam (PRINTER)
Remedy Make “000CA4” jam to be
displayed as an error by setting JMERR-
D in service mode. Collect log and contact
to the sales companies.
To cancel the setting, select COPIER> OPTION> FNC-SW>
JM-ERR-D, and set JM-ERR-D to 0.
E996-0CA4 -05 Title Frequent error avoidance jam
(PRINTER)
Detection description Error avoidance jam (PRINTER)
Remedy Make “000CA4” jam to be displayed as an error by setting JMERR-
D in service mode.
Collect log and contact to the sales companies.
To cancel the setting, select COPIER> OPTION> FNC-SW>
JM-ERR-D, and set JM-ERR-D to 0.
E996 -0CAF -05 Title Frequent error avoidance jam
(PRINTER)
Detection description Error avoidance jam (PRINTER)
Remedy Make “000CAF” jam to be
displayed as an error by setting JMERR-
D in service mode.Collect log and contact to the sales companies.
To cancel the setting, select COPIER> OPTION> FNC-SW>
JM-ERR-D, and set JM-ERR-D to 0
No comments:
Post a Comment