Parts Name Parts Nunber Piece Expected life* COUNTER (PRDC-1)Remarks
Primary Charging Wire FB4-3687 2 50** PRM-WIRE With spring
Primary Charging Wire cleaner FL2-0462 2 50** PRM-CLN
Primary Charging Wir cleaner holder FL2-2720 2 50** PRM-CLN
Grid Wire FY1-0883 AR 50 PRM-GRID
Pre-transfer Charging Wire FB4-3687 1 50** PO-WIRE With spring
Pre-transfer Charging Wire cleaner FL2-0462 1 50** PO-CLN
Pre-transfer Charging Wire cleaner holder FL2-2720 1 50** PO-CLN
■Consumable Parts
Parts Name Parts Nunber Piece Expected life COUNTER (DRBL-1) Remarks
Primary Charging Assembly FM3-7288 1 150 PRM-UNIT
Pre-transfer Charging Assembly FM3-7297 1 150 PO-UNIT
Pre-exposure Scraper FC9-9153 2 50 EXP-SCRP
Drum Cleaning Blade FC8-7085 1 60 CLN-BLD
Drum Front Side Seal/
Drum RearSide Seal FC8-7086 1 each 50 BS-SL-F BS-SL-R
Drum Separation Claw FB4-8018 3 50 SP-CLAW
Developing Cylinder FM4-0959 1 100** DVG-CYL
ETB FC8-7160 1 50 TR-BLT
Transfer Roller FC8-7159 1 50 TR-ROLL
Brush Roller FC9-9022 1 50 T-CN-BRU
ETB Cleaning Blade FC6-1647 1 50 T-CLN-BD
Parts/Area
Name Expected life* Remarks
Toner
Receptacle Tray As needed Remove toner on the tray.
Primary
Charging Assembly Grid Wire 50 Clean with lint-free paper moistened with water.
Primary
Charging AssemblyShield Plate 50 Clean with lint-free paper moistened with water.
Pre-transfer Charging Assembly Shield
Plate 50 Clean with lint-free paper moistened with
water.
Pre-transfer Charging AssemblyDust Collection Roller 50 Clean
with lint-free
paper
moistened with alcohol.
Pre-transfer Charging Assembly Roller
electrode area 50 Clean
with lint-free
paper moistened with alcohol.
Pre-transfer ChargingAssemblyToner
collection area 50 Remove toner in the
toner collection area.
Drum
Cleaning Unit Plate 50 Clean with lint-free paper moistened with alcohol.
Pre-exposure Scraper As needed Clean with lint-free paper moistened with
alcohol.
Drum
Cleaning Unit Toner collection area 50 Crumb
toner clusters.
Drum Sliding Assembly As needed Apply lubricant at the Drum Sliding Assembly
when abnormal sound is heard at the time of operation.
Drum Surface 30 Using lint-free paper, clean the drum with the drum cleaning powder (CK-0429).
Drum Edge 25 Clean with lint-free paper moistened
Separation Claw Mounting Base 50 Clean with lint-free paper moistened with
alcohol.
Patch Sensor 50 Clean in the single direction with a wet and
tightlywrung cotton swab. (Be sure to clean the surface of the sensor
thoroughly.) Do not use alcohol when cleaning.
Process
Unit Rear Guide
50 Clean with lint-free paper moistened with
alcohol.
Developing Roller 50 Clean with lint-free paper moistened with
alcohol.
Lower side of Cylinder. 50 Clean with lint-free paper moistened with
alcohol.
Developing Sleeve Holder 50
Clean with lint-free paper
moistened with alcohol.
The host machine surface below
the Developing Assembly As needed Remove toner which was scattered at removal
of
Developing Assembly.
ETB Drive Roller 50 Clean with lint-free paper moistened with
alcohol.
ETB Idler Roller 50 Clean with lint-free paper moistened with
alcohol.
Waste Toner Container 50 Clean when the message is displayed
No comments:
Post a Comment