Canon ImageRunner Advance 8105 8095 8085,Errorcode E530 To E542

 

E530 -8000 -05 Title Error in the Front or Rear Alignment Motor (Finisher-D1)

Remedy 1. The connector of the Front/Rear Alignment HP Sensor

(S108/S109) or the Front/Rear Alignment Motor (M108/ M109) are disconnected.

2. The wiring of the Front/Rear Alignment HP Sensor (S108/ S109) or the Front/Rear Alignment Motor (M108/M109) are faulty.

3. The Front/Rear Alignment HP Sensor (S108/S109) is faulty.

4. The Front/Rear Alignment Motor (M108/M109) is faulty.

5. The Finisher Controller PCB is faulty.

Description The Front or Rear Alignment Motor operate abnormally during initialization.

E530 -8001 -05 Title Error in the Front Alignment Motor (Finisher-D1)

Remedy 1. The connector of the Front Alignment HP Sensor (S108) or

the Front Alignment Motor (M108) are disconnected.

2. The wiring of the Front Alignment HP Sensor (S108) or the

Front Alignment Motor (M108) are faulty.

3. The Front Alignment HP Sensor (S108) is faulty.

4. The Front Alignment Motor (M108) is faulty.

5. The Finisher Controller PCB is faulty.

Description The front alignment plate does not come off the Front

Alignment HP Sensor when the Front Alignment Motor has

been driven for 4 seconds.

E530 -8002 -05 Title Error in the Front Alignment Motor (Finisher-D1)

Remedy 1. The connector of the Front Alignment HP Sensor (S108) or

the Front Alignment Motor (M108) are disconnected.

2. The wiring of the Front Alignment HP Sensor (S108) or the

Front Alignment Motor (M108) are faulty.

3. The Front Alignment HP Sensor (S108) is faulty.

4. The Front Alignment Motor (M108) is faulty.

5. The Finisher Controller PCB is faulty. E531 -8001 -05 Title Error in the Staple Motor (Finisher-D1)

Remedy 1. The connector of the staple unit is disconnected.

2. The wiring of the staple unit is faulty.

3. The staple unit is faulty.

4. The Finisher Controller PCB is faulty.

Description The staple unit does not come off the Staple HP Sensor when

the Staple Motor has been driven for 400 msec.

E531 -8002 -05 Title Error in the Staple Motor (Finisher-D1)

Remedy 1. The connector of the staple unit is disconnected.

2. The wiring of the staple unit is faulty.

3. The staple unit is faulty.

4. The Finisher Controller PCB is faulty.

Description The Staple HP Sensor does nor detect the staple unit when

the Staple Motor has been driven for 400 msec.

E532 -8000 -05 Title Error in the Staple Shift Motor (Finisher-D1)

Remedy 1. The connector of the Stapler Shift HP Sensor (S107) or the

Staple Shift Motor (M107) are disconnected.

2. The wiring of the Stapler Shift HP Sensor (S107) or the

Staple Shift Motor (M107) are faulty.

3. The Stapler Shift HP Sensor (S107) is faulty.

4. The Staple Shift Motor (M107) is faulty.

5. The Finisher Controller PCB is faulty.

Description The Staple Shift Motor operate abnormally during

initialization.

E532 -8001 -05 Title Error in the Staple Shift Motor (Finisher-D1)

Remedy 1. The connector of the Stapler Shift HP Sensor (S107) or the

Staple Shift Motor (M107) are disconnected.

2. The wiring of the Stapler Shift HP Sensor (S107) or the

Staple Shift Motor (M107) are faulty.

3. The Stapler Shift HP Sensor (S107) is faulty.

4. The Staple Shift Motor (M107) is faulty.

5. The Finisher Controller PCB is faulty.

Description The staple unit does not come off the Stapler Shift HP Sensor

when the Staple Shift Motor has been driven for 5 seconds.

E532 -8002 -05 Title Error in the Staple Shift Motor (Finisher-D1)

Remedy 1. The connector of the Stapler Shift HP Sensor (S107) or the

Staple Shift Motor (M107) are disconnected.

2. The wiring of the Stapler Shift HP Sensor (S107) or the

Staple Shift Motor (M107) are faulty.

3. The Stapler Shift HP Sensor (S107) is faulty.

4. The Staple Shift Motor (M107) is faulty.

5. The Finisher Controller PCB is faulty.

Description The Stapler Shift HP Sensor does not detect the staple unit

when the Staple Shift Motor has been driven for 5 seconds.Alignment plate when the Front Alignment Motor has been

driven for 4 seconds.

E531 -8001 -05 Title Error in the Staple Motor (Finisher-D1)

Remedy 1. The connector of the staple unit is disconnected.

2. The wiring of the staple unit is faulty.

3. The staple unit is faulty.

4. The Finisher Controller PCB is faulty.

Description The staple unit does not come off the Staple HP Sensor when

the Staple Motor has been driven for 400 msec.

E531 -8002 -05 Title Error in the Staple Motor (Finisher-D1)

Remedy 1. The connector of the staple unit is disconnected.

2. The wiring of the staple unit is faulty.

3. The staple unit is faulty.

4. The Finisher Controller PCB is faulty.

Description The Staple HP Sensor does nor detect the staple unit when

the Staple Motor has been driven for 400 msec.

E532 -8000 -05 Title Error in the Staple Shift Motor (Finisher-D1)

Remedy 1. The connector of the Stapler Shift HP Sensor (S107) or the

Staple Shift Motor (M107) are disconnected.

2. The wiring of the Stapler Shift HP Sensor (S107) or the

Staple Shift Motor (M107) are faulty.

3. The Stapler Shift HP Sensor (S107) is faulty.

4. The Staple Shift Motor (M107) is faulty.

5. The Finisher Controller PCB is faulty.

Description The Staple Shift Motor operate abnormally during

initialization.

E532 -8001 -05 Title Error in the Staple Shift Motor (Finisher-D1)

Remedy 1. The connector of the Stapler Shift HP Sensor (S107) or the

Staple Shift Motor (M107) are disconnected.

2. The wiring of the Stapler Shift HP Sensor (S107) or the

Staple Shift Motor (M107) are faulty.

3. The Stapler Shift HP Sensor (S107) is faulty.

4. The Staple Shift Motor (M107) is faulty.

5. The Finisher Controller PCB is faulty.

Description The staple unit does not come off the Stapler Shift HP Sensor

when the Staple Shift Motor has been driven for 5 seconds.

E532 -8002 -05 Title Error in the Staple Shift Motor (Finisher-D1)

Remedy 1. The connector of the Stapler Shift HP Sensor (S107) or the

Staple Shift Motor (M107) are disconnected.

2. The wiring of the Stapler Shift HP Sensor (S107) or the

Staple Shift Motor (M107) are faulty.

3. The Stapler Shift HP Sensor (S107) is faulty.

4. The Staple Shift Motor (M107) is faulty.

5. The Finisher Controller PCB is faulty.

Description The Stapler Shift HP Sensor does not detect the staple unit

when the Staple Shift Motor has been driven for 5 seconds.

E535 -0001 -05 Title Error in the Swing Guide Motor (Finisher-D1)

Remedy 1. The connector of the Swing Guide HP Sensor (S110) or the

Swing Guide Motor (M110) are disconnected.

2. The wiring of the Swing Guide HP Sensor (S110) or the

Swing Guide Motor (M110) are faulty.

3. The Swing Guide HP Sensor (S110) is faulty.

4. The Swing Guide Motor (M110) is faulty.

5. The Finisher Controller PCB is faulty.

Description The swing guide does not come off the Swing Guide HP

Sensor when the Swing Guide Motor has been driven for 3

seconds.

E535 -0002 -05 Title Error in the Swing Guide Motor (Finisher-D1)

Remedy 1. The connector of the Swing Guide HP Sensor (S110) or the

Swing Guide Motor (M110) are disconnected.

2. The wiring of the Swing Guide HP Sensor (S110) or the

Swing Guide Motor (M110) are faulty.

3. The Swing Guide HP Sensor (S110) is faulty.

4. The Swing Guide Motor (M110) is faulty.

5. The Finisher Controller PCB is faulty.

Description The Swing Guide HP Sensor does not detect the swing guide

when the Swing Guide Motor has been driven for 3 seconds.

E535 -0003 -05 Title Error in the Swing Guide Motor (Finisher-D1)

Remedy 1. The connector of the Swing Guide Height Detection Sensor

(S118) or the Swing Guide Motor (M110) are disconnected.

2. The wiring of the Swing Guide Height Detection Sensor

(S118) or the Swing Guide Motor (M110) are faulty.

3. The Swing Guide Height Detection Sensor (S118) is faulty.

4. The Swing Guide Motor (M110) is faulty.

5. The Finisher Controller PCB is faulty.

Description The Swing Guide Height Detection Sensor failed to be ON

even though specified period of time has passed when

lowering the swing guide.

E535 -0004 -05 Title Error in the Swing Guide Motor (Finisher-D1)

Remedy 1. The connector of the Swing Guide Height Detection Sensor

(S118) or the Swing Guide Motor (M110) are disconnected.

2. The wiring of the Swing Guide Height Detection Sensor

(S118) or the Swing Guide Motor (M110) are faulty.

3. The Swing Guide Height Detection Sensor (S118) is faulty.

4. The Swing Guide Motor (M110) is faulty.

5. The Finisher Controller PCB is faulty.

Description The Swing Guide Height Detection Sensor failed to be OFF

even though specified period of time has passed when raising

the swing unit.

E537 -8001 -05 Title Error in the Rear Alignment Motor (Finisher-D1)

Remedy 1. The connector of the Rear Alignment HP Sensor (S109) or

the Rear Alignment Motor (M109) are disconnected.

2. The wiring of the Rear Alignment HP Sensor (S109) or the

Rear Alignment Motor (M109) are faulty.

3. The Rear Alignment HP Sensor (S109) is faulty.

4. The Rear Alignment Motor (M109) is faulty.

5. The Finisher Controller PCB is faulty.

Description The rear alignment plate does not come off the Rear

Alignment HP Sensor when the Rear Alignment Motor has

been driven for 4 seconds.

E537 -8002 -05 Title Error in the Rear Alignment Motor (Finisher-D1)

Remedy 1. The connector of the Rear Alignment HP Sensor (S109) or

the Rear Alignment Motor (M109) are disconnected.

2. The wiring of the Rear Alignment HP Sensor (S109) or the

Rear Alignment Motor (M109) are faulty.

3. The Rear Alignment HP Sensor (S109) is faulty.

4. The Rear Alignment Motor (M109) is faulty.

5. The Finisher Controller PCB is faulty.

Description The Rear Alignment HP Sensor does not detect the rear

alignment plate when the Rear Alignment Motor has been

driven for 4 seconds.

E540 -8001 -05 Title Tray 1 time out error (Finisher-D1)

Remedy 1. The connectors of the Tray 1 Area Sensors (S122/S123/

S124) or the Tray 1 Shift Motor (M105) are disconnected.

2. The wiring of the Tray 1 Area Sensors (S122/S123/S124)

or the Tray 1 Shift Motor (M105) are faulty.

3. The Tray 1 Area Sensors (S122/S123/S124) is faulty.

4. The Tray 1 Shift Motor (M105) is faulty.

5. The Finisher Controller PCB is faulty.

Description 1. The tray 1 does not return to home position when the Tray

1 Shift Motor has been driven for 20 seconds.

2. The tray 1 does not come off the Tray 1 Area Sensor at the

same area when the Tray 1 Shift Motor has been driven for

4 seconds.

E540 -8002 -05 Title Tray 1 area error (Finisher-D1)

Remedy 1. The connectors of the Tray 1 Area Sensors (S122/S123/

S124) or the Tray 1 Shift Motor (M105) are disconnected.

2. The wiring of the Tray 1 Area Sensors (S122/S123/S124)

or the Tray 1 Shift Motor (M105) are faulty.

3. The Tray 1 Area Sensors (S122/S123/S124) is faulty.

4. The Tray 1 Shift Motor (M105) is faulty.

5. The Finisher Controller PCB is faulty.

Description The tray 1 detects the discontinuous area with the Tray 1

Area Sensors.

E540 -8003 -05 Title Error in the Tray 1 Lower Safety Switch (Finisher-D1)

Remedy 1. The connector of the Tray 1 Lower Safety Switch (SW110)

or the Tray 1 Shift Motor (M105) are disconnected.

2. The wiring of the Tray 1 Lower Safety Switch (SW110) or

the Tray 1 Shift Motor (M105) are faulty.

3. The Tray 1 Lower Safety Switch (SW110) is faulty.

4. The Tray 1 Shift Motor (M105) is faulty.

5. The Finisher Controller PCB is faulty.

Description The Tray 1 Lower Safety Switch is turned ON while the tray 1

operates.

E540 -8013 -05 Title Error in the Swing Guide Safety Switch (Finisher-D1)

Remedy 1. The connector of the Swing Guide Safety Switch (front/

rear) (SW102/SW104) or the Staple Position Switch

(SW103) are disconnected.

2. The connector of the Swing Guide Solenoid (SL101) or the

Tray 1 Shift Motor (M105) are disconnected.

3. The wiring of the Swing Guide Safety Switch (front/rear)

(SW102/SW104) or the Staple Position Switch (SW103)

are faulty.

4. The wiring of the Swing Guide Solenoid (SL101) or the

Tray 1 Shift Motor (M105) are faulty.

5. The Swing Guide Safety Switch (front/rear) (SW102/

SW104) is faulty.

6. The Staple Position Switch (SW103) is faulty.

7. The Swing Guide Solenoid (SL101) is faulty.

8. The Tray 1 Shift Motor (M105) is faulty.

9. The Finisher Controller PCB is faulty.

Description The Swing Guide Safety Switch (front/rear) is turned ON

while the tray 1 operates.

E542 -8001 -05 Title Tray 2 time out error (Finisher-D1)

Remedy 1. The connectors of the Tray 2 Area Sensors (S125/S126/

S127) or the Tray 2 Shift Motor (M217) are disconnected.

2. The wiring of the Tray 2 Area Sensors (S125/S126/S127)

or the Tray 2 Shift Motor (M217) are faulty.

3. The Tray 2 Area Sensors (S125/S126/S127) is faulty.

4. The Tray 2 Shift Motor (M217) is faulty.

5. The Finisher Controller PCB is faulty.

Description 1. The tray 2 does not return to home position when the Tray

2 Shift Motor has been driven for 20 seconds.

2. The tray 2 does not come off the Tray 2 Area Sensor at the

same area when the Tray 2 Shift Motor has been driven for

4 seconds.

E542 -8002 -05 Title Tray 2 area error (Finisher-D1)

Remedy 1. The connectors of the Tray 2 Area Sensors (S125/S126/

S127) or the Tray 2 Paper Sensor (S105) are disconnected.

2. The connector of the Tray 2 Shift Motor (M217) is

disconnected.

3. The wiring of the Tray 2 Area Sensors (S125/S126/S127)

or the Tray 2 Paper Sensor (S105) are faulty.

4. The wiring of the Tray 2 Shift Motor (M217) is faulty.

5. The Tray 2 Area Sensors (S125/S126/S127) is faulty.

6. The Tray 2 Paper Sensor (S105) is faulty.

7. The Tray 2 Shift Motor (M217) is faulty.

8. The Finisher Controller PCB is faulty.

Description The tray 2 detects the discontinuous area with the Tray 2

Area Sensors.

E542 -8003 -05 Title Error in the Tray 1 Lower Safety Switch (Finisher-D1)

Remedy 1. The connector of the Tray 1 Lower Safety Switch (SW110)

or the Tray 2 Shift Motor (M217) are disconnected.

2. The wiring of the Tray 1 Lower Safety Switch (SW110) or

the Tray 2 Shift Motor (M217) are faulty.

3. The Tray 1 Lower Safety Switch (SW110) is faulty.

4. The Tray 2 Shift Motor (M217) is faulty.

5. The Finisher Controller PCB is faulty.

Description The Tray 1 Lower Safety Switch is turned ON while the tray 2

operates.

E542 -8013 -05 Title Error in the Swing Guide Safety Switch (Finisher-D1)

Remedy 1. The connector of the Swing Guide Safety Switch (front/

rear) (SW102/SW104) or the Staple Position Switch

(SW103) are disconnected.

2. The connector of the Swing Guide Solenoid (SL101) or the

Tray 2 Shift Motor (M217) are disconnected.

3. The wiring of the Swing Guide Safety Switch (front/rear)

(SW102/SW104) or the Staple Position Switch (SW103)

are faulty.

4. The wiring of the Swing Guide Solenoid (SL101) or the

Tray 2 Shift Motor (M217) are faulty.

5. The Swing Guide Safety Switch (front/rear) (SW102/

SW104) is faulty.

6. The Staple Position Switch (SW103) is faulty.

7. The Swing Guide Solenoid (SL101) is faulty.

8. The Tray 2 Shift Motor (M217) is faulty.

9. The Finisher Controller PCB is faulty.

Description The Swing Guide Safety Switch (front/rear) is turned ON while the tray 2 operates.