Detection description The Registration HP Sensor does not turn ON when the
Registration
Motor has been driven for 2.933 seconds.
Remedy 1. The connector of the Registration HP Sensor (S105)
or the Registration Motor (M102) are disconnected.
2.
The wiring of the Registration HP Sensor (S105) or the Registration Motor (M102) are faulty.
3.
The Registration HP Sensor (S105) is faulty.
4.
The Registration Motor (M102) is faulty.
5.
The Trimmer Controller PCB (PCB1) is faulty.
E5A3 -0002 -05 Title Error in the Registration Motor (Finisher-N1)
Detection description The Registration HP Sensor does not turn OFF when the
Registration
Motor has been driven for 670 msec.
Remedy 1. The connector of the Registration HP Sensor
(S105) or the
Registration
Motor (M102) are disconnected.
2.
The wiring of the Registration HP Sensor (S105) or the Registration Motor (M102) are faulty.
3.
The Registration HP Sensor (S105) is faulty.
4.
The Registration Motor (M102) is faulty.
5. The Trimmer Controller
PCB (PCB1) is faulty.
E5A4 -8001 -05 Title Error in the Press Motor (Finisher-N1)
Detection description The Press Motor HP Sensor does not turn ON when the Press
Motor
has been driven for 926 msec.
Remedy 1. The connector of the Press Motor HP Sensor
(S106) or the Press Motor (M105) are disconnected.
2.
The wiring of the Press Motor HP Sensor (S106) or the Press Motor (M105) are faulty.
3.
The Press Motor HP Sensor (S106) is faulty.
4.
The Press Motor (M105) is faulty.
5.
The Trimmer Controller PCB (PCB1) is faulty.
E5A4 -8002 -05 Title Error in the Press Motor (Finisher-N1)
Detection description The Press Motor HP Sensor does not turn OFF when the
Press
Motor has been driven for 601 msec.
Remedy 1. The connector of the Press Motor HP Sensor
(S106) or the Press Motor (M105) are disconnected.
2.
The wiring of the Press Motor HP Sensor (S106) or the Press Motor (M105) are faulty.
3.
The Press Motor HP Sensor (S106) is faulty.
4.
The Press Motor (M105) is faulty.
5. The
Trimmer Controller PCB (PCB1) is faulty.
E5A7 -8011 -05 Title The feeding claw operating motor (M02) of the booklet
trimmer
has not been arrived at home position.
Detection description The feeding claw home position sensor (PI04) failed to be ON
Remedy
1. Connector check 2. Replacement of sensor 3. Replacement of motor
E5A7 -8012 -05 Title The feeding claw operating motor (M02) of the booklet
trimmer
is remained at home position.
Detection description The feeding claw home position sensor (PI04) failed to be OFF
Remedy 1. Connector check 2. Replacement of sensor 3. Replacement of motor
E5A7 -8021 -05 Title The head-and-tail guide motor (M03) of the booklet
trimmer
has not been arrived at home position
Detection description The head-and-tail guide home position sensor (PI03) failed to be ON
Remedy 1. Connector check 2. Replacement of sensor 3. Replacement of motor
E5A7 -8022 -05 Title The head-and-tail guide motor (M03) of the booklet
trimmer is
remained at home position
Detection description The head-and-tail guide home position sensor (PI03) failed to be OFF
Remedy 1. Connector check 2. Replacement of sensor 3. Replacement of motor
E5A7 -8025 -05 Title EEPROM error with the booklet trimmer
Detection description
There
is a failure with the numerical value for home position
that
has been saved
Remedy
Replacement of trimmer controller PCB
E5A7 -8033 -05 Title The driver with the trimming area feed motor (M04) of
the
booklet trimmer is faulty
Detection description There was a failure in the trimming area feed motor driver PCB (A04)
Remedy 1. Connector check 2. Replacement of motor 3. Replacement of driver PCB
E5A7 -8043 -05 Title The driver with the trimming motor (M05) of the
booklet
trimmer is faulty
Detection description There was a failure in the trimming motor driver PCB (A05)
Remedy
-
E5A7 -8044 -05 Title The upper limit is failed to be detected with the
upper blade of
the booklet trimmer
Detection description The upper blade upper limit sensor (PI06) failed to be ON
although
the upper blade has moved for a certain distance
Remedy
-
E5A7 -8051 -05 Title The stopper shift motor (M06) of the booklet trimmer
has not
been arrived at home position
Detection description The stopper home position sensor (PI05) failed to be ON
Remedy
-
E5A7 -8052 -05 Title The stopper shift motor (M06) of the booklet trimmer
is
remained at home position
Detection description The stopper home position sensor (PI05) failed to be OFF
Remedy
E5A7 -8055 -05 Title Home position data of trimming stopper positioning
motor is
incorrect
Detection description-
Remedy 1. Home position adjustment 2. Replace the trimmer controller PCB
E5A7 -8061 -05 Title The conveyer retaining roller shift motor (M08) of
the booklet
trimmer has not been arrived at home position
Detection description The retaining roller home position sensor (PI14) failed to be ON
Remedy 1. Connector check 2. Replacement of sensor 3. Replacement of motor
E5A7 -8062 -05 Title The conveyer retaining roller shift motor (M08) of
the booklet
trimmer is remained at home position
Detection description The retaining roller home position sensor (PI14) failed to be OFF
Remedy 1. Connector check 2. Replacement of sensor 3. Replacement of motor
E5A7 -8065 -05 Title Home position data of conveyer delivery roller motor
is
incorrect.
Detection description
Remedy 1. Home position adjustment 2. Replace the trimmer
controller PCB
E5A7 -8073 -05 Title The driver with the main feed motor (M10) of the
booklet
trimmer is faulty
Detection description There was a failure in the main feed motor driver PCB (A10)
Remedy 1. Connector check 2. Replacement of motor 3. Replacement of driver PCB
E5AA -8001 -05 Title Error in the Cutter Motor (Finisher-N1)
Detection description The home position of the trimming blade is not detected when
the
Cutter Motor has been driven for 5 seconds.
Remedy 1. The connector of the Cutter Motor Clock Sensor
(S108) or
the
Cutter Motor (M106) are disconnected.
2.
The wiring of the Cutter Motor Clock Sensor (S108) or the Cutter Motor (M106) are
faulty.
3.
The Cutter Motor Clock Sensor (S108) is faulty.
4.
The Cutter Motor (M106) is faulty.
5. The Trimmer Controller
PCB (PCB1) is faulty.
E5AA -8002 -05 Title Error in the Cutter Motor (Finisher-N1)
Detection description The Cutter Motor Clock Sensor does not come off the home
position
of the trimming blade when the Cutter Motor has been
driven
for 500 msec.
Remedy 1. The connector of the Cutter Motor Clock
Sensor (S108) or the Cutter Motor (M106) are disconnected.
2.
The wiring of the Cutter Motor Clock Sensor (S108) or the Cutter Motor (M106) are
faulty.
3.
The Cutter Motor Clock Sensor (S108) is faulty.
4.
The Cutter Motor (M106) is faulty.
5.
The Trimmer Controller PCB (PCB1) is faulty.
E5AA -8003 -05 Title Cutter Motor clock error (Finisher-N1)
Detection description The Cutter Motor Clock Sensor does not detect the Motor
clock
when the Cutter Motor has been driven for 625 msec.
Remedy 1. The connector of the Cutter Motor Clock Sensor
(S108) or
the
Cutter Motor (M106) are disconnected.
2.
The wiring of the Cutter Motor Clock Sensor (S108) or the Cutter Motor (M106) are
faulty.
3.
The Cutter Motor Clock Sensor (S108) is faulty.
4.
The Cutter Motor (M106) is faulty.
5.
The Trimmer Controller PCB (PCB1) is faulty.
E5AE -8000 -05 Title Trimmer stationary paper error
Detection description The Inlet Sensor detects the stationary paper after performing
the
paper delivery operation.
Remedy 1. The paper has jammed in the Trimmer.
2.
The connector of the Inlet Sensor (S101) is disconnected.
3.
The wire of the Inlet Sensor (S101) is faulty.
4.
The Inlet Sensor (S101) is faulty.
5.
The Trimmer Controller PCB (PCB1) is faulty.
E5BA -8001 -05 Title Error in the Front Estrangement Motor (Finisher-N1)
Detection description The Front Estrangement Motor HP Sensor does not turn
ON
when the Front Estrangement Motor has been driven for 191msec.
Remedy 1. The connector of the Front Estrangement Motor
HP Sensor (S102) or the Front Estrangement Motor (M103) are disconnected.
2.
The wiring of the Front Estrangement Motor HP Sensor
(S102)
or the Front Estrangement Motor (M103) are faulty.
3.
The Front Estrangement Motor HP Sensor (S102) is faulty.
4.
The Front Estrangement Motor (M103) is faulty.
5. The Trimmer Controller
PCB (PCB1) is faulty.
E5BA -8002 -05 Title Error in the Front Estrangement Motor (Finisher-N1)
Detection description The Front Estrangement Motor HP Sensor does not turn OFF when the Front Estrangement Motor has been driven
for 724 msec. after the Front Estrangement Motor HP
Sensor has
turned
ON.
Remedy 1. The connector of the Front Estrangement Motor
HP Sensor(S102) or the Front Estrangement Motor (M103) are disconnected.
2.
The wiring of the Front Estrangement Motor HP Sensor
(S102)
or the Front Estrangement Motor (M103) are faulty.
3.
The Front Estrangement Motor HP Sensor (S102) is faulty.
4.
The Front Estrangement Motor (M103) is faulty.
5.
The Trimmer Controller PCB (PCB1) is faulty.
E5BA -8011 -05 Title Error in the Rear Estrangement Motor (Finisher-N1)
Detection description The Rear Estrangement Motor HP Sensor does not turn ON when the Rear Estrangement Motor has been driven
for 180 msec.
Remedy 1. The connector of the Rear Estrangement Motor
HP Sensor (S104) or the Rear Estrangement Motor (M104) are disconnected.
2.
The wiring of the Rear Estrangement Motor HP Sensor (S104) or the Rear Estrangement Motor (M104) are
faulty.
3.
The Rear Estrangement Motor HP Sensor (S104) is faulty.
4.
The Rear Estrangement Motor (M104) is faulty.
5.
The Trimmer Controller PCB (PCB1) is faulty.
E5BA -8012 -05 Title Error in the Rear Estrangement Motor (Finisher-N1)
Detection description The Rear Estrangement Motor HP Sensor does not turn OFF
when
the Rear Estrangement Motor has been driven for 537 msec.
Remedy 1. The connector of the Rear Estrangement Motor
HP Sensor (S104) or the Rear Estrangement Motor (M104) aredisconnected.
2.
The wiring of the Rear Estrangement Motor HP Sensor (S104) or the Rear Estrangement Motor (M104) are
faulty.
3.
The Rear Estrangement Motor HP Sensor (S104) is faulty.
4.
The Rear Estrangement Motor (M104) is faulty.
5.
The Trimmer Controller PCB (PCB1) is faulty.
E5BB -8001 -05 Title Error in the Waste Paper Full Sensor (Finisher-N1)
Detection description The A/D input value does not enter into the D/A output upper
limit
of the Waste Paper Full Sensor.
Remedy 1. The connector of the Waste Paper Full Sensor
(emitting/ receiving) (S011) is disconnected.
2.
The wire of the Waste Paper Full Sensor (emitting/receiving) (S011) is faulty.
3.
The Waste Paper Full Sensor (emitting/receiving) (S011) is faulty.
4. The Trimmer Controller
PCB (PCB1) is faulty.
E5BB -8002 -05 Title Error in the Waste Paper Full Sensor (Finisher-N1)
Detection description The A/D input value does not enter into the D/A output lower
limit
of the Waste Paper Full Sensor.
Remedy 1. The connector of the Waste Paper Full Sensor
(emitting/ receiving) (S011) is disconnected.
2.
The wire of the Waste Paper Full Sensor (emitting/receiving) (S011) is faulty.
3.
The Waste Paper Full Sensor (emitting/receiving) (S011) is faulty.
4.
The Trimmer Controller PCB (PCB1) is faulty.
E5F0 -8001 -05 Title Error in the Saddle Lead Edge Stopper Motor
(Finisher-N1)
Detection description The Saddle Lead Edge Stopper HP Sensor does not detect
the
Saddle lead edge stopper when the Saddle lead edge stopper has been moved for 182 mm by Saddle Lead
Edge Stopper Motor.
Remedy 1. The connector of the Saddle Lead Edge Stopper
HP Sensor (S205) or the Saddle Lead Edge Stopper Motor (M203) are disconnected.
2.
The wiring of the Saddle Lead Edge Stopper HP Sensor (S205) or the Saddle Lead Edge Stopper Motor
(M203) are faulty.
3.
The Saddle Lead Edge Stopper HP Sensor (S205) is faulty.
4.
The Saddle Lead Edge Stopper Motor (M203) is faulty.
5.
The Saddle Stitcher Controller PCB is faulty.
6.
The Finisher Controller PCB is faulty.
E5F0 -8002 -05 Title Error in the Saddle Lead Edge Stopper Motor
(Finisher-N1)
Detection description The Saddle lead edge stopper does not come off the Saddle
Lead
Edge Stopper HP Sensor when the Saddle Lead Edge Stopper Motor has been driven for 50 pulses.
Remedy
1. The connector of the Saddle Lead Edge Stopper HP Sensor
(S205)
or the Saddle Lead Edge Stopper Motor (M203) are disconnected.
2.
The wiring of the Saddle Lead Edge Stopper HP Sensor
(S205)
or the Saddle Lead Edge Stopper Motor (M203) are faulty.
3.
The Saddle Lead Edge Stopper HP Sensor (S205) is faulty.
4.
The Saddle Lead Edge Stopper Motor (M203) is faulty.
5.
The Saddle Stitcher Controller PCB is faulty.
6.
The Finisher Controller PCB is faulty.
E5F1 -8000 -05 Title Error in saddle folding
Detection description Saddle fold/feed motor rotation sensor does not come ON for
1
sec after the saddle fold/feed motor starts operation.
Remedy 1. Connector check of saddle fold/feed motor and
saddle fold/ feed motor rotation sensor
2.
Replacement of saddle fold/feed motor and saddle fold/feed motor rotation sensor
3. Replacement of saddle
controller PCB
E5F1 -8001 -05 Title Saddle folder/feeder clock error (Finisher-N1)
Detection description The drive speed of the Saddle Folder/Feeder Motor is less
than
5 mm/sec.
Remedy 1. The connector of the Saddle Folder/Feeder
Motor Sensor (S214) or the Saddle Folder/Feeder Motor (M206) are disconnected.
2.
The wiring of the Saddle Folder/Feeder Motor Sensor (S214)
or
the Saddle Folder/Feeder Motor (M206) are faulty.
3.
The Saddle Folder/Feeder Motor Sensor (S214) is faulty.
4.
The Saddle Folder/Feeder Motor (M206) is faulty.
5.
The Saddle Stitcher Controller PCB is faulty.
6.
The Finisher Controller PCB is faulty.
E5F1 -8002 -05 Title Error in the Saddle Folder/Feeder Motor (Finisher-N1)
Detection description The Saddle Folder HP Sensor does not detect the home
position
of the paper fold roller during initialization.
Remedy 1. The connector of the Saddle Folder HP Sensor
(S229) or
the
Saddle Folder/Feeder Motor (M206) are disconnected.
2.
The wiring of the Saddle Folder HP Sensor (S229) or the Saddle Folder/Feeder Motor (M206) are faulty.
3.
The Saddle Folder HP Sensor (S229) is faulty.
4.
The Saddle Folder/Feeder Motor (M206) is faulty.
5.
The Saddle Stitcher Controller PCB is faulty.
6.
The Finisher Controller PCB is faulty.
E5F2 -8001 -05 Title Error in the Saddle Roller Guide Motor (Finisher-N1)
Detection description The Saddle Roller Guide HP Sensor does not detect the
Saddle
roller guide when the saddle roller guide has been moved for 20 mm by Saddle Roller Guide Motor.
Remedy 1. The connector of the Saddle Roller Guide HP
Sensor (S207)
or
the Saddle Roller Guide Motor (M204) are disconnected.
2.
The wiring of the Saddle Roller Guide HP Sensor (S207) or the Saddle Roller Guide
Motor (M204) are faulty.
3.
The Saddle Roller Guide HP Sensor (S207) is faulty.
4.
The Saddle Roller Guide Motor (M204) is faulty.
5.
The Saddle Stitcher Controller PCB is faulty.
6.
The Finisher Controller PCB is faulty.
E5F2 -8002 -05 Title Error in the Saddle Roller Guide Motor (Finisher-N1)
Detection description The saddle roller guide does not come off the Saddle Roller
Guide
HP Sensor when the Saddle Roller Guide Motor has been driven for 50 pulses.
Remedy 1. The connector of the Saddle Roller Guide HP
Sensor (S207)
or
the Saddle Roller Guide Motor (M204) are disconnected.
2.
The wiring of the Saddle Roller Guide HP Sensor (S207) or
the
Saddle Roller Guide Motor (M204) are faulty.
3.
The Saddle Roller Guide HP Sensor (S207) is faulty.
4. The
Saddle Roller Guide Motor (M204) is faulty.
5.
The Saddle Stitcher Controller PCB is faulty.
6. The Finisher
Controller PCB is faulty.
E5F3 -8001 -05 Title Error in the Saddle Alignment Guide Motor
(Finisher-N1)
Detection description The Saddle Alignment Plate HP Sensor does not detect the
saddle
alignment guide when the saddle alignment guide has
been
moved for 177 mm by Saddle Alignment Guide Motor.
Remedy 1. The connector of the Saddle Alignment Plate HP
Sensor (S206) or the Saddle Alignment Guide Motor (M202) are disconnected.
2.
The wiring of the Saddle Alignment Plate HP Sensor (S206)
or
the Saddle Alignment Guide Motor (M202) are faulty.
3.
The Saddle Alignment Plate HP Sensor (S206) is faulty.
4.
The Saddle Alignment Guide Motor (M202) is faulty.
5.
The Saddle Stitcher Controller PCB is faulty.
6.
The Finisher Controller PCB is faulty.
E5F3 -8002 -05 Title Error in the Saddle Alignment Guide Motor
(Finisher-N1)
Detection description The saddle alignment guide does not come off the Saddle Alignment Plate HP Sensor when the Saddle
Alignment Guide Motor has been driven for 50 pulses.
Remedy 1. The connector of the Saddle Alignment Plate HP
Sensor (S206) or the Saddle Alignment Guide Motor (M202) are disconnected.
2.
The wiring of the Saddle Alignment Plate HP Sensor (S206)
or
the Saddle Alignment Guide Motor (M202) are faulty.
3.
The Saddle Alignment Plate HP Sensor (S206) is faulty.
4.
The Saddle Alignment Guide Motor (M202) is faulty.
5.
The Saddle Stitcher Controller PCB is faulty.
6.
The Finisher Controller PCB is faulty.
E5F4 -8001 -05 Title a. Error
in saddle staple b. Error in the Saddle Stitcher Motor
(Finisher-N1)
Detection description
a.
Home position cannot be detected within 500 msec after the saddle unit starts
operation.
b.
The Saddle Stitcher HP Sensor does not detect the saddle stitcher unit when the
Saddle Stitcher Motor has been driven for 480 msec.
Remedy a-1. Connector check of staple unit
a-2.
Replacement of staple unit
a-3.
Replacement of saddle controller PCB
b-1.
The connector of the Saddle Stitcher HP Sensor (S223)
or
the Saddle Stitcher Motor (M209) are disconnected.
b-2.
The wiring of the Saddle Stitcher HP Sensor (S223) or the Saddle Stitcher Motor
(M209) are faulty.
b-3.
The Saddle Stitcher HP Sensor (S223) is faulty.
b-4.
The Saddle Stitcher Motor (M209) is faulty.
b-5.
The Saddle Stitcher Controller PCB is faulty.
b-6. The Finisher
Controller PCB is faulty.
E5F4 -8002 -05 Title a. Error in saddle staple b. Error in the
Saddle Stitcher Motor (Finisher-N1)
Detection description
a.
Home position is still detected after 500 msec from the start of saddle unit operation.
b.
The Saddle Stitcher unit does not come off the Saddle Stitcher HP Sensor when the Saddle Stitcher Motor
has been driven for 480msec.
Remedy a-1. Connector check of staple unit
a-2.
Replacement of staple unit
a-3.
Replacement of saddle controller PCB
b-1.
The connector of the Saddle Stitcher HP Sensor (S223) or the Saddle Stitcher Motor (M209) are
disconnected.
b-2.
The wiring of the Saddle Stitcher HP Sensor (S223) or the
Saddle
Stitcher Motor (M209) are faulty.
b-3.
The Saddle Stitcher HP Sensor (S223) is faulty.
b-4.
The Saddle Stitcher Motor (M209) is faulty.
b-5.
The Saddle Stitcher Controller PCB is faulty.
b-6.
The Finisher Controller PCB is faulty.
E5F5 -8001 -05 Title Error in the Saddle Trailing Edge Retainer Motor
(Finisher-N1)
Detection description The Saddle Trailing Edge Retainer Move HP Sensor does not detect the saddle trailing edge retainer when the
saddle trailing edge retainer has been moved for 96 mm by Saddle Trailing Edge Retainer Motor.
Remedy 1. The connector of the Saddle Trailing Edge
Retainer Move HP Sensor (S219) or the Saddle Trailing Edge Retainer Motor (M210) are
disconnected.
2.
The wiring of the Saddle Trailing Edge Retainer Move HP Sensor (S219) or the Saddle Trailing Edge
Retainer Motor (M210) are faulty.
3.
The Saddle Trailing Edge Retainer Move HP Sensor (S219) is faulty.
4.
The Saddle Trailing Edge Retainer Motor (M210) is faulty.
5.
The Saddle Stitcher Controller PCB is faulty.
6. The Finisher
Controller PCB is faulty
E5F5 -8002 -05 Title Error in the Saddle Trailing Edge Retainer Motor
(Finisher-N1)
Detection description The Saddle trailing edge retainer does not come off the Saddle
Trailing
Edge Retainer Move HP Sensor when the Saddle Trailing Edge Retainer Motor has been driven for
50 pulses.
Remedy 1. The connector of the Saddle Trailing Edge
Retainer Move HP Sensor (S219) or the Saddle Trailing Edge Retainer Motor (M210) are
disconnected.
2.
The wiring of the Saddle Trailing Edge Retainer Move HP Sensor (S219) or the Saddle Trailing Edge
Retainer Motor (M210) are faulty.
3.
The Saddle Trailing Edge Retainer Move HP Sensor (S219) is faulty.
4.
The Saddle Trailing Edge Retainer Motor (M210) is faulty.
5.
The Saddle Stitcher Controller PCB is faulty.
6.
The Finisher Controller PCB is faulty.
E5F6 -8001 -05 Title Error in the Saddle Paper Push-on Plate Motor
(Finisher-N1)
Detection description The Saddle Paper Push-on Plate HP Sensor does not detect
the
saddle paper push-on plate when the Saddle Paper Pushon Plate Motor has been driven for 500 msec.
Remedy 1. The connector of the Saddle Paper Push-on
Plate HP Sensor (S218) or the Saddle Paper Push-on Plate Motor (M205) are disconnected.
2.
The wiring of the Saddle Paper Push-on Plate HP Sensor (S218) or the Saddle Paper Push-on Plate Motor
(M205) are faulty.
3.
The Saddle Paper Push-on Plate HP Sensor (S218) is
faulty.
4.
The Saddle Paper Push-on Plate Motor (M205) is faulty.
5.
The Saddle Stitcher Controller PCB is faulty.
6.
The Finisher Controller PCB is faulty.
E5F6 -8002 -05 Title Error in the Saddle Paper Push-on Plate Motor
(Finisher-N1)
Detection description The saddle paper push-on plate does not come off the Saddle
Paper
Push-on Plate HP Sensor when the Saddle Paper Push-on Plate Motor has been driven for 150 msec.
Remedy 1. The connector of the Saddle Paper Push-on
Plate HP Sensor (S218) or the Saddle Paper Push-on Plate Motor (M205) are disconnected.
2.
The wiring of the Saddle Paper Push-on Plate HP Sensor (S218) or the Saddle Paper Push-on Plate Motor
(M205) are faulty.
3.
The Saddle Paper Push-on Plate HP Sensor (S218) is faulty.
4.
The Saddle Paper Push-on Plate Motor (M205) is faulty.
5.
The Saddle Stitcher Controller PCB is faulty.
6. The Finisher
Controller PCB is faulty.
E5F6 -8003 -05 Title Saddle Paper Push-on Plate Motor clock error
(Finisher-N1)
Detection description The drive speed of the Saddle Paper Push-on Plate Motor is
less
than 6 clocks.
Remedy 1. The connector of the Saddle Paper Push-on
Plate Motor
Sensor
(S213) or the Saddle Paper Push-on Plate Motor (M205) are disconnected.
2.
The wiring of the Saddle Paper Push-on Plate Motor Sensor
(S213)
or the Saddle Paper Push-on Plate Motor (M205) are faulty.
3.
The Saddle Paper Push-on Plate Motor Sensor (S213) is faulty.
4.
The Saddle Paper Push-on Plate Motor (M205) is faulty.
5.
The Saddle Stitcher Controller PCB is faulty.
6.
The Finisher Controller PCB is faulty.
E5F7 -8001 -05 Title Error in the Saddle Trailing Edge Retainer Motor
(Finisher-N1)
Detection description The Saddle Trailing Edge Retainer HP Sensor does not detect
the
Saddle trailing edge retainer when the Saddle Trailing Edge Retainer Motor has been driven for 80
pulses.
Remedy 1. The connector of the Saddle Trailing Edge
Retainer HP Sensor (S221) or the Saddle Trailing Edge Retainer Motor (M210) are disconnected.
2.
The wiring of the Saddle Trailing Edge Retainer HP Sensor (S221) or the Saddle
Trailing Edge Retainer Motor (M210) are faulty.
3.
The Saddle Trailing Edge Retainer HP Sensor (S221) is faulty.
4.
The Saddle Trailing Edge Retainer Motor (M210) is faulty.
5.
The Saddle Stitcher Controller PCB is faulty.
6.
The Finisher Controller PCB is faulty.
E5F7 -8002 -05 Title Error in the Saddle Trailing Edge Retainer Motor
(Finisher-N1)
Detection description The saddle trailing edge retainer does not come off the Saddle
Trailing
Edge Retainer HP Sensor when the Saddle Trailing Edge Retainer Motor has been driven for 50
pulses.
Remedy 1. The connector of the Saddle Trailing Edge
Retainer HP Sensor (S221) or the Saddle Trailing Edge Retainer Motor (M210) are disconnected.
2.
The wiring of the Saddle Trailing Edge Retainer HP Sensor (S221) or the Saddle
Trailing Edge Retainer Motor (M210) are faulty.
3.
The Saddle Trailing Edge Retainer HP Sensor (S221) is faulty.
4.
The Saddle Trailing Edge Retainer Motor (M210) is faulty.
5.
The Saddle Stitcher Controller PCB is faulty.
6. The Finisher
Controller PCB is faulty.
E5F8 -8001 -05 Title Error in the Saddle Tapping Motor (Finisher-N1)
Detection description The Saddle Paper Tapping HP Sensor does not detect the
Saddle
tapping plate when the Saddle Tapping Motor has been driven for 50 pulses.
Remedy 1. The connector of the Saddle Paper Tapping HP
Sensor
(S215)
or the Saddle Tapping Motor (M213) are disconnected.
2.
The wiring of the Saddle Paper Tapping HP Sensor (S215) or the Saddle Tapping Motor (M213) are faulty.
3.
The Saddle Paper Tapping HP Sensor (S215) is faulty.
4.
The Saddle Tapping Motor (M213) is faulty.
5.
The Saddle Stitcher Controller PCB is faulty.
6.
The Finisher Controller PCB is faulty.
E5F8 -8002 -05 Title Error in the Saddle Tapping Motor (Finisher-N1)
Detection description The saddle tapping plate does not come off the Saddle Paper
Tapping
HP Sensor when the Saddle Tapping Motor has been driven for 50 pulses.
Remedy 1. The connector of the Saddle Paper Tapping HP
Sensor (S215) or the Saddle Tapping Motor (M213) are disconnected.
2.
The wiring of the Saddle Paper Tapping HP Sensor (S215)
or
the Saddle Tapping Motor (M213) are faulty.
3.
The Saddle Paper Tapping HP Sensor (S215) is faulty.
4.
The Saddle Tapping Motor (M213) is faulty.
5.
The Saddle Stitcher Controller PCB is faulty.
6.
The Finisher Controller PCB is faulty.
E5F9 -8001 -05 Title Error in the Saddle Lead-in Roller Disengage Motor (Finisher-N1)
Detection description The Saddle Lead-in Roller HP Sensor does not detect
the
Saddle lead-in roller when the Saddle Lead-in Roller
Disengage
Motor has been driven for 50 pulses.
Remedy 1. The connector of the Saddle Lead-in Roller HP
Sensor (S222) or the Saddle Lead-in Roller Disengage Motor (M214) are disconnected.
2.
The wiring of the Saddle Lead-in Roller HP Sensor (S222) or the Saddle Lead-in
Roller Disengage Motor (M214) are faulty.
3.
The Saddle Lead-in Roller HP Sensor (S222) is faulty.
4.
The Saddle Lead-in Roller Disengage Motor (M214) is faulty.
5.
The Saddle Stitcher Controller PCB is faulty.
6. The Finisher
Controller PCB is faulty.
E5F9 -8002 -05 Title Error in the Saddle Lead-in Roller Disengage Motor (Finisher-N1)
Detection description The saddle lead-in roller does not come off the Saddle Lead-in
Roller
HP Sensor when the Saddle Lead-in Roller Disengage
Motor
has been driven for 50 pulses.
Remedy 1. The connector of the Saddle Lead-in Roller HP
Sensor (S222) or the Saddle Lead-in Roller Disengage Motor (M214) are disconnected.
2.
The wiring of the Saddle Lead-in Roller HP Sensor (S222) or the Saddle Lead-in
Roller Disengage Motor (M214) arefaulty.
3.
The Sadd Lead-in Roller HP Sensor (S222) is
faulty.
4.
The Saddle Lead-in Roller Disengage Motor (M214) is faulty.
5.
The Saddle Stitcher Controller PCB is faulty.
6.
The Finisher Controller PCB is faulty.
E5FA -8000 -05 Title Error in saddle press
Detection description Saddle press position sensor does not come ON within 200
msec
after the saddle press motor starts operation.
Remedy 1. Replacement of saddle press motor and saddle
press position sensor
2.
Replacement of saddle controller PCB
E5FA -8001 -05 Title Error in saddle press
Detection description Saddle press HP sensor does not come ON within 1 sec after
the
saddle press motor starts operation.
Remedy 1. Replacement of saddle press motor and saddle
press HP sensor
2.
Replacement of saddle controller PCB
E5FA -8002 -05 Title Error in saddle press
Detection description Saddle press HP sensor does not go OFF within 1 sec after
the
saddle press motor starts operation.
Remedy 1. Replacement of saddle press motor and saddle
press HP sensor
2.
Replacement of saddle controller PCB
E5FB -8001 -05 Title Error in saddle disengage operation
Detection description Saddle lead-in roller HP sensor does not come ON within
5
sec after the saddle lead-in roller disengage motor starts operation.
Remedy 1. Check of saddle lead-in roller disengage motor
and saddle lead-in roller HP sensor
2.
Replacement of saddle lead-in roller disengage motor and saddle lead-in roller HP
sensor
3. Replacement of saddle
controller PCB
E5FB -8002 -05 Title Error in saddle disengage operation
Detection description Saddle lead-in roller HP sensor does not go OFF within 5 sec
after
the saddle lead-in roller disengage motor starts operation.
Remedy 1. Check of saddle lead-in roller disengage
motor and saddle lead-in roller HP sensor
2.
Replacement of saddle lead-in roller disengage motor and
saddle
lead-in roller HP sensor
3.
Replacement of saddle controller PCB
E5FC -8001 -05 Title Error in saddle knocking motor
Detection description Saddle paper knocking HP sensor does not come ON within 5
sec
after the saddle knocking motor starts operation.
Remedy 1. Check of saddle knocking motor and saddle
paper knocking HP sensor
2.
Replacement of saddle knocking motor and saddle paper knocking HP sensor
3.
Replacement of saddle controller PCB
E5FC -8002 -05 Title Error in saddle knocking motor
Detection description Saddle paper knocking HP sensor does not come OFF within
5
sec after the saddle knocking motor starts operation.
Remedy 1. Check of saddle knocking motor and saddle
paper knocking HP sensor
2.
Replacement of saddle knocking motor and saddle paper knocking HP sensor
3.
Replacement of saddle controller PCB
E5FD -8001 -05 Title Error in saddle trailing edge holding shift motor
Detection description Saddle trailing edge holding shift HP sensor does not come
ON
within 5 sec after the saddle training edge holding shift motor starts operation.
Remedy 1. Check of saddle trailing edge holding shift
motor and saddle trailing edge holding shift HP sensor
2.
Replacement of saddle trailing edge holding shift motor and saddle trailing edge
holding shift HP sensor
3.
Replacement of saddle controller PCB
E5FD -8002 -05 Title Error in saddle trailing edge holding shift motor
Detection description Saddle trailing edge holding shift HP sensor does not come
OFF
within 5 sec after the saddle training edge holding shift motor starts operation.
Remedy 1. Check of saddle trailing edge holding shift
motor and saddle trailing edge holding shift HP sensor
2.
Replacement of saddle trailing edge holding shift motor and
saddle
trailing edge holding shift HP sensor
3. Replacement of saddle
controller PCB
E5FE -8001 -05 Title Error in saddle trailing edge holding motor
Detection description Saddle trailing edge retainer HP sensor does not come ON
within
5 sec after the saddle training edge holding motor starts operation.
Remedy 1. Check of saddle trailing edge holding motor
and saddle
trailing
edge retainer HP sensor
2.
Replacement of saddle trailing edge holding motor and
saddle
trailing edge retainer HP sensor
3.
Replacement of saddle controller PCB
E5FE -8002 -05 Title Error in saddle trailing edge holding motor
Detection description Saddle trailing edge retainer HP sensor does not come OFF
within
5 sec after the saddle training edge holding motor starts operation.
Remedy 1. Check of saddle trailing edge holding motor
and saddle
trailing
edge retainer HP sensor
2.
Replacement of saddle trailing edge holding motor and
saddle
trailing edge retainer HP sensor
3. Replacement of saddle
controller PCB
No comments:
Post a Comment