E202 -0001 -04 Title Scanner HP error
Remedy 1. Connector disconnection/open
circuit of the Scanner HPSensor (SR2).
2. Failure of the Scanner HP Sensor
(SR2).
3. Failure of the Scanner Motor
(M1).
4. Failure of the Reader Controller
PCB (PCB1).
Description An error occurs during the Scanner
Unit (Paper Front) HP
detection operation (outward).
E202 -0002 -04 Title
Scanner HP error
Remedy 1. Connector disconnection/open
circuit of the Scanner HPSensor (SR2).
2. Failure of the Scanner HP Sensor
(SR2).
3. Failure of the Scanner Motor
(M1).
4. Failure of the Reader Controller
PCB (PCB1).
Description An error occurs during the Scanner
Unit (Paper Front) HP detection operation (homeward).
E202 -0101 -04 Title Glass
HP error
Remedy 1. Connector disconnection/open
circuit of the Glass Shift HP Sensor (SR11).
2. Failure of the Glass Shift HP
Sensor (SR11).
3. Failure of the Glass Shift Motor
(M9).
4. Failure of the DADF Driver PCB
(PCB1).
Description An error occurs during the Glass HP
detection operation (outward).
E202 -0102 -04 Title Glass
HP error
Remedy 1. Connector disconnection/open
circuit of the Glass Shift HP Sensor (SR11).
2. Failure of the Glass Shift HP
Sensor (SR11).
3. Failure of the Glass Shift Motor
(M9).
4. Failure of the DADF Driver PCB
(PCB1).
Description An error occurs during the Glass HP
detection operation (homeward).
E227 -0001 -04 Title Power
supply (24V) error
Remedy 1. Connector disconnection/open circuit of the Reader
Power Supply.
2. Failure of power supply.
Description 24V port is OFF when the power is
turned ON.
E227 -0002 -04 Title Power
supply (24V) error
Remedy 1. Connector disconnection/open circuit of the Reader
Power Supply.
2. Failure of power supply.
Description 24V port is OFF when a job is started.
E227 -0003 -04 Title Power
supply (24V) error
Remedy 1. Connector disconnection/open
circuit of the Reader Power Supply.
2. Failure of power supply.
Description 24V port is OFF when a job is
ended.
E227 -0004 -04 Title Power
supply (24V) error
Remedy 1. Connector disconnection/open circuit of the Reader
Power Supply.
2. Failure of power supply.
Description 24V port is OFF when loading.
E227 -0101 -04 Title Power
supply (24V) error
Remedy 1. Connection error between the DADF Driver PCB (PCB1) and
the Reader Controller PCB (PCB1).
2. Connector disconnection/open
circuit of the Reader Power Supply.
3. Failure of power supply.
Description 24V port is OFF when the power of
DADF is turned ON.
E227 -0102 -04 Title Power
supply (24V) error
Remedy 1. Connection error between the DADF Driver PCB (PCB1) and
the Reader Controller PCB (PCB1).
2. Connector disconnection/open
circuit of the Reader Power Supply.
3. Failure of power supply.
Description 24V port is OFF when a job is
started in the DADF.
E227 -0103 -04 Title Power
supply (24V) error
Remedy 1. Connection error between the DADF Driver PCB (PCB1) and
the Reader Controller PCB (PCB1).
2. Connector disconnection/open
circuit of the Reader Power Supply.
3. Failure of power supply.
Description 24V port is OFF when a job is ended
in the DADF.
E240 -0000 -05 Title
Communication error between Main Controller and DC Controller
Remedy 1. Check the connection of the Main Controller PCB and
the
DC Controller PCB (PCB1). Main
Controller side: J712, DC Controller side: J442
2. Replace the DC Controller PCB
(PCB1).
3. Replace the Main Controller PCB.
Description Communication error occurs between
the CPU of the Main
Controller PCB and the DC Controller PCB (PCB1).
E240 -0001 -05 Title 3
minutes passed with pickup request waiting status
Remedy 1. Check the connection of the Connector.
2. Check the connection of the Sub
PCB in the Main Controller PCB 1 Box.
3. Check the connections of the DC
Controller PCB and the
Main Controller PCB 1. Replace the
PCB(s) if necessary.
Description It was detected that 3 minutes
passed with pickup request waiting status.
E240 -0002 -05 Title 3
minutes passed with image output request waiting status
Remedy 1. Check the connection of the
Connector. 2. Check the connection of the Sub PCB in the Main Controller PCB 1
Box.
3. Check the connections of the DC
Controller PCB and the Main Controller PCB 1. Replace the PCB(s) if necessary.
Description It was detected that 3 minutes
passed with image output request waiting status.
E240 -0003 -05 Title
Software sequence error after the jam
Remedy 1. Check the connection of the Connector.
2. Check the connection of the Sub
PCB in the Main Controller PCB 1 Box.
3. Check the connections of the DC
Controller PCB and the Main Controller PCB 1. Replace the PCB(s) if necessary.
Description A software sequence error (engine
bug) was detected after the jam.
E246 -0001 -00 Title
System error
Remedy Contact to the sales
companies.
Description ---
E246 -0002 -00 Title
System error
Remedy Contact to the sales
companies.
Description ---
E246 -0003 -00 Title
System error
Remedy Contact to the sales
companies.
Description ---
E246 -0005 -00 Title
System error
Remedy Contact to the sales
companies.
Description ---
E247 -0001 -00 Title
System error
Remedy Contact to the sales
companies.
Description ---
E247 -0002 -00 Title
System error
Remedy Contact to the sales
companies.
Description ---
E247 -0003 -00 Title
System error
Remedy Contact to the sales
companies.
Description ---
E247 -0004 -00 Title
System error
Remedy Contact to the sales companies.
Description ---
E248 -0000 -00 Title SRAM
error
Remedy Main Controller PCB 2.
Description SRAM check error when the power is
turned ON.
E248 -0001 -04 Title
EEPROM error
Remedy Failure of the Reader Controller PCB (PCB1).
Description An error when EEPROM power for the
Reader Controller PCB (PCB1) is turned ON.
E248 -0002 -04 Title
EEPROM error
Remedy Failure of the Reader Controller PCB (PCB1).
Description EEPROM writing error for the Reader
Controller PCB (PCB1).
E248 -0003 -04 Title
EEPROM error
Remedy Failure of the Reader Controller PCB (PCB1).
Description Reading error after writing to
EEPROM for the Reader Controller PCB (PCB1).
E263 -0000 -05 Title Error
in Current Sensor reference voltage generation
Remedy 1. Check the connection between the AC Driver PCB and
the Main Driver PCB (connector disconnection, open circuit, short circuit of
harness). AC Driver side: J615, Main Driver side: J103
2. Replace the AC Driver PCB.
3. Replace the Main Driver PCB
(PCB2).
Description The reference voltage is not within
the range of reference value.
E263 -0001 -05 Title
Current Sensor error
Remedy 1. Check the connection between the AC Driver PCB and
the Main Driver PCB (connector disconnection, open circuit, short circuit of
harness).
AC Driver side: J615, Main Driver
side: J103
2. Replace the AC Driver PCB.
3. Replace the Main Driver PCB
(PCB2).
Description An error is detected in the value
of the Current Sensor (SE601)
(the value remains at the upper limit).
E263 -0002 -05 Title Current
Sensor error
Remedy 1. Check the connection between the AC Driver PCB and
the Main Driver PCB (connector disconnection, open circuit, short circuit of
harness). AC Driver side: J615, Main Driver side: J103
2. Replace the AC Driver PCB.
3. Replace the Main Driver PCB
(PCB2).
Description An error is detected in the value
of the Current Sensor (SE601) (the value remains at the lower limit).
E263 -0003 -05 Title Error
in Current Sensor accuracy
Remedy 1. Check the connection between the AC Driver PCB and the
Main Driver PCB (connector disconnection, open circuit,short circuit of
harness). AC Driver side: J615, Main Driver side: J103
2. Replace the AC Driver PCB.
3. Replace the Main Driver PCB
(PCB2).
Description The value of the Current Sensor
(SE601) is not within the range of reference value.
E270 -0001 -04 Title Error
in paper front vertical scanning synchronous signal
Remedy 1. Connector disconnection/open circuit of the Scanner
Unit (Reader).
2. Connector disconnection/open
circuit of the Reader Controller PCB (PCB1).
3. Failure of the Scanner Unit
(Reader).
4. Failure of the Reader Controller
PCB (PCB1).
Description Vertical scanning synchronous
signal (VSYNC) is not sent appropriately from the CMOS PCB (Scanner Unit (Paper
Front)), so the image error occurs or the operation stops abnormally.
E270 -0002 -04 Title Error
in horizontal scanning/vertical scanning synchronous signal
Remedy 1. Connector disconnection/open circuit of the Scanner
Unit (Reader/DADF).
2. Connector disconnection/open
circuit of the Reader Controller PCB (PCB1).
3. Failure of the Scanner Unit
(Reader/DADF).
4. Failure of the Reader Controller
PCB (PCB1).
Description Due to the horizontal scanning
synchronous signal (HSYNC) error, the vertical scanning synchronous signal
(VSYNC) is not sent, so the image error occurs or the operation stops abnormal
E270 -0101 -04 Title Error
in paper back vertical scanning synchronous signal
Remedy 1. Connector disconnection/open circuit of the Scanner
Unit (DADF).
2. Connector disconnection/open
circuit of the Reader Controller PCB (PCB1).
3. Failure of the Scanner Unit
(DADF).
4. Failure of the Reader Controller
PCB (PCB1).
Description Vertical scanning synchronous
signal (VSYNC) is not sent appropriately from the CMOS PCB (Scanner Unit (Paper
Back)), so the image error occurs or the operation stops abnormally.
E280 -0001 -04 Title
Communication error between Reader Controller PCB (PCB1)
and Scanner Unit (Reader)
Remedy 1. Connector disconnection/open
circuit of the Scanner Unit (Reader).
2. Connector disconnection/open
circuit of the Reader Controller PCB (PCB1).
3. Failure of the Scanner Unit
(Reader).
4. Failure of the Reader Controller
PCB (PCB1).
Description Within the specified period of time,
communication between
the Reader Controller PCB and
Scanner Unit (Paper Front) is not started.
E280 -0101 -04 Title
Communication error between Reader Controller PCB (PCB1) and Scanner Unit
(DADF)
Remedy 1. Connector disconnection/open
circuit of the Scanner Unit (DADF).
2. Connector disconnection/open
circuit of the Reader Controller PCB (PCB1).
3. Failure of the Scanner Unit
(DADF).
4. Failure of the Reader Controller
PCB (PCB1).
Description Within the specified period of time,
communication between the Reader Controller PCB and Scanner Unit (Paper Back)
is
not started
No comments:
Post a Comment