E710 -0001 -00 Title Printer IPC error
Remedy Disconnection of cable.
Description Error is detected by IPC
communication IC of the printer engine at power ON.
E711 -0001 -00 Title IPC
communication error
Remedy Check the Cable.
Description Occurrence of error was set for 4
times or more for 1.5 seconds to the error register of the IPC Chip.
E711 -0001 -05 Title IPC
communication error (retransmission request reception error)
Remedy 1. Check the cable connection. Check the connection
between DCON side (J462) and
Finisher Lattice side (J9043) Finisher
Cable
2. Replace the DC Controller PCB.
Description Communication between the host
machine and the Finisher was lost.
E711 -0002 -05 Title IPC
communication error (reception timeout)
Remedy 1. Check the cable connection. Check
the connection between DCON side (J462) and
Finisher Lattice side (J9043) Finisher
Cable
2. Replace the DC Controller PCB.
Description Communication between the host
machine and the Finisher was lost.
E711 -0004 -05 Title IPC
communication error (checksum error)
Remedy 1. Check the cable connection. Check
the connection between DCON side (J462) and
Finisher Lattice side (J9043) Finisher
Cable
2. Replace the DC Controller PCB.
Description Communication between the host
machine and the Finisher was lost.
E711 -0020 -05 Title IPC
communication error (recovery error)
Remedy 1. Check the cable connection. Check the connection
between DCON side (J462) and
Finisher Lattice side (J9043) Finisher
Cable
2. Replace the DC Controller PCB.
Description Communication between the host
machine and the Finisher was lost.
E711 -0040 -05 Title IPC
communication error (serial error)
Remedy 1. Check the cable connection. Check
the connection between DCON side (J462) and
Finisher Lattice side (J9043)Finisher
Cable 2. Replace the DC Controller PCB.
Description Communication between the host
machine and the Finisher was lost.
E713 -0001 -05 Title
Finisher IPC communication error (retransmission request reception error)
Remedy 1. Check the cable connection of the Finisher. DC
Controller side: J462, Finisher Lattice side: J9043 2. Replace the Finisher Controller PCB.
Description Communication between the host
machine and the Finisher was lost.
E713 -0002 -05 Title
Finisher IPC communication error (reception timeout)
Remedy 1. Check the cable connection of the Finisher. DC
Controller side: J462, Finisher Lattice side: J9043
2. Replace the Finisher Controller
PCB.
Description Communication between the host
machine and the Finisher was lost.
E713 -0004 -05 Title
Finisher IPC communication error (checksum error)
Remedy 1. Check the cable connection of the
Finisher. DC Controller side: J462, Finisher Lattice side: J9043
2. Replace the Finisher Controller
PCB.
Description Communication between the host
machine and the Finisher was lost.
E713 -0020 -05 Title
Finisher IPC communication error (recovery error)
Remedy 1. Check the cable connection of the
Finisher. DC Controller side: J462, Finisher Lattice side: J9043
2. Replace the Finisher Controller
PCB.
Description Communication between the host
machine and the Finisher was lost.
E713 -0040 -05 Title
Finisher IPC communication error (serial error)
Remedy 1. Check the cable connection of the Finisher. DC
Controller side: J462, Finisher Lattice side: J9043
2. Replace the Finisher Controller
PCB.
Description Communication between the host
machine and the Finisher was lost.
No comments:
Post a Comment